- -8%
Reference: 34 7849
Piston bi segment Ø47mm axis 12mm for kit MHR and MHR Replica 70cc vertical minarelli, minarelli am6 ...
Ideal in the event of compression losses, to be changed every 8,000 km!
Banner
A very good kit from malossi which combines performance and solidity. Its 47mm diameter offers 68cc. The cylinder is made of top-of-the-range cast iron bored using CS machines, the transfer ducts are specially designed to obtain maximum performance. The diagrams are based between the peak and the torque, we won't recommend it for extreme power, that's for sure, but for stunt driving every day (outside France because it's not approved) it's excellent, its aluminum cylinder head allows very good cooling and is obviously in a high compression chamber.
It comes with special reinforced seals, carbon valve slats studied on the cylinder, a piston with side grease nipples in special alloy reinforced in bi segment. We will have appreciated that it is very complete with its valves, its booklet... and its special training. You can do a good 25,000 km with this type of kit by changing the piston every 8,000 to 10,000 km. In case of tightening, you just have to rebore it, it costs less than buying a kit and can still increase the performance of the kit.
We recommend fitting at least with this kit: racing exhaust, cold racing spark plug, 17.5mm carburetor, reinforced bearings and crankshaft.
MALOSSI description:
CAST IRON THERMAL UNITS D. 47
Cast iron thermal units D. 47: the maximum balance between performance and duration of the components. Designed and developed with the specific objective of obtaining a thermal unit capable of guaranteeing high reliability as well as the improvement of the internal thermo and fluido-dynamic systems. The Malossi technicians, thanks to the experience in the preparation of the engines for the competition, brought to the maximum levels the thermo-dynamics of the thermal groups in cast iron and they took care of the internal fluido-dynamics of the thermal group (see the transfer ducts, exhaust and combustion chamber) obtaining a high turbulence in the combustion chamber, which has allowed to reduce in a consistent way both the specific consumptions and the exhaust pollution.
Features
Material: wear-resistant lamellar special cast iron
Recalculated heat exchange surfaces
Machining with CNC machine tools
Openings and exhaust studied for maximum performance
Pistons in special aluminum alloy with high silicon content, lightened and reinforced
Segments in special cast iron with automatic lubrication
Optimized compression ratio
Very high turbulence combustion chamber
The pack contains:
-piston d.47mm reinforced bi segment
- MALOSSI carbon valves
-X2 hard chrome reinforced segments
- treated reinforced piston pin
-reinforced piston clips in G
- cylinder minacrom cast iron 6 transfers normal exhaust
-complete seal pack
- hose + 2 hose clips
- cylinder head d.47mm micro-blasted high compression chamber
-notice in booklet
-sticker
As an option, we offer you a stage 1 preparation, this preparation is a modification of the exhaust port by increasing the diagrams and improving the duct, it increases the performance of the cylinder. An improvement to the bottom of the skirt is also included in this modification. Count a little extra time for this preparation!
Mounts on :
2-stroke horizontal liquid scooter minarelli engine
2-stroke engine scooter minarelli horizontal air passed in liquid (long only)
APRILIA AREA 51 LC
APRILIA GULLIVER 50
APRILIA SR NETSCAPER 50 LC
APRILIA RALLY 50LC
APRILIA SR RACING 50 LC
APRILIA SONIC LC
APRILIA SR REPLICA LC
APRILIA SR STEALTH
BENELLI 491 SPORT LC
BENELLI K2 50LC
BETA ARK 50 LC
BETA EIKON 50 LC
GARELLI GSP 50 LC
ITALJET DREAMSTER 50 LC
MALAGUTI F15 FIREFOX 50 LC
MALAGUTI F12 DIGIT KAT LC
MALAGUTI F12 PHATOM LC
MALAGUTI F12 R LC
MBK MACH G 50 LC
MBK NITRO 50LC
YAMAHA AEROX 50LC
YAMAHA JOGRR 50LC
Reference: 34 7849
Ideal in the event of compression losses, to be changed every 8,000 km!
Reference: 34 6172
Replacement piston for your MALOSSI 70cc cast iron kits!
Reference: 27 7054.K0
Ideal for fine-tuning your settings and improving your performance!
Reference: 3612541
Do not forget to change with each reassembly for maximum strength.
Reference: 36 6941
Ideal for the refurbishment of your engine!
Reference: 1012877
Ideal for plugging carburettor air intakes or cylinder head.
Reference: 11 8287C
Pack a few seals available !!!
Reference: 38 8186
Spare cylinder head MALOSSI MHR for Replica 70cc in diameter 47mm.
Reference: 06 8187
Pack a few seals available !!!
Reference: 9931310
A kit that offers very good torque, good speed but also a lot of strength! In addition to this, you need to know more about it.
Reference: 072400
A wonderful kit that announces high performance while maintaining high strength.
Reference: 9929340
The top in case of clamping, kit TOP PERFORMANCES for normal running vilebrequin 39.2 on liquid horizontal minarelli (scooter nitro, aerox and many others).
Reference: 30.431/M3
A high-performance engine, powerful and very solid in SIMONINI. A real monster with 6 transfers of admission, exhaust and boost VERTEX piston mono segment.
Reference: KT00109
A kit that offers torque, speed but also a lot of solidity!
Reference: 31 8459
For more performance and a solid engine! This 70cc kit will be very good for equipping your scooter with a low horizontal Minarelli / Yamaha engine.
Reference: 3113262
A very good compromise between strength and power!
Reference: 166.0083/R
Very efficient and solid, the famous POLINI CORSA hand retouched at POLINI!
Reference: EQ-707
A perfect kit to ride every day and over long distances without being afraid of heating or primer.
Reference: 081100
A kit with even further diagrams for a bigger performance boost on your scooter liquid.
Reference: H01073947
A kit much stronger than the aluminum AIRSAL and very torquey. A perfect kit to ride every day and over long distance without fear of a heater or primer.
Reference: 010726476
A very good price / quality, performance and torque! Luxury model.
Reference: 166.0110
The excellent BIG evo for crankshaft normal stroke 39.2mm with long rod 85mm.
Reference: 01073450
A high ultra racing engine, very powerful all this at a price never seen for such quality.
Reference: 3115390
Replacing the famous MALOSSI MHR TEAM!
Reference: P400485100044
The must of all ATHENA kits with a bolted cylinder head for better gas explosion and better engine cooling.