• Banner

Kit 77cc Ø47,6mm PARMAKIT TP RACE special long race 43mm connecting rod 80mm minarelli vertical scooter (booster rocket, bws)
  • Kit 77cc Ø47,6mm PARMAKIT TP RACE special long race 43mm connecting rod 80mm minarelli vertical scooter (booster rocket, bws)

Kit 77cc Ø47,6mm PARMAKIT TP RACE special long race 43mm connecting rod 80mm minarelli vertical scooter (booster rocket, bws)

76590.00

A magnificent kit with bar exhaust and piston mono segment in Ø47,6mm, special long stroke 80mm rod (or 85mm with 5mm shim).

Stage 1 engine preparation
€224.99
Quantity
Shipping in 1-3 days

Description

The TP RACE version from PARMAKIT is a super cool high engine! With its diameter of 47.6mm, it does not require machining of the skirt foot (however beware, it is made for long strokes 43mm, so it is necessary to machine the housing to pass the crankshaft in all ways). It uses the same architecture as the Ø50mm racing version with slightly nicer diagrams. The piston is a graphite mono-segment to allow the highest revs, the cylinder head is mounted on O-ring and is studied for better cooling. This remains a very powerful kit to accompany a large carburation, a variable advance ignition, an exhaust for very powerful engine ... To be installed with a 43mm stroke crankshaft 12mm axle 80mm rod without wedge or 85mm rod with 5mm shim!

 

Optionally we offer you a stage 1 preparation, this preparation is a modification of the channels and the exhaust light by increasing the diagrams and improving the duct, it increases the performance of the cylinder. An improvement in the piston and bottom of the skirt is also included in this modification. Allow a little extra time for this preparation!

 

Mounts on MINARELLI VERTICAL engine :

 

APRILIA AMICO
APRILIA SR (before 1993 only)

FANTIC BIG WHEEL

GARELLI PONY
GARELLI SR

ITALJET BAZOOKA
ITALJET PISTA
ITALJET REPORTER
ITALJET SCOOP
ITALJET YANKEE
ITALJET ASCOT
ITALJET ASTRA

LEM FLASH
LEM GHIBLI
LEM TORNADO
LEM TORNADO SS1

KOTIR SR

KTM CHRONO

MBK BOOSTER
MBK BOOSTER NAKED
MBK BOOSTER ROCKET
MBK BOOSTER NEXT GENERATION (NG)
MBK BOOSTER CW
MBK BOOSTER SPIRIT
MBK STUNT
MBK TARGET
MBK BOOSTER TRACK

YAMAHA BW'S
YAMAHA BW'S NG
YAMAHA BW'S ORIGINAL
YAMAHA BW'S NAKED
YAMAHA CRZ
YAMAHA CT
YAMAHA SLIDER
YAMAHA SPY
YAMAHA ZUMA

 

And other models ...

Product Details
76590.00
1 Item
New product

Data sheet

Exhaust Diagram:
194° on 80mm connecting rod and 192° on 85mm connecting rod
Intake diagram (rear transfers):
133° on 80mm connecting rod and 131° on 85mm connecting rod
Nombre de segment
1 steel segment 1mm, cutting clearance 0.15mm
Model:
Minarelli vertical (Booster) air-cooled scooter, intake on cylinder
Lumière d'échappement
With bar
Thread length (mm):
19mm for long base candle
Diameter (Ø):
47.6mm
Intake diagram (lateral transfers):
135° on 80mm connecting rod and 133° on 85mm connecting rod
Matière
Nicasil treated aluminum
Recommended squish:
0.9mm
Cylindrée réelle
76.51cc on 43mm long stroke
Axis of:
Ø12mm
Nombre de transferts d'admission
6 transfers

Specific References

ean13
8056590226971
16 other products in the same category: