• Banner

Kit 70cc Ø47,6mm (axe de 12mm) aluminium AIRSAL T6 mono-segment pour KEEWAY, CPI,...
  • Kit 70cc Ø47,6mm (axe de 12mm) aluminium AIRSAL T6 mono-segment pour KEEWAY, CPI,...

Kit 70cc Ø47,6mm AIRSAL T6 aluminum mono-segment scooter KEEWAY HURRICANE, F-ACT, CPI HUSSAR, OLIVER, POPCORN, ...

013004476

A review kit and worked while keeping a reasonable price.

Stage 1 engine preparation
€99.99
Quantity
Shipping in 20 to 90 days depending on factory arrivals.

Description

Attention parts only reserved for the competition, prohibited on road!


Here is the best value kits 70cc aluminum market. This is the AIRSAL T6 70cc Ø47,6mm. This cheap cylinder does not neglect the quality are the performance, 47,6mm diameter high-end aluminum.

vue Kit 70cc Ø47,6mm (axe de 12mm) AIRSAL T6 aluminium mono-segment pour KEEWAY, CPI,...

It has 6 transfers of admission and an exhaust with bar.
The diagrams are pretty high at admission and low enough to escape making the torquey and not difficult to follow or set. The piston is a mono-segment model with side grease! Clearly this kit has a very good ratio torque / power, it offers plenty of performance while preserving a great strength!

admission Kit 70cc Ø47,6mm (axe de 12mm) AIRSAL T6 aluminium mono-segment pour KEEWAY, CPI,...

The piston is mono-segment model with chrome domed segment hard, it has side oilers and a light preparation on the rear apron to improve scanning. The finish is really on top. We advise you to align transfers to lower casings engine.

echappement Kit 70cc Ø47,6mm (axe de 12mm) AIRSAL T6 aluminium mono-segment pour KEEWAY, CPI,...

The cylinder head is a high-compression chamber is incoming to have good alignment chamber / cylinder is a good performance head gaskets. The room is a polished hemispheric model. This cylinder head allows you to reconnect if desired antifreeze on your carburetor. It will certainly be less effective than MALOSSI MHR, BIDALOT or Polini ... But there will already very good.

transferts Kit 70cc Ø47,6mm (axe de 12mm) AIRSAL T6 aluminium mono-segment pour KEEWAY, CPI,...

We recommend to accompany this kit with:   carburation 19mm (carbon flaps slats 0.30mm or 0.35mm), crankshaft and reinforced bearings, exhaust racing, candle racing ...

The pack contains:

X1 Cylinder
X1 Cylinder
X1 Piston
X1 Segment
1X Piston Pin
2X piston Clips
X1 Pack seals
X1 hardware

X1 Instructions

zoom Kit 70cc Ø47,6mm (axe de 12mm) AIRSAL T6 aluminium mono-segment pour KEEWAY, CPI,...

Optional we offer a preparation course 1, this preparation is a modification of the channels and the exhaust port by increasing the charts and improvement of the duct, it increases the cylinder performance. Improved piston and bottom skirt is also included in the amendment. Allow a little extra time for this preparation!

Itself on:

BENELLI Pepe
BENELLI Quattronovex

CPI Aragon
CPI Hussar
CPI Oliver
CPI Popcorn

EXPLORER Cracker

GARELLI Tiesse

Hüpper Montecarlo

KEEWAY F-act
KEEWAY Matrix
KEEWAY Goccia
KEEWAY Hurricane
KEEWAY Pixel
KEEWAY RY8

montage Kit 70cc Ø47,6mm (axe de 12mm) AIRSAL T6 aluminium mono-segment pour KEEWAY, CPI,...

Product Details
You might also like