Reference: 075704
Ø47,6mm cylinder head for kit 70cc ATHENA sport (piece) on minarelli am6
Indispensable to style your 70cc Athena Ø47,6 mm engine mécaboite Minarelli AM6.
Banner
Not homologated on public roads, only reserved for competition, does not respect the highway code in any way!
A kit from the brand ATHENA , formerly very well known EUROCILINDRO renowned for the seniority, the quality of its treatments... A brand which is not known to everyone in France but which has a nice range of very high quality parts at relatively low prices. ATHENA has 2 kits for minarelli am6 in 70cc, this one is sport, in good quality aluminum with a very high-end nicasil chrome treatment, the finish is excellent.
The diagrams are also very good, this kit is wedged between torque and high revs, you will get both, moreover, it is very famous for doing a lot of kilometers for an aluminum, certainly even the strongest aluminum that have is seen on am6 in 70cc. Its piston is made of a domed hard chrome end single segment to allow the highest revs and avoid friction. The cylinder head has a polished tapered high compression chamber.
The gaskets are also of excellent quality, ATHENA is also a major manufacturer of gaskets and recognized throughout the world. The 47.6mm diameter will be an asset on an original race (39mm), it is closer to the so-called "square" engine than a large 50mm diameter which easily unbalances the engine movement. The exhaust is of a special anti-wear / improved sweeping shape. In conclusion, it is a very solid and efficient aluminum kit that can be used for everyday riding (outside France because it is not road approved), stunt riding, etc.
Aesthetically, it is relatively sober, it takes the original shape in a cleaner, beautiful metallic gray and it is marked ATHENA in 3D. We will also really appreciate the several joints of bases in order to refine his squish, moreover for beginners, the instructions explain how to make the squish and understand it.
We recommend it with at least: reinforced bearings, reinforced crankshaft, 19mm carburetor, racing exhaust, cold competition spark plug
Features :
Bore (Ø cylinder): 47.6mm
Displacement: 69.40cc in 39mm stroke (original)
Compression ratio: 13.9:1
The pack contains:
-cylinder 5 transfers normal exhaust in aluminum treated chrome of nicasil d.47,6mm
- high quality domed chrome end segment d.47.6mm
- reinforced mono segment piston d.47.6mm
-reinforced piston pin (original diameter)
-clips (axle rods) in C
-reinforced full seal pack
- wedge exhaust (euro 1 to 2)
- cylinder head bolts
-conical cylinder head d.47.6mm high compression polished chamber
-sticker
ATHENA booklet
- ATHENA assembly instructions in French/Spanish/Italian/English
As an option we offer you a stage 1 preparation, this preparation is a modification of the channels and the exhaust port by increasing the diagrams and improving the duct, it increases the performance of the cylinder. An improvement of the piston and the lower skirts is also included in this modification. Count a little extra time for this preparation!
Mounts on 50cc motorcycles with gearbox equipped with the minarelli am3, am4, am5, am6 euro 1, am6 euro 2 engine :
APRILIA RS 50cc am6 engine from 1997 to 2006 (warning news after 2006 in derbi euro 3 engine)
APRILIA RX am6 engine (warning news after 2006 in derbi euro 3 engine)
APRILIA MX am6 engine (warning news after 2006 in derbi euro 3 engine)
APRILIA TUONO 50cc am6 engine from 1997 to 2006 (warning news after 2006 in derbi euro 3 engine)
BETA RR
BETA RR ALU
BETA CRE
HONDA HM
HONDA CRE
HONDA BAJA
HUSQUVARNA WXE
HUSQUVARNA CH
HM DERAPAGE
HM CRE
MALAGUTI DRAKON
MALAGUTI XTM
MALAGUTI XSM
FANTIC CABALLERO
PEUGEOT XP6
PEUGEOT XPS
MOTORHISPANIA RYZ
PEUGEOT XPS
PEUGEOT XP STREET
PEUGEOT XP STREET EVO
PEUGEOT XR6
MOTORHISPANIA RX
PEUGEOT XR7
MOTORHISPANIA RX-R
RIAJU RS1
RIEJU RS2
RIEJU RS2 MATRIX
RIEJU RS2 MATRIX PRO
RIEJU SMX
RIEJU MRX
RIEJU SPIKE
KEEWAY TX EN
YAMAHA DT
MBK X-LIMIT
YAMAHA TZR
MBK X-POWER
SHE RC O SM
SHE RC O EN DURO
SHE RC O HRD
SHE RC O EN DURO
And many other machines!
