Reference: 36 1806
Clips, rods of MALOSSI piston pin in axis Ø 12mm type G d.1mm
Do not forget to change at each reassembly.
Banner
Here is a 65cc kit from malossi, with its reinforced cast piston and are bi segment is really strong but powerful by its well-defined diagrams, diameter of 44.5mm and admission. Just as the POLINI, this MALOSSI is an improved kit, it has re-worked channels of a dual-segment piston side with nipples and specific apertures for filling and improve scanning ...
Its large diameter of 44.5mm offer the vicinity of 65cc engine torque and power. Ideal to give some punch to your old DT, MX, TY ... Or MBK ZX. Few mount combination of the cylinder head of origin!
Itself on:
MBK ZX (automatic) 50
YAMAHA DT (speed) 50
YAMAHA DT MX (automatic) 50
YAMAHA DT MX (speed) 50
YAMAHA TY (speed) 50
YAMAHA RD MX (speed) 50
Optional we offer a preparation course 1, this preparation is a modification of the channels and the exhaust port by increasing the charts and improvement of the duct, it increases the cylinder performance. Improved piston and bottom skirt is also included in the amendment. Allow a little extra time for this preparation!
Reference: 36 1806
Do not forget to change at each reassembly.
Reference: 35 5138
Ideal in case of loss of compression to restore your high engine to new.
Reference: 34 4262
Ideal in case of compression losses to change every 8000 km!
Reference: 11 3056B
A top-of-the-range seal pack for leak-free winding - change every time you wind it up.
Reference: 38 3470
Ideal to accompany a kit Ø44 to 45mm on your YAMAHA DT, MX, ... Air cooling!