- -8%
Reference: 6611785B
Needle cage reinforced MALOSSI Ø12X17X16mm minarelli am6, DERBI, PIAGGIO, scooters ...
High quality needle cage, reinforced! ideal on the most advanced configurations.
Banner
Not approved, prohibited on public roads, reserved for competition and closed circuits!
This 70cc MALOSSI MHR kit is a real concentrate of performance thanks to its design, its study, its architecture and the elements that accompany it. Its nicasil treated aluminum cylinder with specific heat treatment, has an excellent finish and is equipped with 6 enlarged and worked intake transfers with a huge bar exhaust.
The piston is a high quality single segment model in diameter Ø47.6mm favoring high speeds (reduction of friction), equipped with its fine convex lapped chrome segment, reinforced C clips and its 12mm axle. The piston has been created from the best materials to guarantee good resistance to heat and temperature changes with an external graphite coating for an even lower coefficient of friction.
Delivered 100% complete as presented with set of joints to make the squish, studs, accessories, screws, valve slats, single segment piston...
Cylinder head not supplied, available alone or with included in the kit (see in the spare parts at the bottom of the description).
We recommend accompanying this high engine with at least: Ø21mm carburetion, an intake kit, a racing exhaust, an ultra-reinforced crankshaft, C4 or Celeron reinforced bearings, racing cold spark plug, 100% synthetic racing engine oil, a variation large range, racing ignition, careful and follow-up running-in, proper assembly, etc.
As an option we offer a stage 1 preparation, this preparation is a modification of the exhaust port by increasing the diagrams and improving the duct, it increases the performance of the cylinder. An improvement to the bottom of the skirt is also included in this modification. Allow a little extra time for this preparation!
Mounts on:
2-stroke scooter minarelli horizontal liquid engine
2-stroke scooter minarelli horizontal engine air passed into liquid (long only)
APRILIA AREA 51 LC
APRILIA GULLIVER 50
APRILIA SR NETSCAPER 50 LC
APRILIA RALLY 50 LC
APRILIA SR RACING 50 LC
APRILIA SONIC LC
APRILIA SR REPLICA LC
APRILIA SR STEALTH
BENELLI 491 SPORT LC
BENELLI K2 50 LC
BETA ARK 50 LC
BETA EIKON 50 LC
GARELLI GSP 50 LC
ITALJET DREAGSTER 50 LC
MALAGUTI F15 FIREFOX 50 LC
MALAGUTI F12 DIGIT KAT LC
MALAGUTI F12 PHATOM LC
MALAGUTI F12 R LC
MBK MACH G 50 LC
MBK NITRO 50 LC
YAMAHA AEROX 50 LC
YAMAHA JOGRR 50 LC
Reference: 6611785B
High quality needle cage, reinforced! ideal on the most advanced configurations.
Reference: 27 7054.K0
Ideal for fine-tuning your settings and improving your performance!
Reference: 36 4450
Do not forget to change at each winding to prevent engine failure thereafter.
Reference: 1012877
Ideal for plugging carburettor air intakes or cylinder head.
Reference: 11 8287C
Pack a few seals available !!!
Reference: 34 8654.A0
A spare piston high-end treatment with graphite, several sizes available!
Reference: 19 3298E
Set of 2 M6 studs which can be used for many applications.
Reference: 2311783B
Piston pin with shaped clips "C", essential for refurbishment quality and reliable.
Reference: 31 8460
For more performance and a strong engine! This 70cc will be very good to equip your scooter with low Minarelli / Yamaha engine horizontal.
Reference: 06 8187
Pack a few seals available !!!
Reference: 38 8467
Ideal replacement cylinder head in case of wear, breakage ... of your old part!