Reference: 075704
Indispensable to style your 70cc Athena Ø47,6 mm engine mécaboite Minarelli AM6.
Reference: S4C04760005A
Complete quality piston for the maintenance of your Athena 70cc high engine kit.
Reference: 080016/R
High quality segment for various 70cc high engine kit.
Reference: S410000304007
Set of 2 clips of type C plus its axis diameter 12 by length 37 mm. Essential for a refurbishment of quality!
Reference: 075703/1
A complete seal pack for a 100% waterproof assembly. To change with each reassembly. In addition to this, you need to know more about it.
Reference: M752603112094
A viton seal, reinforced for your exhaust minarelli am6 (euro 1 big diameter 28mm).
Reference: M752610370004
High quality gasket for a perfect seal of your high engine.
Reference: S410000304002
The ATHENA clips of good quality for 12mm axles with 1mm diameter piston groove!
Reference: 3112609
The famous MHR 80cc AM6 diameter 50mm, and standard stroke original size of transfers certainly ... But what power! What a couple and what strength !! One of the best normal market race!
Reference: KT00114
Powerful, solid, inexpensive, ideal for starting a good little configuration on the am6 engine. Identical to TOP BLACK, also manufactured at MOTORPARTS!
Reference: EQ-921-S
Top BARIKIT aluminum engine with 5 transfers, piston mono segment, exhaust with bar and incoming high compression cylinder head. Guaranteed performance!
Reference: EQ-1034-S
The famous 50mm (80cc) aluminum BARIKIT BRK Racing with high compression cylinder head with bi-part stud! A very powerful cylinder with 5 transfers worked, big exhaust with bar, piston mono segment ....
Reference: EQ-715
The famous 7 Ø47mm cast iron transfers with oval exhaust for minarelli am6 engine, Sport 1 version with single monoblock cylinder head in frustoconical shape, thicker segmentation ....
Reference: EQ-1033-S
The famous 50mm (80cc) aluminum BARIKIT BRK Racing with high compression cylinder head incoming combustion chamber! A very powerful cylinder with 5 transfers worked, big exhaust with bar, piston mono segment ....
Reference: 9921150
The famous TOP ROSE racing version, it is different from the normal cylinder head stud (2 parts) to improve cooling! An excellent cylinder whose reputation is second to none!
Reference: CK.44.780.GR2
The direct competitor of MALOSSI MHR TEAM cylinder with its 308-3 GILARDONI (Special skirt exhaust has boosters, 6 transfers), the cylinder head has stud, its very well defined diagrams ... For am6!
Reference: EQ-987-S
A large diameter 50mm durable aluminum with 5 transfers and exhaust with bar, incoming high compression type of cylinder head. 50cc motorcycle equipped with the engine minarelli am6. Assured performance!
Reference: 075700
The ATHENA sport is certainly the best aluminum for a small budget, of very high quality, it is solid and very efficient! A perfect torque / power ratio.
Reference: 01135850
A large 50mm diameter aluminum at low prices! This AIRSAL 80cc offers a lot of torque to the minarelli am6 engine!
Reference: P400130100005
A kit that allows you to have torque at all speeds.
Reference: CK.44.748.G1
GILARDONI cylinder 308 (oval exhaust) resistant aluminum with 6 transfers, VERTEX two segments piston, oval exhaust and improved cylinder head high compression mono block. A concentrate of performances.
Reference: 3112228
A ratio power / torque / unbeatable strength !!!
Reference: 01133348
Stronger and torquey than the 48mm standard, made in spain, this AIRSAL also has better piston! Ideal for riding every day in a country or are allowed big kits!
Reference: CK.44.748.GR1
GILARDONI cylinder 308 (oval exhaust) resistant aluminum with 6 transfers, VERTEX piston mono-segment, oval exhaust and improved cylinder head high compression mono block. A concentrate of performances.