Reference: 06085950
Ø50mm AIRSAL piston for 80cc AIRSAL Luxe kit on mécaboite driving DERBI EURO 3 & 4
Replacement piston for your Airsal 80cc kit! To change every 5000km approximately.
Banner
Here is a kit known by all those in the field! Both taken as an example for the preparers and used by the less connoisseurs who drive every day… This AIRSAL is certainly the best quality / price ratio on the market! This luxury model has a two-segment VERTEX piston modified by AIRSAL. It is more torquey and solid than the single-segment model that we also offer at a lower price.
It is taken as a basis by many preparers because its channels, its distribution, its bar exhaust are really big assets! Its finish is excellent, its diagrams have a good torque / power ratio. In relation to the AIRSAL for DERBI euro ½, this AIRSAL for DERBI euro 3 and 4 has large intake diagrams and a special form of transfers, you will need to align the crankcases at best to this cylinder.
You can accompany it with a small or large configuration, you can use it for stunt, race, ride every day…. Clearly this kit is really suitable for any type of activity. It is clear that we are far from the quality and performance of BIDALOT, MHR, BIDALOT… the cylinder head is a high compression inlet chamber model with a polished finish. A small alignment could be welcome (cylinder / crankcases) but it is in no way obligatory for the proper functioning of this high engine.
We recommend this kit with at least : reinforced crankshaft and bearings, minimum 21mm carburetion, racing exhaust, cold racing spark plug, reinforced clutch ...
The pack contains :
X2 segments d.50mmX1mm including a domed chrome for the top of the piston
X1 VERTEX / AIRSAL bi-segment piston
X1 complete seal pack
X1 piston pin
X2 piston clips
X1 high compression cylinder head incoming stud
X1 notice
X1 exhaust / cylinder head bolts kit
As an option we offer a stage 1 preparation, this preparation is a modification of the channels and the exhaust port by increasing the diagrams and improving the duct, it increases the performance of the cylinder. An improvement to the piston and the bottom of the skirt is also included in this modification. Allow a little extra time for this preparation!
Reference: 06085950
Replacement piston for your Airsal 80cc kit! To change every 5000km approximately.
Reference: 14085950 - 14084350
Ideal in case of disassembly / reassembly of your high engine.
Reference: 04085950
A single high compression cylinder head for the 80cc aluminum AIRSAL kit in Ø50mm. Ideal in the event of breakage, crack or just heat which will make that the cylinder head will not be flat any more thus a premature wear of the gaskets.
Reference: H01089347
A kit a little more powerful than the original while maintaining excellent reliability for a totally ridiculous price.
Reference: 23170.00
A huge cylinder! At the height of TEAM MHR. Exhaust boosters, large diameter 50mm, single segment, aluminum ...
Reference: 11000088
A reliable and efficient 70cc kit for derbi Euro 3 and 4!
Reference: P400105100007
A high performance high-performance engine, diameter 50mm, 80cc, complete ...
Reference: EQ-780
The famous large diameter in cast iron from BARIKIT for DERBI Euro 3 and 4 motorbikes. An excellent quality / price ratio with stud cylinder head, 5 transfers, booster exhaust ....
Reference: EQ-976-S
The racing version of the 75cc Ø48mm BARIKIT. Mono-segment with stud cylinder head.
Reference: 109.0016
One of the rare competitors to match the TEAM MHR, this POLINI EVOLUTION offers a lot of torque and power, to be accompanied by a good configuration!
Reference: CI.12.786.G
High-end aluminum cylinder with 6 transfers, single-segment VERTEX piston, large booster exhaust. A real concentrate of performance.
Reference: 23172.00
The biggest high engine kit for DERBI Euro 3 and 4 !!! Ø55mm, in 40mm stroke so like the origin! A real couple monster.
Reference: 010810050
The all new kit from AIRSAL which develops 20 hp minimum!
Reference: EQ-990-S
The racing version of the 80cc Ø50mm BARIKIT. Mono-segment with stud cylinder head.
Reference: EQ-1031-S
The racing version of the 80cc Ø50mm BARIKIT BRK. Mono-segment.
Reference: 11000887
One of the most efficient high engine kit for DERBI Euro 3 and 4 !!! Ø50.5mm, in stroke 44.9mm therefore like the origin! A real couple monster.
Reference: EQ-957-S
The racing version of the 80cc Ø50mm BARIKIT. Bi-segments with stud cylinder head.
Reference: EQ-1032-S
The racing version of the 80cc Ø50mm BARIKIT BRK. Mono-segment with stud cylinder head.
Reference: 3112988
The famous MHR TEAM 80cc for Derbi Euro 3 and 4, standard race and original size transfers of course ... But what power! What a couple and what solidity !! One of the best normal races on the market!