• Banner

kit 70cc Ø47,6mm BIDALOT Racing Replica aluminum (12mm axis) minarelli horizontal liquid (nitro, aerox, ...)
  • kit 70cc Ø47,6mm BIDALOT Racing Replica aluminum (12mm axis) minarelli horizontal liquid (nitro, aerox, ...)

§kit 70cc Ø47,6mm BIDALOT Racing Replica aluminum (12mm axis) minarelli horizontal liquid (nitro, aerox, ...)

11000733

Ideal for mounting a large engine configuration on your NITRO & AEROX.

Engine preparation
Quantity

Description

Attention, prohibited on the road, only reserved for competition.

Available in 12mm axle only. Here is the BIDALOT racing replica kit for liquid horizontal minarelli, although it bears the name of replica, it is a real competition kit! This cylinder has a real competition architecture very worked, we can notice to start an ultra increased base and well drawn, you will have to align your casings for good performances.



We also notice the rear sides that really pull and the rear transfers, 2 in number. Unlike some cylinders like the MALOSSI MHR TEAM, this cylinder does not require boring the housings at the skirt feet for its passage... stock horizontal minarelli crankcases (mbk nitro, Yamaha aerox, malaguti f12…).



The aluminum is very top of the range, the nicasil is also one of the best on the market. The finish is really excellent, this cylinder has very high diagrams and a large bar exhaust… It will therefore require an exhaust, carburetion and ignition to match! And above all a well-reinforced crankshaft and bearings.



The cylinder head is in 2 parts to offer ease of changing the studs but above all to improve cooling. the pedestal has a tapered chamber with a polished finish. The piston is a top-of-the-range model with a high silicon content, it is equipped with a mono segment end hard chrome domed not to limit the high speeds!



This cylinder is clearly a real monster, it offers a very good torque but above all a very high power... Like what, you should certainly not trust its nice replica name. It is referenced under the number 11000733.



Its differences with the real pro competition reference 11000833 are: The piston which is not forged but a simple casting, the base gasket which here on the replica is alone, the pro competition has several base gaskets to do well the squish and even a racing spark plug or a special 85mm elongated connecting rod wedge delivered with it, the cylinder is obviously less worked on this replica version, even the cylinder head cover and other tricks are also different.



We recommend accompanying this kit with at least : 21mm carburetor, reinforced crankshaft (39.2mm stroke and 80.00 connecting rod of original size but connecting rod small end cage in Ø12mm against 10mm for the origin), reinforced bearings, ignition holding the towers (original minimum improved with box), racing exhaust, cold racing spark plug…



The pack contains :

X1 cylinder 6 transfers exhaust with aluminum bar / nicasil d.47,6mm

X1 polished conical high compression chamber cylinder head stud

X1 cylinder head cover

X1 piston d.47.6mm cast mono-segment racing*

X1 conical piston pin Ø12mm

X1 pre-ground domed hard chrome segment d.47.6mm X 0.80mm

X2 piston clips in C Ø12 X 1mm

X1 full seal pack

X1 manual

X1 racing cylinder head nut set

X1 set of BIDALOT stickers



Technical characteristics

• Cylinder with 6 transfers and exhaust bar in light alloy treated for high thermal stability with Nikasil coating, Ø 47.6 mm

• Racing Cast Piston, fitted with a chrome-plated cast iron segment, rounded domed, Ø 47.6 mm

• Cylinder head in high compression light alloy, sealing by Viton O-ring, thread for long-base spark plug

• Light alloy cylinder head cover, sealing by O-rings.

Piston/cylinder clearance: 0.07 to 0.08 recommended

Play at segment cut: 0.20mm imperative!!!





As an option, we offer you a stage 1 preparation, this preparation is a modification of the exhaust port by increasing the diagrams and improving the duct, it increases the performance of the cylinder. An improvement to the bottom of the skirt is also included in this modification. Count a little extra time for this preparation!

Mounts on :

2-stroke horizontal liquid scooter minarelli engine
2-stroke engine scooter minarelli horizontal air passed in liquid (long only)

APRILIA AREA 51 LC
APRILIA GULLIVER 50
APRILIA SR NETSCAPER 50 LC
APRILIA RALLY 50LC
APRILIA SR RACING 50 LC
APRILIA SONIC LC
APRILIA SR REPLICA LC
APRILIA SR STEALTH

BENELLI 491 SPORT LC
BENELLI K2 50LC

BETA ARK 50 LC
BETA EIKON 50 LC

GARELLI GSP 50 LC

ITALJET DREAMSTER 50 LC

MALAGUTI F15 FIREFOX 50 LC
MALAGUTI F12 DIGIT KAT LC
MALAGUTI F12 PHATOM LC
MALAGUTI F12 R LC

MBK MACH G 50 LC
MBK NITRO 50LC

YAMAHA AEROX 50LC
YAMAHA JOGRR 50LC

Product Details
11000733
New product
You might also like
16 other products in the same category: