Reference: 9910060
Complete seal pack for kit TOP PERFORMANCES 70cc black and normal pink on minarelli horizontal liquid scooter
Indispensable for the refurbishment of your top engine Top Performances Black or Pink 70cc.
Banner
Attention, parts only reserved for competition, prohibited on the road!
A fairly powerful cast iron kit after the Pink Top performance for liquid minarelli motor scooter, it is a cast iron cylinder with minacrom treatment. This kit has 8 transfers, 6 of which are opposite and two are placed later to optimize the filling of the intake.
The exhaust is normal (oval) and the two-segment piston is high silicon content with a reinforced alloy. This kit is relatively torquey, powerful and solid, some make up to 25,000 km with this type of kit by changing the piston every 10,000 km without even a bore. Point level is also very impressive.
In addition to this, you need to know more about it.
You will also be able to do a lot of kms because it is very solid (this is the magic of minacrom cast iron) and you can bore it inexpensively in 47.4mm diameter (we have all the spare parts).
In addition to this, you need to know more about it.
You can boost it with a bi-part pink top part which can be installed without modifications on it. The combustion chamber of its cylinder head is in high compression studied and hemispherical but unfortunately not polished. Delivered as presented.
We advise to mount it at least with: racing exhaust, cold racing spark plug, 17.5mm carburetion, reinforced bearings and crankshaft.
Bore: 47mm
Displacement: 68cc in 39.2mm stroke
Compression ratio: 1:13
The pack contains:
-piston d.47mm reinforced bi segments d.47mm
-2 segments reinforced hard chrome
-treated reinforced piston pin Ø10 X 38mm
-refrocated piston clips
-cylinder minacrom cast iron 8 transfers normal exhaust
-pack complete seal
-pack collar / screws
- cylinder head d.47mm polished high compression chamber
-notice
-sticker
As an option we offer a stage 1 preparation, this preparation is a modification of the exhaust port by increasing the diagrams and improving the duct, it increases the performance of the cylinder. An improvement to the bottom of the skirt is also included in this modification. Allow a little extra time for this preparation!
Mounts on:
Liquid horizontal 2 stroke scooter minarelli engine
2 stroke horizontal minarelli scooter engine with liquid air (long only)
APRILIA AREA 51 LC
APRILIA GULLIVER 50
APRILIA SR NETSCAPER 50 LC
APRILIA RALLY 50 LC
APRILIA SR RACING 50 LC
APRILIA SONIC LC
APRILIA SR REPLICA LC
APRILIA SR STEALTH
BENELLI 491 SPORT LC
BENELLI K2 50 LC
BETA ARK 50 LC
BETA EIKON 50 LC
GARELLI GSP 50 LC
ITALJET DREAGSTER 50 LC
MALAGUTI F15 FIREFOX 50 LC
MALAGUTI F12 DIGIT KAT LC
MALAGUTI F12 PHATOM LC
MALAGUTI F12 R LC
MBK MACH G 50 LC
MBK NITRO 50 LC
YAMAHA AEROX 50 LC
YAMAHA JOGRR 50 LC
Specific References
Reference: 9910060
Indispensable for the refurbishment of your top engine Top Performances Black or Pink 70cc.
Reference: 9931330
Piston bi replacement segment for kit 70cc TOP PERFORMANCES BLACK "TROPHY" on motor scooter MINARELLI Vertical & YAMAHA.
Reference: 9906052
Ø47 quality segments or Ø47,4mm for high melting engine kit.
Reference: 9909540
Cylinder head of replacement for kit Ø47mm TOP BLACK PERFORLANCES "TROPHY".
Reference: 166.0083/R
Very efficient and solid, the famous POLINI CORSA hand retouched at POLINI!
Reference: 31 8459
For more performance and a solid engine! This 70cc kit will be very good for equipping your scooter with a low horizontal Minarelli / Yamaha engine.
Reference: 01073450
A high ultra racing engine, very powerful all this at a price never seen for such quality.
Reference: EQ-754
High performance version from BARIKIT in 10 transfers!
Reference: EQ-995-S
The famous 47mm (70cc) aluminum BARIKIT Racing! A powerful cylinder accompanied by a good engine configuration. 50cc motorcycle engine with liquid scooter minarelli (nitro, aerox ...).
Reference: 31 8460
For more performance and a strong engine! This 70cc will be very good to equip your scooter with low Minarelli / Yamaha engine horizontal.
Reference: KT00109
A kit that offers torque, speed but also a lot of solidity!
Reference: P400485100043
Must of all the kits ATHENA with a stud bolt for better gas explosion and a better engine cooling.
Reference: 072400
A wonderful kit that announces high performance while maintaining high strength.
Reference: 3115390
Replacing the famous MALOSSI MHR TEAM!
Reference: 9929340
The top in case of clamping, kit TOP PERFORMANCES for normal running vilebrequin 39.2 on liquid horizontal minarelli (scooter nitro, aerox and many others).
Reference: P400485100044
The must of all ATHENA kits with a bolted cylinder head for better gas explosion and better engine cooling.
Reference: 9912800
The famous TOP PERFORMANCES ROSE diameter 47mm solid and efficient.
Reference: 166.0110
The excellent BIG evo for crankshaft normal stroke 39.2mm with long rod 85mm.
Reference: 010713476
The cheapest aluminum cylinders, made in spain, AIRSAL is good and offers good performance at a reduced price.
Reference: 11000733
Ideal for mounting a large engine configuration on your NITRO & AEROX.