Reference: S/41
Segment Ø47 X 1mm for cast iron and aluminum BARIKIT kit on SUZUKI RMX, MINARELLI am6, DERBI, MBK, YAMAHA and PIAGGIO ...
Ideal quality segment for the maintenance of your BARIKIT 70cc high engine kit.
Banner
Attention parts only reserved for the competition, prohibited on road!
We offer you the 70cc cast in BARIKT in 70cc Ø47mm. The cylinder / piston with the cylinder head, affordable does not neglect the quality or performance. 47mm diameter, cast iron. It has 5 transfers intake and oval exhaust.
The piston is bi-model segments with segments purpose, steels, hard, bulging. It has a light preparation on the rear apron to improve scanning and filling of admission. The finish is good.
The cylinder head high compression polished hemispheric model. This kit will certainly be less effective than MALOSSI MHR, BIDALOT or Polini ... But there will already very good.
The charts were reviewed were making the torquey and not difficult to follow or set. Clearly this kit has a very good ratio torque / power, it offers plenty of performance while preserving a great strength!
We recommend to accompany this kit with: carburation 19mm (carbon flaps slats 0.30mm) drive racing, crankshaft and reinforced bearings, exhaust racing, candle racing ...
The pack contains:
X1 cylinder cast iron 5 transfers
X1 aluminum cylinder head hemispherical room polished finish
X1 Piston dual segments with preparation on rear skirt
X2 Segments, purpose, steels, hard, bulging 1mm thick
X1 Piston pin Ø12mm X 39mm
X2 crab-like piston Clips
Pack X1 engine top seal
Itself on:
BS VILLA DIO ZX 50
BSV DIO GP 50
BSV DIO SP50
BSV SR 50
HONDA G / GP 50
HONDA DIO SP 50
HONDA DIO ZX 50
HONDA DIO SR 50
HONDA SHADOW SRX 50
HONDA SRX 50
KYMCO CX 50 (1993 / -)
KYMCO Super CX 50 (1994/1997)
KYMCO DJ 50 W (1994/2000)
KYMCO DJ 50 X (1991/1992)
KYMCO DJ 50 Y (1993 / -)
KYMCO ZX FEVER 50 (1999/2000)
KYMCO ZX euro FEVER 2 50 (2003/2004)
KYMCO K12 50 (1995/2000)
KYMCO KB 50 (1995/2000)
SYM DD 50 (2002 / -)
SYM DD euro 2 50 (2003/2007)
And many other models ...
Optional we offer a preparation course 1, this preparation is a modification of the channels and the exhaust port by increasing the charts and improvement of the duct, it increases the cylinder performance. Improved piston and bottom skirt is also included in the amendment. Allow a little extra time for this preparation!
Reference: S/41
Ideal quality segment for the maintenance of your BARIKIT 70cc high engine kit.
Reference: P-476
Full Replacement Piston for 70cc cast BARIKIT kit on scooter HONDA, KYMCO, BSV ....
Reference: CUL-713
Cylinder head of replacement for kits BARIKIT cast in 47mm diameter.
Reference: JUN-713
Pack joined complete engine above. Ideal for secure mounting and leak.
Reference: 119.0077/R
Cast iron model, improved racing for more performance!
Reference: 02160246
Escapement barrete, piston mono-segment, 46mm in diameter! A good little monster power!
Reference: 013002476
A review kit and worked while keeping a reasonable price and lifetime extension cord.
Reference: P400099100001
A very powerful and high quality kit for your KEEWAY, CPI, GENERIC 50cc 2T scooters ... RACING version with barrel exhaust and flat cap piston!
Reference: 02044146
Powerful and strong, this 70cc is an excellent quality / price / power!
Reference: 39120.00
A very good little 70cc scooter and quad KYMCO 50cc 2T!
Reference: CI.60.650.G
High quality high performance kit, delivered with its cylinder head for your HYOSUNG, AGRALE, ATALA, SIAM ... 50cc 2T scooters.
Reference: 31 9987
A torquey and solid kit for your 50cc 2-stroke scooter!
Reference: 3113570
A torquey and very solid package. Ideal for everyday use.
Reference: 125.0008
Strong and powerful, ideal to give punch to your scooter!
Reference: 013004476
A review kit and worked while keeping a reasonable price.
Reference: 3113067
A kit without cylinder head but that mounts with original cylinder head for a low price while maintaining performance.
Reference: 3113066
A powerful kit is very solid that can reach more than 25 000km without problem.
Reference: EQ-756
A high performance 70cc engine with lots of torque for KYMCO quads and scooters with 50 cylinder admission. Delivered with its cylinder head.
Reference: 083000
High performance kit of high quality, delivered with its cylinder head for your scooters HYOSUNG, AGRALE, ATALA, SIAM ... 50cc 2T.
Reference: 31 8091
An excellent 70cc kit for KYMCO 50cc scooters and quads! To accompany your original cylinder head, torque and power in all solidity for your quads and scoots!