Reference: S/47/3
Set of 2 segments Ø47 X 1,2mm for BARIKIT BARIKIT 70cc kit on scooter KYMCO Dink, dink Grand, Super9 ...
Ideal when tightening begins, heating ... for refurbishment!
Banner
Here is a complete 70cc kit with cylinder head from BARIKIT, in cast iron with its reinforced piston bi segments, it is really very solid but also more efficient than the origin thanks to diagrams revised upwards and especially its piston diameter increased to 47mm , which gives 70cc of actual displacement.
We recommend it to those who want to ride every day with a pot, a 19mm minimum carburetor and a small sport variator for example. It is designed to be fitted with the original cylinder head.
This type of cylinder can do a good 20,000 km by changing the piston to 10,000 km. The high compression cylinder head brings a boost in performance and torque! In addition to its robustness and its power to last over time, it is very well finished.
Contains :
-piston reinforced bi segment d.47 mm with side grease nipples
-2 reinforced segments Ø47mm
-2 piston clips (pin rings)
-full pack with reinforced seals
- piston pin diameter 12mm
-cylinder d.47mm racing cast iron
-class Ø47mm high compression
As an option we offer a stage 1 preparation, this preparation is a modification of the channels and the exhaust port by increasing the diagrams and improving the duct, it increases the performance of the cylinder. An improvement to the piston and the bottom of the skirt is also included in this modification. Allow a little extra time for this preparation!
Mounts on scooters and quads admission on the cylinder axis of 12mm :
KYMCO Sniper 50cc AC
KYMCO Heroism 50cc 2-stroke AC
KYMCO CALYPSO 50cc
KYMCO MAXXER 50cc (QUAD)
KYMCO MXER 50cc (QUAD)
KYMCO MXU 50cc (QUAD)
And many other models ...
Specific References
Reference: S/47/3
Ideal when tightening begins, heating ... for refurbishment!
Reference: CIL-756
Kit 70cc coupleux allowing a good gain of performances on your quads 50 KYMCO and scooters with admission on cylinder.
Reference: CUL-756
BARIKIT Ø47mm cylinder head for 70cc kits on KYMCO HEROISM, SNIPER, MXU, MXER 50 ...
Reference: P-477
Replacement piston for kits BARIKIT FONTE 70cc Ø47mm on scooters and quads KYMCO 50cc cooling by air or by liquid!
Reference: JUN-756
Full gasket set for 70cc kit KYMCO Heroism, MXU, MXER ... 50
Reference: 39120.00
A very good little 70cc scooter and quad KYMCO 50cc 2T!
Reference: CIL-756
Kit 70cc coupleux allowing a good gain of performances on your quads 50 KYMCO and scooters with admission on cylinder.
Reference: 31 8091
An excellent 70cc kit for KYMCO 50cc scooters and quads! To accompany your original cylinder head, torque and power in all solidity for your quads and scoots!