Reference: 4128
CGN base gasket for original cylinder or other on MBK / AV7 motobecane
Ideal for tight and leak-free reassembly.
Banner
Ideal for enthusiasts who want to give a little punch to their AV7 engine with ease. Here is the 75cc BARIKIT aluminum cylinder with a bore Ø47mm for square motobecane av7 engine (not round). This kit is revised and corrected upwards in relation to the origin, the intake light has been enlarged, the diagrams are higher.
The quality is very present, the cylinder is made of aluminum, treated with a good nikasil, the finish is not bad, it can clearly go many kilometers without any problems.
The form of transfers has also improved, the price is really low for this successful model. This cylinder is accompanied by a bi-segment piston, delivered complete, however be careful, there is no exhaust gasket or base gasket. This kit will offer a small gain of high revs and a higher torque.
We still recommend a carburetor of 17.5mm see 19mm (21mm if the engine is very equipped and why not prepared), a fairly cold spark plug (B9) and a well unbridled exhaust to bring out the calories from this small thermal group, LEOVINCE SPEED exhausts work very hard on this stock cylinder, if the engine is more equipped we will recommend the WARM UP exhaust from NINJA, and if you touch up the diagrams, really prepare the engine so that it offers power , the NINJA G2 REPLICA will be the most suitable.
The pack contains:
-Piston bi segment Ø47mm
-Segments Ø47mm X 1,5mm
- Piston pin Ø13 X 37mm
- Crab type piston clips
-Reinforced cylinder head gasket
Aluminum cylinder Ø47mm 3 transfers with improved exhaust outlet
Optionally we offer a stage 1 preparation, this preparation is a modification of the channels and the exhaust light by increasing the diagrams and improving the duct, it increases the performance of the cylinder. An improvement in the piston and bottom of the skirt is also included in this modification. Allow a little extra time for this preparation!
Square shape like the origins of the following mopeds :
Motobécane / Motoconfort / MBK AV89 / AU89 / 89 Moped
Motobécane / Motoconfort AV92 / AU92 / 92N Moped
Motobécane / Motoconfort SP93 (Special 93) / SP93D / SP93DL
Motobécane / Motoconfort SP94 TT (Special 94TT) / SP94TTé
Motobécane / Motoconfort AV98 Sommet Moped
Motobécane / Motoconfort SP98 (Special 98)
Motobécane / Motoconfort original reference: 18970
Also mounts on all AV7 engines, so the following mopeds :
Motobécane / Motoconfort series 40 / 40T / 40S / 40L / N40S / N40 / 40TS / 40TL / N40TS / N40TL / 40VS / 40VL / H40S / H40L / H40TS / H40TL / H40VS / H40VL / H40TLC / H40VLC
Motobécane / Motoconfort AV41 / AU41 Moped
Motobécane / Motoconfort AV42 / AU42 Moped
Motobécane / Motoconfort AV43 / AU43 Moped
Motobécane / Motoconfort AV44 / AU44 Moped
Motobécane / Motoconfort AV46 / AU 46
Motobécane / Motoconfort AV48 / AU48 Moped
Motobécane / Motoconfort AV49 / AU 49 Moped
Motobécane / Motoconfort series 50 / 50S / 50VS / 50L / 50VL / G50S / G50LC / G50VS / G50VLC / H50S / H50LC / H50VS / H50VLC
Motobécane / Motoconfort AV56 / AU56 Moped
Motobécane / Motoconfort AV59 / AU59 Moped
Motobécane / Motoconfort AV65 / AU65 Moped
Motobécane / Motoconfort AV68 / AU68 Moped
Motobécane / Motoconfort AV76 / AU76 Moped
Motobécane / Motoconfort AV78 / AU78 Moped
Motobécane / Motoconfort AV79 / AU79 Moped
Motobécane / Motoconfort AV85 / AU85 Moped
Motobécane / Motoconfort AV87 / AU87 Moped
Motobécane / Motoconfort AV88 / AU88 Moped
Motobécane / Motoconfort AV89 / AU89 Moped
MobyX Motobécane / Motoconfort MobyX X7
Motobécane / Motoconfort SPR (Special Road) Moped
Motobécane / Motoconfort SP50 Moped (Special 50)
It is also compatible on AV3x and AU3x with AV7 engine. On these models, a difference is obviously visible.
Reference: 4128
Ideal for tight and leak-free reassembly.
Reference: 4065
Ideal for leak-free reassembly, change at each reassembly for a watertight and reliable engine!
Reference: RRD480969_47mm
Finally a quality, high-performance cylinder head with a 47mm diameter for your MOTOBECANE MBK 85 - 88 AV7 engine equipped with a Ø47mm kit! Old model with high engine mounting.
Reference: P-442-S
The complete piston replacement for refurbishing your Ø47mm cylinder.
Reference: JUN-944
Ideal for refurbishment after disassembly, essential to avoid loss of compression!
Reference: S/44
Segment of very good quality, ideal for maintaining your high engine kit 70cc BARIKIT 47mm in diameter.
Reference: AV7NM47mm
Finally a quality, efficient cylinder head and 47mm diameter for your MOTOBECANE MBK 40 - 50 AV7 engine equipped with a Ø47mm kit! New model with "low" engine mounting.
Reference: P-442-1S
The complete replacement piston for refurbishing your Ø47mm cylinder. Also makes AIRSAL cylinders more reliable. Allows the passage of AV7 kits in mono-segment!