Reference: 23152.04
Cylinder head Ø47mm for PARMAKIT 70cc bi-segments kit on DERBI euro 1 & 2 engine
PARMAKIT spare cylinder head for 70cc Ø47mm kit on DERBI euro 1 & 2 engine.
Banner
Attention, not approved on road, only reserved for the competition.
Here is the 70cc kit Ø47mm diameter of the Italian house PARMAKIT for DERBI euro 1 and 2. This kit is a model 5 reviewed and improved transfers, a large exhaust has booster and has a clean finish. A piston VERTEX high bi-range segment and a machined aluminum cylinder head will accompany this high engine!
Indeed, a really nice kit of share performance as the elements that accompany it. It has a specific treatment and charts that give you as a couple that diets high. Its transfers have expanded and reworked. Its oval exhaust is equipped with boosters ever improving sweeping gas.
His head is a high-compression model has hemispherical room polished, billet aluminum. The piston is a top two-segment model range as it is directly sunk by VERTEX and designed to give maximum performance at this high engine. It is equipped with 2 segments chrome purposes treated in specific steels for high speeds (reducing friction) while maintaining a generous torque! Comes complete however without cylinder head bolts but it's a detail ...
With this kit we recommend a minimum: crankshaft and reinforced bearings, carburation 21mm, exhaust racing, cold spark plug racing ...
RRP € 178.80
The pack contains:
5 iron cylinder transfers Ø47mm
Cylinder machined aluminum high-compression chamber
VERTEX piston bi-segments
Piston Pin
Clips (pin ring)
Two end chrome treated specific segments
Screw fixing exhaust outlet / pot
Pack joined
Instructions for use
Sticker
Spare parts:
Piston
Segment
Cylinder head
Pack joined
Optional we offer a preparation course 1, this preparation is a modification of the exhaust port by increasing the charts and improvement of the duct, it increases the cylinder performance. Improved bottom skirt is also included in the amendment. Allow a little extra time for this preparation!
This high engine fits the 50cc motorcycles équpées gearboxes from Euro1 and Euro2 DERBI:
BULTACO Astro Enduro 50cc
BULTACO Lobito 50cc supermoto
Derbi GPR 50 Nude before 2004 (EBS050)
Derbi GPR 50 Racing before 2004 (EBS050)
Derbi GPR 50R Replica year 2001-2004
Derbi GPR 50cc year 1998-2001
Derbi Senda 50cc before 2000 (tubular frame)
Derbi Senda 2000 50cc before 2004 (perimeter frame) Euro2
Derbi Senda DRD supermotard before 2000 (tubular frame)
Derbi Senda DRD supermotard before 2004 (perimeter frame) Euro 2
Derbi Senda Enduro before 2000 (tubular frame)
Derbi Senda DRD R enduro before 2000 (tubular frame)
Derbi Senda DRD R enduro before 2004 (perimeter frame) Euro2
Derbi Senda SM before 2000 (tubular frame)
Derbi Senda SM before 2004 (perimeter frame) Euro 2
Derbi Senda X-Race 2000 before 2004 (perimeter frame) Euro 2
Derbi Senda X-Race Trail before 2000 (tubular frame)
Derbi Senda X-Trem Enduro before 2000 (tubular frame)
Derbi Senda X-Trem Enduro before 2004 (perimeter frame) Euro 2
Derbi Senda SM X-Trem before 2000 (tubular frame)
Derbi Senda SM X-Trem before 2004 (perimeter frame) Euro 2
GILERA GP Replica 50cc
GILERA GSM 50cc
GILERA 50cc HAK Euduro
GILERA RCR Euduro 50cc (tubular frame)
GILERA SMT SM 50cc (tubular frame)
GILERA Sioux Enduro 50cc
GILERA Zulu Enduro 50cc
And many other models ...
Reference: 23152.04
PARMAKIT spare cylinder head for 70cc Ø47mm kit on DERBI euro 1 & 2 engine.
Reference: 23152.03
Essential for the refurbishment of your high engine 70cc PARMAKIT 47mm in diameter.
Reference: 23152.02
Ideal to maintain your kits 70 PARMAKIT 47mm diameter case of loss of compression or wear on your motorcycle Derbi.
Reference: 01081548
Very good racing in 75cc at low prices, less torquey but a little more powerful than the luxury version.
Reference: 01089950
The brand new kit from AIRSAL which develops a lot of power!
Reference: G-992-R
Version 48mm 75cc cylinder head stud prepared by professionals BARIKIT. Even more powerful than other 75cc BARIKIT!
Reference: 01080945
Ideal to restore to nine of your old engine mécaboite 50cc DERBI FENIX!
Reference: 3111693
A beautiful kit powerful, torquey and strong to DERBI The MALOSSI MHR REPLICA is bi-segment unlike MHR or the team, also cheaper!
Reference: G-988-R
The 80cc standard cylinder 50mm version prepared by professionals BARIKIT. Even more powerful than other 80cc BARIKIT!
Reference: CK.12.751.G1
For those looking for the powerful kit, strong and torquey! Mono-segment standard cylinder Sport model.
Reference: CK.12.750.G
The bi-segment version with cylinder head stud BARIKIT in 75cc for your DERBI Euro 2 engine, very torquey and strong, he does not neglect high revs! High quality certified!
Reference: 02080347
Ideal to restore to the new cylinder / piston from your old mécaboite 50cc DERBI FENIX and increase performance at the same time! Sold without head.
Reference: EQ-739
The version of 70cc RACING BARIKIT, with ups charts! More powerful, but does not neglect the couple, high motor guy with head Metrakit maintained by 2 screws and studs, solid cast iron cylinder, 5 transfers, oval exhaust with booster, dual piston segments ...!
Reference: 3112376
The famous and recognized MALOSSI MHR TEAM 80cc, ultra powerful, torquey and ultra ultra strong! Simple but so good ...
Reference: EQ-779
The famous large diameter of BARIKIT for DERBI motorcycle ... Almost identical to FURYTECH!
Reference: 11000072
Kit 70cc BIDALOT Racing Replica for big performances on DERBI euro 1 & 2.
Reference: EQ-741
In the type of DR RACING and black TOP PERFORMANCES, here BARIKIT Fonte for DERBI euro 2 GPR50 ... with mounted cylinder head O-ring, 5 transfers, oval exhaust boosters, solid cast iron piston ... two segments.
Reference: 23156.00
Flat piston mono-segment, large diagrams, 6 transfers, exhaust boosters .... Everything is there !!!
Reference: 109.0013
Here is the most powerful kit of fonts for DERBI euro 1 and 2. It is very powerful and announces 17,5cv / 12,300 / min at POLINI. What to surprise more than one.