• Banner

  • -8%
Kit 70cc Ø47,6mm without cylinder head MALOSSI MHR aluminum (axis of 12mm) minarelli horizontal liquid (nitro, aerox, ...)
  • Kit 70cc Ø47,6mm without cylinder head MALOSSI MHR aluminum (axis of 12mm) minarelli horizontal liquid (nitro, aerox, ...)

Kit 70cc Ø47.6mm without MALOSSI MHR aluminum cylinder head (12mm axle) minarelli horizontal liquid (nitro, aerox, ...)

31 8459

For more performance and a solid engine! This 70cc kit will be very good for equipping your scooter with a low horizontal Minarelli / Yamaha engine.

Engine preparation
€216.66
€199.33
local_offer Save 8%
Quantity
Please note, may require a delay of more than 20 days

Description

Not approved, prohibited on public roads, reserved for competition and closed circuits!

This 70cc MALOSSI MHR kit is a real concentrate of performance thanks to its design, its study, its architecture and the elements that accompany it. Its nicasil treated aluminum cylinder with specific heat treatment, has an excellent finish and is equipped with 6 enlarged and worked intake transfers with a huge bar exhaust.



The piston is a high quality single segment model in diameter Ø47.6mm favoring high speeds (reduction of friction), equipped with its fine convex lapped chrome segment, reinforced C clips and its 12mm axle. The piston has been created from the best materials to guarantee good resistance to heat and temperature changes with an external graphite coating for an even lower coefficient of friction.


Delivered 100% complete as presented with set of joints to make the squish, studs, accessories, screws, valve slats, single segment piston...

Cylinder head not supplied, available alone or with included in the kit (see in the spare parts at the bottom of the description).


We recommend accompanying this high engine with at least: Ø21mm carburetion, an intake kit, a racing exhaust, an ultra-reinforced crankshaft, C4 or Celeron reinforced bearings, racing cold spark plug, 100% synthetic racing engine oil, a variation large range, racing ignition, careful and follow-up running-in, proper assembly, etc.

As an option we offer a stage 1 preparation, this preparation is a modification of the exhaust port by increasing the diagrams and improving the duct, it increases the performance of the cylinder. An improvement to the bottom of the skirt is also included in this modification. Allow a little extra time for this preparation!

Mounts on:

2-stroke scooter minarelli horizontal liquid engine
2-stroke scooter minarelli horizontal engine air passed into liquid (long only)

APRILIA AREA 51 LC
APRILIA GULLIVER 50
APRILIA SR NETSCAPER 50 LC
APRILIA RALLY 50 LC
APRILIA SR RACING 50 LC
APRILIA SONIC LC
APRILIA SR REPLICA LC
APRILIA SR STEALTH

BENELLI 491 SPORT LC
BENELLI K2 50 LC

BETA ARK 50 LC


BETA EIKON 50 LC

GARELLI GSP 50 LC

ITALJET DREAGSTER 50 LC

MALAGUTI F15 FIREFOX 50 LC
MALAGUTI F12 DIGIT KAT LC
MALAGUTI F12 PHATOM LC
MALAGUTI F12 R LC

MBK MACH G 50 LC
MBK NITRO 50 LC


YAMAHA AEROX 50 LC

YAMAHA JOGRR 50 LC

Product Details
You might also like