Reference: 6611785B
Needle cage reinforced MALOSSI Ø12X17X16mm minarelli am6, DERBI, PIAGGIO, scooters ...
High quality needle cage, reinforced! ideal on the most advanced configurations.
Banner
Not homologated, reserved for competition and closed circuits!
The kit MALOSSI MHR CROSS 70cc is a kit based on the very high performance and maximum strength. This kit has a Ø47,6mm bore and is made of aluminum treated nikasil, this nikasil coming out of MALOSSI is one of the best on the market ... The quality of aluminum Malossi is more to prove.
Designed to be basic for the 70cc track and trophy, it is very torquey and stunt lovers will be thrilled. MALOSSI to solidify this kit has installed a piston model luxury bi-segments with side grease and light at the back to improve scanning, with 2 segments
The cylinder has an intake 6 transfers modified and completely overhauled, a large exhaust extended booster, diagrams very high and sharp, the bore is perfect and worthy of the largest cylinder! Clearly, this kit is a small monster of torque that does not neglect high diets, it is very powerful but also does not neglect the strength, its finish and study are very advanced.
We recommend it to ride every day (except France), for the competition that requires solid motors, the stunt, ... It is obviously delivered complete with a 12mm reinforced needle cage and other mounting accessories.
We recommend to accompany this kit at least : racing exhaust adapted, full kit carburation Ø21mm, reinforced bearings kit game C3 or C4, reinforced crankshaft, cold racing candle, ...
This pack contains:
Aluminum cylinder Ø47,6mm nikasil
Single-piston piston
X1 hard chrome plated segments Ø47,6mm
Piston pin Ø12mm
Piston clips in C
High compression cylinder head Ø47,6mm
Reinforced needle cage
Complete seal pack
stickers
Explanatory note (booklet)
Attention, the MALOSSI skirt is larger than the original one, so you will need to resize the casings at the time of installation so that the skirt can fit into the original casings.
Optionally we offer a stage 1 preparation, this preparation is a modification of the exhaust port by increasing the diagrams and improving the pipe, it increases the performance of the cylinder. An improvement of the bottom of skirt is also included in this modification. Allow a little extra time for this preparation!
Mounts on :
2 stroke engine scooter minarelli horizontal liquid
Motor 2 Time scooter minarelli horizontal air spent in liquid (long only)
APRILIA AREA 51 LC
APRILIA GULLIVER 50
APRILIA SR NETSCAPER 50 LC
APRILIA RALLY 50 LC
APRILIA SR RACING 50 LC
APRILIA SONIC LC
APRILIA SR REPLICA LC
APRILIA SR STEALTH
BENELLI 491 SPORT LC
BENELLI K2 50 LC
BETA ARK 50 LC
BETA EIKON 50 LC
GARELLI GSP 50 LC
ITALJET DREAGSTER 50 LC
MALAGUTI F15 FIREFOX 50 LC
MALAGUTI F12 DIGIT KAT LC
MALAGUTI F12 PHATOM LC
MALAGUTI F12 R LC
MBK MACH G 50 LC
MBK NITRO 50 LC
YAMAHA AEROX 50 LC
YAMAHA JOGRR 50 LC
Reference: 6611785B
High quality needle cage, reinforced! ideal on the most advanced configurations.
Reference: 36 4450
Do not forget to change at each winding to prevent engine failure thereafter.
Reference: 38 9513
For stud head only, covers aluminum cylinder head essential to replace your old piece out of use.
Reference: 1113209B
A seal pack upscale, essential for a safe winding and leakage.
Reference: 19 9419Q
Ideal for replacing your old bolts MALOSSI MHR.
Reference: 27 8359B
Essential for the refurbishment of your cooling system.
Reference: 3513982B
Ideal for refurbishing your high engine.
Reference: 2312580
Reinforced MALOSSI piston pin, ideal for the loss of the old piston pin!
Reference: 38 9512
A replacement stud with a high compression chamber of very good quality.
Reference: 34 8180
Excellent for refurbishing your MALOSSI kit. Piston to change every 8,000 to 10,000 km!
Reference: 9931310
A kit that offers very good torque, good speed but also a lot of strength! In addition to this, you need to know more about it.
Reference: 9929340
The top in case of clamping, kit TOP PERFORMANCES for normal running vilebrequin 39.2 on liquid horizontal minarelli (scooter nitro, aerox and many others).
Reference: 010735476
An ultra high motor racing, high performance while it has reasonable price.
Reference: 31 8459
For more performance and a solid engine! This 70cc kit will be very good for equipping your scooter with a low horizontal Minarelli / Yamaha engine.
Reference: P400485100043
Must of all the kits ATHENA with a stud bolt for better gas explosion and a better engine cooling.
Reference: 3112642.T0
Kit MALOSSI MHR TEAM 2 Factory Ø47.6mm axis Ø13mm for minarelli horizontal liquid (nitro, aerox, ...)
Reference: EQ-754
High performance version from BARIKIT in 10 transfers!
Reference: 9912800
The famous TOP PERFORMANCES ROSE diameter 47mm solid and efficient.
Reference: 11000733
Ideal for mounting a large engine configuration on your NITRO & AEROX.
Reference: EQ-707
A perfect kit to ride every day and over long distances without being afraid of heating or primer.
Reference: 166.0083/R
Very efficient and solid, the famous POLINI CORSA hand retouched at POLINI!
Reference: 166.0083
Ideal to increase the performance of your scooter engine drastically!
Reference: 072400
A wonderful kit that announces high performance while maintaining high strength.
Reference: 31 8430
A very good compromise between strength and power!
Reference: 9921160
The famous TOP PERFORMANCES ROSE with top of the range cylinder head with stud (two parts) diameter 47mm solid and powerful.
Reference: 166.0110
The excellent BIG evo for crankshaft normal stroke 39.2mm with long rod 85mm.