
Reference: 57850.16
1 chrome segment hard Ø47mm X 1mm for kit cast PARMAKIT Racing
Segment spare indispensable for the maintenance of your cylinder diameter 47mm.
Banner
Not homologated, strictly prohibited on the road, reserved for competition and closed, private circuits.
The most racing cast iron kit from the Italian company PARMAKIT (with the special 43mm stroke), the RACING is a very powerful model in Ø47mm therefore 70cc cast iron.
Compared to the sport model, this kit is based on a higher speed, its mono segment allows it to take turns faster and more extensively. PARMAKIT has equipped this kit with a graphite-treated piston with a high silicon content, an ultra-solid domed hard chrome segment with a lower contact surface for even better performance.
The cylinder remains identical to the sport model, it is a very good cast iron cylinder, the finish is good, the exhaust has a special shape, the intake is revised and corrected and the diagrams are quite high. We can compare this kit to the POLINI corsa or TOP PERFORMANCES racing cast iron power level.
The cylinder head is a high compression model, revised for better cooling, the combustion chamber is high compression, tapered and polished.
This cylinder head is mounted on an O-ring like all real racing kits, it advantageously replaces the aluminum type seal for more solidity. This kit is recommended for everyday riding (outside France), for stunts and racing, it is very powerful and above all it maintains maximum strength.
We advise to accompany this kit with : reinforced crankshaft, reinforced bearings set C3 or C4, carburation 19mm minimum recommended, racing exhaust.
The kit includes :
Mono segment racing piston d.47mm
1 segment d.47mm
2 piston clips d.10mm or 12mm
Piston pin d.10mm or 12mm
Cast iron racing cylinder
Complete seal pack
PARMAKIT sticker
Notice
Cylinder head d.47mm
As an option we offer you a stage 1 preparation, this preparation is a modification of the channels and the exhaust port by increasing the diagrams and improving the duct, it increases the performance of the cylinder. An improvement of the piston and the lower skirts is also included in this modification. Count a little extra time for this preparation!
Mounts on :
APRILIA AMICO
APRILIA SR (before 1993 only)
FANTIC BIG WHEEL
CARELLI PONY
GARELLI SR
ITALJET BAZOOKA
ITALJET PISTA
ITALJET REPORTER
ITALJET SCOOP
ITALJET YANKEE
ITALJET ASCOT
ITALJET ASTRA
LEM FLASH
LEM GHIBLI
LEM TORNADO
LEM TORNADO SS1
KOTIR SR
KTM CHRONO
MBK BOOSTER
MBK BOOSTER NAKED
MBK BOOSTER ROCKET
MBK BOOSTER NEXT GENERATION (NG)
MBK BOOSTER CW
MBK BOOSTER SPIRIT
MBK STUNT
MBK TARGET
MBK BOOSTER TRACK
YAMAHA BW'S
YAMAHA BW'S NG
YAMAHA BW'S ORIGINAL
YAMAHA BW'S NAKED
YAMAHA CRZ
YAMAHA CT
YAMAHA SLIDER
YAMAHA SPY
YAMAHA ZUMA
And other models...
Reference: 57850.16
Segment spare indispensable for the maintenance of your cylinder diameter 47mm.
Reference: 76507.03
Essential for the refurbishment of your high engine PARMAKIT 70 / 75cc in diameter 47mm.
Reference: 76840.02
A good quality piston, delivered complete for a refurbishment of your cylinder.
Reference: 76565.04
PARMAKIT aluminum spare cylinder head for Kit 70 and 75cc Ø47mm cast iron PARMAKIT Sport on scooter MINARELLI Vertical.
Reference: H01138647
A much stronger kit than the AIRSAL in aluminum and very torquey. A perfect kit to ride all day and long distance without fear of a heater or primer.
Reference: 30420.M3
A super powerful and solid kit with a good quality for your boosters!
Reference: 76590.00
A magnificent kit with bar exhaust and piston mono segment in Ø47,6mm, special long stroke 80mm rod (or 85mm with 5mm shim).
Reference: 76840.00
A reliable, solid and efficient high engine for your vertical minarelli motor scooter. Available in 10 or 12mm axle choices. RACING version.
Reference: 9921640
A 100% complete, powerful, solid and reliable 70cc aluminum kit for MINARELLI & YAMAHA Vertical air-cooled engine.
Reference: KT00088
Solid and above all torque-based, the high 70cc Ø47mm engine will be ideal for increasing your performance while maintaining excellent engine reliability.
Reference: 76710.00
A high reliable, solid and powerful engine for your vertical minarelli motor scooter. Version axis diameter 12mm, model GP1.
Reference: 011335476
A great kit cheap, powerful and torquey!
Reference: 76506.00
A high reliable, solid and efficient cast iron engine for your vertical minarelli motor scooter. Available in 10 or 12mm axle to choose from SPORT version.
Reference: P400485100089
A high performance 70cc engine kit, racing version with a choice of 10 or 12mm axle.
Reference: 01131246
A very good 70cc for a maximum of high speed and torque.
Reference: 9909620
A high 70cc engine Ø47mm solid and above all powerful.
Reference: 070100
A high-end 70cc engine kit with a choice of 10 or 12mm axle.
Reference: 166.0079
The excellent POLINI aluminum kit with W-shaped exhaust!
Reference: 10041403
Reference: 31 7237
An excellent torque / power ratio, top strength for your MBK BOOSTER, SPIRIT, STUNT, YAMAHA BW'S, SLIDER...