- -8%
Reference: 27 2728.C0
Set of 3 pre-cut MALOSSI carbon valve slats Peugeot fox, scooters & Honda wallaroo
Out of the ordinary finish. Here are valves that will bring you reliability, longevity and power.
Banner
Not approved for public roads, does not respect the authorized 50cc displacement.
To accompany your head MALOSSI origin or available from us Accessory link.
Here the cylinder head without 70cc in diameter 47mm from MALOSSI, cast iron piston kit with its reinforced - prepared and 2 segments, it is really very strong, but also by its powerful diagrams well defined, its diameter 47mm and admission. 6 transfers are clean and very well finished with an oval tailpipe as the original but significantly increased in comparison to the latter.
It comes with carbon flaps allowing it to be very complete and efficient, we recommend that the those who want to ride every day (except France) and have lots of torque without neglecting the tip. This type of cylinder can easily do 25,000 km by changing the piston every 10 000 km.
In unprepared version, it can develop up to 8 horses. It also has reinforced ring gasket which is significant on this engine because it ensures better compression and engine sealing.
We recommend to accompany this high engine with at least: breech original in excellent condition or MALOSSI high compression, carburizing adapted from 17.5 to 21mm depending on your usage, your required setting transmission / drive, relaxing muffler racing, racing candle, 100% synthetic engine oil, reinforced crankshaft with bearings for the best ...
This pack ontains:
-cylinder Ø47mm cast
-piston Bi-lateral segments Ø47mm with grease and preparation on the rear skirt
X2 thickness Ø47mm segments
Axis-Ø12mm piston and clips
Carbon valve -Lamelle
-Stud Exhaust
-pack Reinforced seams
-Autocollants
-Notice, Booklet &
Itself on:
-Honda BALI 50 2T
-Honda SH 50 2T 1996->
-Honda SFX 50 2T
-Honda SGX SKY 50 2T
-Honda SXR 50 2T
And other models ...
Optional we offer a preparation course 1, this preparation is a modification of the channels and the exhaust port by increasing the charts and improvement of the duct, it increases the cylinder performance. Improved piston and bottom skirt is also included in the amendment. Allow a little extra time for this preparation!
Reference: 27 2728.C0
Out of the ordinary finish. Here are valves that will bring you reliability, longevity and power.
Reference: 27 2728.KO
Set of 3 blades for push or original engines. To make a perfect adjustment of your gear.
Reference: 36 4450
Do not forget to change at each winding to prevent engine failure thereafter.
Reference: 19 3298E
Set of 2 M6 studs which can be used for many applications.
Reference: 2311783B
Piston pin with shaped clips "C", essential for refurbishment quality and reliable.
Reference: 35 4501
Ideal in case of starting tightening, heating ... for refurbishment!
Reference: 34 7036
The spare piston diameter 47mm for 70cc MALOSSI cast iron kits on scooters like HONDA, PIAGGIO, PEUGEOT, MINARELLI VERTICAL and HORIZONZAL ...
Reference: 31 8734
A complete kit for more torque and strength on the engine of your scooter!
Reference: 11 9574
Ideal for safe and leak-free reassembly.
Reference: 06 4993B
Spare O-ring for the refurbishment of your engine compression!
Reference: 38 7757
The spare cylinder head for your kit 70cc Ø47mm cast on scooter Honda BALI.
Reference: 02042146
Powerful and strong, this 70cc is an excellent quality / price / power! Comes with rollers and drive part, to head home!
Reference: CI.26.651.G
The only aluminum kit and the most powerful kit available for this engine architecture!
Reference: 02160246
Escapement barrete, piston mono-segment, 46mm in diameter! A good little monster power!
Reference: 31 6405
Very torquey and robust kit for HONDA AERO / VISION engine, also mounted on PEUGEOT RAPIDO, ST and KYMCO DJ X 50!
Reference: 31 6170
A high engine without cylinder head 70cc solid and torquey, ideal for increasing your performance, to accompany with the MALOSSI high compression cylinder head.
Reference: 072000
Cylinder - piston cylinder head without announcing great performance while maintaining high strength.
Reference: 070400
A complete kit combines sturdiness and reliability!
Reference: CIL-714
Ideal for refurbishment resume without a complete kit, delivered without cylinder head.
Reference: CIL-705
Ideal together to improve performance, all at a lower cost!
Reference: 072100
A magnificent kit which announces great performance while preserving great strength.
Reference: CIL-730
A good kit without cylinder head, ideal to refurbish your engine with more performance!
Reference: 119.0078/ST
Ideal for a good increase of power with simplicity and solidity.
Reference: 31 8734
A complete kit for more torque and strength on the engine of your scooter!
Reference: 02044146
Powerful and strong, this 70cc is an excellent quality / price / power!
Reference: EQ-714
Ideal for a small configue coupleuse! Size transfer origin, strength, simplicity, performance guaranteed!
Reference: 02042848
Cylinder piston with segments for scooter HONDDA VISION 80cc.