Reference: 9915030
Piston TOP PERFORMANCES Ø47mm bi-segment kit 70cc TOP PERF cast Peugeot horizontal air (ludix, speedfight 3, new vivacity ...)
Piston bi replacement segment for kit Ø47mm TOP PERFORMANCES cast and reaming coast.
Banner
Not approved on public roads, only reserved for competition, does not respect the highway code in any way!
Here is the 70cc TOP PERFORMANCES cast iron kit, this one is made with a good quality "MINACROM" treatment. It has 5 transfers. Its admission as well as its diagrams are reworked allowing it an excellent engine torque. The transfers and the exhaust are fine-tuned by hand in the Top performance factory.
The VERTEX Ø47mm piston with a high silicon content has a surface treatment with "Molybdenum disulphide" as well as a small preparation on the rear skirt and on the sides for better opening at PMB and better scanning. In addition, it is in two-segment 1.5mm thick, these are reinforced, hard chrome and curved which allows good acceleration.
Its cylinder head has a high compression chamber, tapered and smooth finish. It is one of the most resistant and torquey kits in its category thanks to its normal exhaust and the quality of its surface treatment. We recommend it to those who want very torquey equipment while having a certain solidity in order to do a lot of kilometers.
We recommend it with at least: reinforced crankshaft and bearings, racing D.19mm carburetion, racing exhaust, cold spark plug, perfect adjustment of the transmission and 100% synthetic racing oil.
Contains:
-Piston reinforced high silicon content with surface treatment with "Molybdenum disulphide"
-2 segments reinforced polished chrome 1.5mm thick
-G piston clips
-Complete pack reinforced joints
-Reinforced 12mm diameter piston pin
-Culasse d.47mm high polished truncated compression chamber
-Cylinder d.47mm cast iron, treated "MINACROM" (added chrome)
-Notice TOP PERFORMANCES
As an option we offer a stage 1 preparation, this preparation is a modification of the channels and the exhaust port by increasing the diagrams and improving the duct, it increases the performance of the cylinder. An improvement to the piston and the bottom of the skirt is also included in this modification. Allow a little extra time for this preparation!
Mounts on:
ludix blaster
ludix 2
ludix 2 trend
ludix 2 elegance
ludix elegance
ludix 2 one
ludix one
ludix snake
ludix snake furious
ludix 2 one two-seater
blaster ice blade
rs12 blaster
radical blaster
R cup blaster
jet forcejet c-tech
jet darkside
jet ice blade
speedfight 3 rs
speedfight 3
new vivacity
...
View of the prepared version:
Specific References
Reference: 9915030
Piston bi replacement segment for kit Ø47mm TOP PERFORMANCES cast and reaming coast.
Reference: 9910410
Quality segments Ø47 or Ø47,4mm for 70cc TOP PERFORMANCES cast iron kit.
Reference: 9927890
Ideal for a perfect refurbishment and without leakage, be careful to change your joints every time you disassemble and reassemble.
Reference: 3112901
The best of the 70cc air. A small 47mm that speaks loudly! Excellent torque / power / strength ratio .
Reference: 010251476
A low-cost and yet very efficient kit, in addition to being a very good preparation base with its booster exhaust, its 6 transfers and its mono-segment.
Reference: CIL-746
Kit without cylinder head to accompany the original cylinder head for new air-cooled PEUGEOT scooter engines.
Reference: 020251476
Here is the spare cylinder AIRSAL 010251476 kit. Ideal for those who want to keep the cylinder head of origin and make a saving.
Reference: EQ-746
Kit 70 with BARKIT cylinder head, very robust and torquey for a very low price, for PEUGEOT scooters with new air motorization!