Reference: 041318476
Cylinder head Ø47,6mm for kit 70cc AIRSAL mono-segment on vertical scooter minarelli
Replacement cylinder head diameter 47.6mm for 70cc single-segment AIRSAL kit. Incoming pattern to line up with the cylinder.
Banner
Attention parts only reserved for the competition, prohibited on open road!
Here is the best value kits 70cc aluminum market. This is the AIRSAL T6 70cc Ø47,6mm. This cylinder low price does not neglect the quality or performance, 47,6mm diameter high-end aluminum. It has 5 transfers of admission and an exhaust with bar with a well worked specific form.
Charts are pretty high at admission and low enough to escape making the torquey and not difficult to follow or set. The engine cooling will also better thanks to the aluminum alloys used, which at the same time provide more power.
The piston is a mono-segment model with side grease and mild preparation in the rear skirt, which optimizes the scanning and lubricate the base engine. The finish is clean and decent for the price. We advise you to align transfers to lower casings engine.
The cylinder head is a model high compression, the chamber is incoming to have good alignment chamber / cylinder is a good performance head gasket. The room is hemispherical in shape, polished finish. It will certainly be less effective than MALOSSI MHR, BIDALOT or Polini ... But there will already very good.
Clearly, this kit has a very good ratio torque / power, it offers plenty of performance while preserving a great strength! An excellent quality / price / power.
We recommend to accompany this kit with at least: a carburetor 19 mm (carbon flaps slats 0.30mm or 0.35mm) or 21 for the best, crankshaft and reinforced bearings, exhaust racing, cold candle racing, 100% synthetic oil, ...
contains:
X1 Cylinder
X1 Cylinder
X1 Piston
X1 Segment
X1 Piston Pin
X2 piston Clips
X1 Pack seals
X1 Screws
X1 Instructions
Optional we offer a preparation course 1, this preparation is a modification of the channels and the exhaust port by increasing the charts and improvement of the duct, it increases the cylinder performance. Improved piston and bottom skirt is also included in the amendment. Allow a little extra time for this preparation!
Itself on:
APRILIA AMICO
Aprilia SR (before 1993 only)
FANTIC BIG WHEEL
CARELLI PONY
GARELLI SR
ITALJET BAZOOKA
ITALJET PISTA
ITALJET REPORTER
ITALJET SCOOP
ITALJET YANKEE
ITALJET ASCOT
ITALJET ASTRA
LEM FLASH
LEM GHIBLI
LEM TORNADO
LEM TORNADO SS1
KOTIR SR
KTM CHRONO
MBK BOOSTER
MBK BOOSTER NAKED
MBK BOOSTER ROCKET
MBK BOOSTER NEXT GENERATION (NG)
MBK BOOSTER CW
MBK BOOSTER SPIRIT
MBK STUNT
MBK TARGET
MBK BOOSTER TRACK
YAMAHA BW'S
YAMAHA BW's NG
YAMAHA BW'S ORIGINAL
YAMAHA BW'S NAKED
YAMAHA CRZ
YAMAHA CT
YAMAHA SLIDER
YAMAHA SPY
YAMAHA ZUMA
And other models ...
Reference: 041318476
Replacement cylinder head diameter 47.6mm for 70cc single-segment AIRSAL kit. Incoming pattern to line up with the cylinder.
Reference: 061318476
Spare piston mono-segment for aluminum kit 70cc on minarelli vertical.
Reference: 111318476 - 110617476 - 111316476 - 110255476 ...
Ideal in case of loss of compression to deliver its high engine renovated.
Reference: 021318476
Excellent quality / price ratio, offers very good performance, in support of its high compression cylinder head. With 5 admission transfers, an exhaust with bar with spéciffique architecture, ...
Reference: 76710.00
A high reliable, solid and powerful engine for your vertical minarelli motor scooter. Version axis diameter 12mm, model GP1.
Reference: 166.0074/R
The famous POLINI RACING CORSA kit! Super efficient and super robust!
Reference: 166.0079
The excellent POLINI aluminum kit with W-shaped exhaust!
Reference: 76840.00
A reliable, solid and efficient high engine for your vertical minarelli motor scooter. Available in 10 or 12mm axle choices. RACING version.
Reference: 30420.M3
A super powerful and solid kit with a good quality for your boosters!
Reference: 31 8501
A super powerful replica version for your booster! MALOSSI quality = maximum strength on an aluminum!
Reference: 9921640
A 100% complete, powerful, solid and reliable 70cc aluminum kit for MINARELLI & YAMAHA Vertical air-cooled engine.
Reference: 31 7559
For more performance and a solid engine! This kit 70cc will be very good to equip your scooter with low engine Minarelli / Yamaha Vertical Air.
Reference: 9909620
A high 70cc engine Ø47mm solid and above all powerful.
Reference: KT00088
Solid and above all torque-based, the high 70cc Ø47mm engine will be ideal for increasing your performance while maintaining excellent engine reliability.
Reference: 070100
A high-end 70cc engine kit with a choice of 10 or 12mm axle.
Reference: H01138647
A much stronger kit than the AIRSAL in aluminum and very torquey. A perfect kit to ride all day and long distance without fear of a heater or primer.
Reference: 31 7237
An excellent torque / power ratio, top strength for your MBK BOOSTER, SPIRIT, STUNT, YAMAHA BW'S, SLIDER...
Reference: 166.0054
A small 70cc cast iron kit made for the original cylinder head! High quality, low price!
Reference: 76595.00
High high performance engine, huge 50mm diameter, huge bar exhaust, high compression ratio ... Very heavy!
Reference: 30420.M
A very torquey kit for your booster with a very high quality.