- -8%
Reference: 6611785B
Needle cage reinforced MALOSSI Ø12X17X16mm minarelli am6, DERBI, PIAGGIO, scooters ...
High quality needle cage, reinforced! ideal on the most advanced configurations.
Banner
Unapproved, banned on public roads for competition and closed circuits!
This kit 70cc MALOSSI MHR is a concentrate of performance thanks to its design, study, architecture and elements that accompanies it. Its aluminum cylinder nikasil treated with specific heat treatment, has excellent finishes and has 6 admission transfers widened and worked with a huge exhaust with bar.
The piston is a single high-quality segment model Ø47,6mm diameter promoting high speeds (reducing friction), equipped with its end segment chrome domed honed, clips reinforced C and its axis 12mm. The piston was created from the finest materials to ensure good heat resistance and temperature changes with an outer coating of graphite to an even lower coefficient of friction.
Finally, a single-piece aluminum cylinder head, it bonds with the stud nut mounted O-ring for a perfect seal. Its combustion chamber is a high compression with ever finish of high quality. Equipped with the terminals for anti freeze and coolant connection.
Delivered 100% complete as shown with gasket set for the squish, studs, accessories, fasteners, valves strips, piston mono segment, monobloc cylinder head ....
We recommend to accompany this high engine with at least: Ø21mm carburizing, an intake kit, racing exhaust, ultra vilbebrequin reinforced, reinforced bearings C4 or Celeron, cold candle racing, motor oil 100% synthetic racing, a variation great beach, a racing ignition, careful monitoring and running, mounting in the rules ....
Optional we offer a preparation course 1, this preparation is a modification of the exhaust port by increasing the charts and improvement of the duct, it increases the cylinder performance. Improved bottom skirt is also included in the amendment. Allow a little extra time for this preparation!
Itself on:
Engine 2 Time minarelli horizontal liquid scooter
2 motor scooter minarelli horizontal air Time Spent liquid (long only)
APRILIA AREA 51 LC
APRILIA GULLIVER 50
Aprilia SR 50 LC NETSCAPER
APRILIA RALLY 50 LC
RACING APRILIA SR 50 LC
APRILIA SONIC LC
APRILIA SR REPLICA LC
APRILIA SR STEALTH
BENELLI 491 SPORT LC
BENELLI K2 50 LC
BETA ARK 50 LC
BETA EIKON 50 LC
GSP GARELLI 50 LC
ITALJET DREAGSTER 50 LC
MALAGUTI F15 FIREFOX 50 LC
MALAGUTI F12 DIGIT KAT LC
MALAGUTI F12 LC Phatom
MALAGUTI F12 R LC
MBK MACH G 50 LC
MBK NITRO 50 LC
YAMAHA AEROX 50 LC
YAMAHA JogRR 50 LC
Reference: 6611785B
High quality needle cage, reinforced! ideal on the most advanced configurations.
Reference: 27 7054.K0
Ideal for fine-tuning your settings and improving your performance!
Reference: 36 4450
Do not forget to change at each winding to prevent engine failure thereafter.
Reference: 1012877
Ideal for plugging carburettor air intakes or cylinder head.
Reference: 11 8287C
Pack a few seals available !!!
Reference: 34 8654.A0
A spare piston high-end treatment with graphite, several sizes available!
Reference: 19 3298E
Set of 2 M6 studs which can be used for many applications.
Reference: 2311783B
Piston pin with shaped clips "C", essential for refurbishment quality and reliable.
Reference: 06 8187
Pack a few seals available !!!
Reference: 38 8467
Ideal replacement cylinder head in case of wear, breakage ... of your old part!
Reference: 31 8459
For more performance and a solid engine! This 70cc kit will be very good for equipping your scooter with a low horizontal Minarelli / Yamaha engine.