Reference: 041318476
Cylinder head Ø47,6mm for kit 70cc AIRSAL mono-segment on vertical scooter minarelli
Replacement cylinder head diameter 47.6mm for 70cc single-segment AIRSAL kit. Incoming pattern to line up with the cylinder.
Banner
Piece unapproved! Only reserved for the competition, with closed circuits and tracks.
Here is the 70cc AIRSAL LUXE for minarelli vertical (booster ...). This model has a very good power as increasing the torque of the scooter! The while maintaining great strength. The cylinder is an aluminum 5 transfers + add skirt, high quality nikasil treatment, standardized oval exhaust ... Cooling was very well thought out! The admission has also been improved somewhat.
The piston is a two-segment model (including a bulging hard chrome for the top of the piston), that piston has two rear machining for an improvement of the filling / scan. A cylinder head high compression hemispherical chamber model polished finish. Clearly, this kit is very solid, it offers a great couple but also good power. Nothing to do with 50cc ... It has more of a quality / price unbeatable!
We advise to accompany this kit with at least: 18mm carburetor (in PHBG), crankshaft and reinforced bearings C3 play, exhaust racing, cold candle racing (B10 HS or B9HS summer and for winter).
This pack contains:
Aluminum cylinder d.47,6mm nykasil
Bi-piston segments
Segment hard chrome domed segment d.47mm + standard for the lower piston
Piston pin reinforced d.10mm
Piston clips (axis rushes) in G
Full Pack reinforced gasket
D.47mm polished cylinder head high compression hemispherical
notice
Optional we offer a preparation course 1, this preparation is a modification of the channels and the exhaust port by increasing the charts and improvement of the duct, it increases the cylinder performance. Improved piston and bottom skirt is also included in the amendment. Allow a little extra time for this preparation!
Itself on:
APRILIA AMICO
Aprilia SR (before 1993 only)
FANTIC BIG WHEEL
CARELLI PONY
GARELLI SR
ITALJET BAZOOKA
ITALJET PISTA
ITALJET REPORTER
ITALJET SCOOP
ITALJET YANKEE
ITALJET ASCOT
ITALJET ASTRA
LEM FLASH
LEM GHIBLI
LEM TORNADO
LEM TORNADO SS1
KOTIR SR
KTM CHRONO
MBK BOOSTER
MBK BOOSTER NAKED
MBK BOOSTER ROCKET
MBK BOOSTER NEXT GENERATION (NG)
MBK BOOSTER CW
MBK BOOSTER SPIRIT
MBK STUNT
MBK TARGET
MBK BOOSTER TRACK
YAMAHA BW'S
YAMAHA BW's NG
YAMAHA BW'S ORIGINAL
YAMAHA BW'S NAKED
YAMAHA CRZ
YAMAHA CT
YAMAHA SLIDER
YAMAHA SPY
YAMAHA ZUMA
And other models ...
Reference: 041318476
Replacement cylinder head diameter 47.6mm for 70cc single-segment AIRSAL kit. Incoming pattern to line up with the cylinder.
Reference: 061335476
Ideal if worn, bait, maintenance on your kit 47,6mm AIRSAL booster, bw's ...
Reference: 111335476
Segments of replacement for your piston AIRSAL 70cc, ideal for refurbishing.
Reference: H01138647
A much stronger kit than the AIRSAL in aluminum and very torquey. A perfect kit to ride all day and long distance without fear of a heater or primer.
Reference: 070100
A high-end 70cc engine kit with a choice of 10 or 12mm axle.
Reference: 011335476
A great kit cheap, powerful and torquey!
Reference: P400485100089
A high performance 70cc engine kit, racing version with a choice of 10 or 12mm axle.
Reference: 011318476
Excellent quality / price ratio, offers very good performance. With 5 admission transfers, an exhaust with bar with spéciffique architecture, high-compression cylinder head ...
Reference: 31 8501
A super powerful replica version for your booster! MALOSSI quality = maximum strength on an aluminum!
Reference: 31 7559
For more performance and a solid engine! This kit 70cc will be very good to equip your scooter with low engine Minarelli / Yamaha Vertical Air.
Reference: 01131246
A very good 70cc for a maximum of high speed and torque.
Reference: 76590.00
A magnificent kit with bar exhaust and piston mono segment in Ø47,6mm, special long stroke 80mm rod (or 85mm with 5mm shim).
Reference: EQ-920-S
A little sensational monster ... with power and torque!
Reference: 76710.00
A high reliable, solid and powerful engine for your vertical minarelli motor scooter. Version axis diameter 12mm, model GP1.
Reference: 166.0074
Very torquey and solid kit in 70cc for booster.
Reference: 9931370
A kit 70cc cast 100% complete, powerful and reliable for engine MINARELLI & YAMAHA Vertical air cooling.
Reference: 30420.M3
A super powerful and solid kit with a good quality for your boosters!
Reference: 166.0079
The excellent POLINI aluminum kit with W-shaped exhaust!
Reference: 76506.00
A high reliable, solid and efficient cast iron engine for your vertical minarelli motor scooter. Available in 10 or 12mm axle to choose from SPORT version.