• Banner

kit 70cc Ø45mm AIRSAL aluminum air for MBK 88, AV44 ... / motobecane av7 (rounded)
  • kit 70cc Ø45mm AIRSAL aluminum air for MBK 88, AV44 ... / motobecane av7 (rounded)

Kit 70cc Ø45mm AIRSAL aluminum air for MBK 88, AV44 ... / motobecane av7 (rounded)

02140345

A kit that makes an excellent compromise between torque, power and life. A price always challenging all competitions.

Stage 1 engine preparation
€49.99
Quantity
Shipping in 20 to 90 days depending on factory arrivals.

Description

Ideal for the enthusiast who wants to give a little punch to his engine av7 in all discretion. Here is the cylinder of AIRSAL large diameter Ø45mm (70cc kit) for motobecane motor av7 round (not square). This kit is improved in relation to the origin, the light of amission has been enlarged, the diagrams are revised on the rise.



The shape of the transfers is improved as well, the price is really low for this model. This cylinder has a bi-segment piston, it is delivered complete however, there is no exhaust gasket or gasket. This kit will offer a small gain of high speed and a couple breathtaking at all for a really ridiculous price.



The quality is however present, the cylinder is aluminum, treated with a good nikasil, the finish is not bad, it will be able to make many km without any problems. We still recommend a 17.5mm carburetor, a fairly cold candle (B9) and a very unbridled escapement to get the calories out of this small thermal group, the LEOVINCE SPEED exhausts work very hard on this cylinder stock, if the engine is more equipped we will recommend the muffler WARM UP NINJA, and if you retouch the diagrams, really prepare the engine so that it offers power, the NINJA G2 REPLICA will be the most appropriate.



The pack contains :

-Piston

-Segments

-Axis

-Piston clips

-Leg seal

-Cylinder

-Pipe fixing studs



Optionally we offer a stage 1 preparation, this preparation is a modification of the channels and exhaust light by increasing the diagrams and improving the pipe, it increases the performance of the cylinder. An improvement of the piston and skirt stocking is also included in this modification. Allow a little extra time for this preparation!

 

Mounts on all AV7 engines, therefore the following mopeds :

Mobylette Motobecane / Motoconfort Series 40 / 40T / 40S / 40L / N40S / N40 / 40TS / 40TL / N40TS / N40TL / 40VS / 40VL / H40S / H40L / H40TS / H40TL / H40VS / H40VL / H40TLC / H40VLC
Mobylette Motobecane / Motoconfort AV41 / AU41
Moped Motorcycle bike / Motoconfort AV42 / AU42
Mobylette Motobecane / Motoconfort AV43 / AU43
Mobylette Motobecane / Motoconfort AV44 / AU44
Mobylette Motobecane / Motoconfort AV46 / AU 46
Mobylette Motobecane / Motoconfort AV48 / AU48
Mobylette Motobecane / Motoconfort AV49 / AU 49
Mobylette Motobecane / Motoconfort Series 50 / 50S / 50VS / 50L / 50VL / G50S / G50LC / G50VS / G50VLC / H50S / H50LC / H50VS / H50VLC
Mobylette Motobecane / Motoconfort AV56 / AU56
Mobylette Motobécane / Motoconfort AV59 / AU59
Mobylette Motobecane / Motoconfort AV65 / AU65
Mobylette Motobecane / Motoconfort AV68 / AU68
Mobylette Motobecane / Motoconfort AV76 / AU76
Mobylette Motobecane / Motoconfort AV78 / AU78
Mobylette Motobecane / Motoconfort AV79 / AU79
Mobylette Motobecane / Motoconfort AV85 / AU85
Mobylette Motobecane / Motoconfort AV87 / AU87
Mobylette Motobecane / Motoconfort AV88 / AU88
Mobylette Motobecane / Motoconfort AV89 / AU89
Motobecane / Motoconfort Mobylette MobyX X7
Mobylette Motobécane / Motoconfort SPR (Road Special)
Mobylette Motobécane / Motoconfort SP50 (Special 50)

 

It is also compatible on AV3x and AU3x with AV7 engine. On these models, a difference is obviously visible.

 

Motobecane original references: 19478/23461/23460

Product Details
02140345
New product

Data sheet

Exhaust Diagram:
Matière
Cylindrée réelle
Nombre de transferts d'admission
Intake diagram (lateral transfers):
Nombre de segment
Lumière d'échappement
You might also like
5 other products in the same category: