Reference: CUL-995
Yoke complete pad Ø47mm for kit 70cc BARIKIT aluminum pad on scooter minarelli horizontal liquid (nitro, aerox ...)
The ideal replacement cylinder head if cracked, sheer ...
Banner
Not approved on the public highway, only for competition on the track, run .... Respects by no means the rules of the road!
Here the Ø47mm aluminum cylinder largest Spanish manufacturer BARIKIT, this version is the most powerful version below the factory prepared series of BRK series (BRK BARIKIT RACING). The finishing cylinder is very clean and the treatment nykasil good quality! Admission level BARIKIT remained simple with a 5 transfers like the MHR Team and many other cylinders, lateral transfers before are designed to go under the exhaust, the base is also well worked to deliver performance and better scanning . The exhaust is a very wide array model. The diagrams are very high, to speak this kit so we recommend a good carb and good racing exhaust with large volumes. This racing version is therefore equipped with the famous decomposable cylinder head (con culatin / stud bolt), the head offers better cooling and thus obviously additional performance, the pad is a template for entering preserve centered combustion chamber. The combustion chamber is a high compression truncated version we regret finish this level not high enough, no polishing room, enough low-end aluminum. Apart from this, BARIKIT being one of the largest piston manufacturer, quality is present, the piston mono segment is also very good work and excellent quality to ensure high speeds. We regret the absence of a preparation on the rear piston to optimize the sweep. In conclusion, this is a very good kit, excellent quality / price, performance is well above appointment has high speed is the maximum power that is not referred the couple. We appreciate that the kit is supplied with 4 joints of base plate to make the squish.
Optional we offer a preparation course 1, this preparation is a modification of the channels and the exhaust port by increasing the charts and improvement of the duct, it increases the cylinder performance. An improvement of the piston skirt and stockings is also included in this change. Allow a little extra time for this preparation!
Itself on:
Engine 2 Time minarelli horizontal liquid scooter
Engine 2 scooter minarelli horizontal air Time Spent liquid (long only)
APRILIA AREA 51 LC
APRILIA GULLIVER 50
NETSCAPER APRILIA SR 50 LC
APRILIA RALLY 50 LC
RACING APRILIA SR 50 LC
APRILIA SONIC LC
APRILIA SR REPLICA LC
APRILIA SR STEALTH
BENELLI 491 SPORT LC
BENELLI K2 50 LC
BETA ARK 50 LC
BETA EIKON 50 LC
GARELLI GSP 50 LC
ITALJET DREAGSTER 50 LC
MALAGUTI F15 FIREFOX 50 LC
MALAGUTI F12 DIGIT KAT LC
MALAGUTI F12 Phatom LC
MALAGUTI F12 R LC
MBK MACH G 50 LC
MBK NITRO 50 LC
YAMAHA AEROX 50 LC
YAMAHA JogRR 50 LC
Reference: CUL-995
The ideal replacement cylinder head if cracked, sheer ...
Reference: EQ-785
High performance version from BARIKIT, recognizable by its white cylinder head.
Reference: P400485100044
The must of all ATHENA kits with a bolted cylinder head for better gas explosion and better engine cooling.
Reference: 31 8430
A very good compromise between strength and power!
Reference: 01073450
A high ultra racing engine, very powerful all this at a price never seen for such quality.
Reference: 010726476
A very good price / quality, performance and torque! Luxury model.
Reference: 31 8460
For more performance and a strong engine! This 70cc will be very good to equip your scooter with low Minarelli / Yamaha engine horizontal.
Reference: 166.0083
Ideal to increase the performance of your scooter engine drastically!
Reference: 30.431/M3
A high-performance engine, powerful and very solid in SIMONINI. A real monster with 6 transfers of admission, exhaust and boost VERTEX piston mono segment.
Reference: 072400
A wonderful kit that announces high performance while maintaining high strength.
Reference: 3113036
The original must race kit market. Out of production!
Reference: 010713476
The cheapest aluminum cylinders, made in spain, AIRSAL is good and offers good performance at a reduced price.
Reference: 3112642.T0
Kit MALOSSI MHR TEAM 2 Factory Ø47.6mm axis Ø13mm for minarelli horizontal liquid (nitro, aerox, ...)
Reference: 9921160
The famous TOP PERFORMANCES ROSE with top of the range cylinder head with stud (two parts) diameter 47mm solid and powerful.
Reference: 9912800
The famous TOP PERFORMANCES ROSE diameter 47mm solid and efficient.
Reference: 9929340
The top in case of clamping, kit TOP PERFORMANCES for normal running vilebrequin 39.2 on liquid horizontal minarelli (scooter nitro, aerox and many others).
Reference: 166.0113/10
Very high-end kit! The EVOLUTION 3 is one of the best!