Reference: 9910550
Piston mono segment TOP PERFORMANCES Ø47 or 47,4mm axis 10mm kit 70cc TOP ROSE scooter minarelli horizontal liquid
Replacement mono segment piston for kit TOP PERFORMANCES ROSE Ø47mm and reaming side.
Banner
The most powerful cast iron kit after the pink Top performance for minarelli liquid scooter, it is a minacrom cast iron cylinder. It is the only one in its category which is cast in two segments with the black top to have 8 transfers, 6 of which are opposite and two are placed later to optimize the filling. The exhaust is normal and the mono segment piston is in reinforced alloy. It is relatively torquey, powerful and solid, it really has a great reputation already abroad because it can be expensive, very solid, clean, torquey, powerful, only good, some do up to 25,000 km with this type of kit by changing the piston every 10,000 without even reaming.
Peak level is also very impressive. You can also do a lot of km because it is very solid (it's the magic of minacrom cast iron) and you can rebore it at a lower cost in 47.4mm diameter (we have all the spare parts). Preparation possible on request. You can also place a liquid minarelli pink top piston on it which will allow you even more power and high speed because in mono segment, treatment and different alloy. You can also boost it with a two-part pink top cylinder head that can be installed without modifications on it. The combustion chamber of its cylinder head is in high compression studied and tapered but unfortunately not polished.
We recommend fitting at least with this kit: racing exhaust, cold racing spark plug, 17.5mm carburetor, reinforced bearings and crankshaft.
As an option we offer you a stage 1 preparation, this preparation is a modification of the channels and the exhaust port by increasing the diagrams and improving the duct, it increases the performance of the cylinder. An improvement of the piston and the lower skirts is also included in this modification. Count a little extra time for this preparation!
Bore: 47mm
Displacement: 68cc in 39.2mm stroke
Compression ratio: 1:13
The pack contains:
-piston d.47mm reinforced bi segment d.47mm
-reinforced hard chrome segments
- treated reinforced piston pin
-reinforced piston clips
- cylinder minacrom cast iron 8 transfers normal exhaust
-complete seal pack
-collar pack / screws
- cylinder head d.47mm polished high compression chamber
-notice
-sticker
Spare parts :
Mounts on :
2-stroke horizontal liquid scooter minarelli engine
2-stroke engine scooter minarelli horizontal air passed in liquid (long only)
APRILIA AREA 51 LC
APRILIA GULLIVER 50
APRILIA SR NETSCAPER 50 LC
APRILIA RALLY 50LC
APRILIA SR RACING 50 LC
APRILIA SONIC LC
APRILIA SR REPLICA LC
APRILIA SR STEALTH
BENELLI 491 SPORT LC
BENELLI K2 50LC
BETA ARK 50 LC
BETA EIKON 50 LC
GARELLI GSP 50 LC
ITALJET DREAMSTER 50 LC
MALAGUTI F15 FIREFOX 50 LC
MALAGUTI F12 DIGIT KAT LC
MALAGUTI F12 PHATOM LC
MALAGUTI F12 R LC
MBK MACH G 50 LC
MBK NITRO 50LC
YAMAHA AEROX 50LC
YAMAHA JOGRR 50LC
Reference: 9910550
Replacement mono segment piston for kit TOP PERFORMANCES ROSE Ø47mm and reaming side.
Reference: GR00713
An ideal quality seal pack in the event of an engine leak or for the maintenance of your 70cc kit.
Reference: PT00102
Complete replacement piston for vertical and horizontal minarelli scooter engine.
Reference: SG15284
Ideal for the maintenance of your cylinder / piston 70cc in diameter 47mm on minarelli motor scooter.
Reference: TS00175
High compression replacement cylinder head for kit 70cc Ø47mm model for minarelli horizontal liquid cooled engine.
Reference: GR00711
For refurbishment of your high engine 70cc black DR Racing on minarelli horizontal liquid scooter.
Reference: 9931310
A kit that offers very good torque, good speed but also a lot of strength! In addition to this, you need to know more about it.
Reference: 31 8430
A very good compromise between strength and power!
Reference: 3112642.T0
Kit MALOSSI MHR TEAM 2 Factory Ø47.6mm axis Ø13mm for minarelli horizontal liquid (nitro, aerox, ...)
Reference: 31 8460
For more performance and a strong engine! This 70cc will be very good to equip your scooter with low Minarelli / Yamaha engine horizontal.
Reference: 01073450
A high ultra racing engine, very powerful all this at a price never seen for such quality.
Reference: 31 8459
For more performance and a solid engine! This 70cc kit will be very good for equipping your scooter with a low horizontal Minarelli / Yamaha engine.
Reference: 081100
A kit with even further diagrams for a bigger performance boost on your scooter liquid.
Reference: EQ-754
High performance version from BARIKIT in 10 transfers!
Reference: 010726476
A very good price / quality, performance and torque! Luxury model.
Reference: 3113262
A very good compromise between strength and power!
Reference: 072400
A wonderful kit that announces high performance while maintaining high strength.
Reference: EQ-995-S
The famous 47mm (70cc) aluminum BARIKIT Racing! A powerful cylinder accompanied by a good engine configuration. 50cc motorcycle engine with liquid scooter minarelli (nitro, aerox ...).
Reference: P400485100043
Must of all the kits ATHENA with a stud bolt for better gas explosion and a better engine cooling.
Reference: EQ-707
A perfect kit to ride every day and over long distances without being afraid of heating or primer.
Reference: 9921160
The famous TOP PERFORMANCES ROSE with top of the range cylinder head with stud (two parts) diameter 47mm solid and powerful.
Reference: 9929340
The top in case of clamping, kit TOP PERFORMANCES for normal running vilebrequin 39.2 on liquid horizontal minarelli (scooter nitro, aerox and many others).