
Reference: 216.0101
POLINI exhaust pipe for SACHS, ZUNDAPP, MINARELLI P4 & P6
The POLINI exhaust tube for your old mopeds has gearbox.
Banner
Here is the complete kit from POLINI for enthusiasts of old SACHS motorcycles. Delivered 100% complete as presented, it will allow you to refurbish your high engine efficiently. POLINI offers a high quality set both in terms of the materials used and the finish of the transfer ducts, exhaust .... This kit will offer a lot of performance both in torque and in high revs. 39.6mm stroke version. Photo and more complete description to come.
As an option we offer a stage 1 preparation, this preparation is a modification of the channels and the exhaust port by increasing the diagrams and improving the duct, it increases the performance of the cylinder. An improvement to the piston and the bottom of the skirt is also included in this modification. Allow a little extra time for this preparation!
Specific References
Reference: 216.0101
The POLINI exhaust tube for your old mopeds has gearbox.
Reference: 215.0190
An ideal intake pipe because it can take a lot of carburetors and is changeable!
Reference: 271.0003
Piston pin Ø14mm for engine THOR or S6000 on SACH.
Reference: 26105.00
Very torquey, robust and powerful kit for FLANDRIA 50cc 2T.
Reference: 003100
Very torquey, robust and powerful kit for ZUNDAPP!
Reference: 148.6002
The POLINI 6000 series kit reproduced for enthusiasts! For 44mm stroke. Have
Reference: 64445.00
A high-performance and full high special range for motor SACHS 503 and 504 in axis of 12mm with 4 transfers with a short stroke crankshaft.
Reference: 64262.00
A high-performance high-end special engine for SACHS 503 and 504 in axis of 14mm with 4 transfers crankshaft long race.
Reference: 003800/1
Very high quality 80cc kit, complete with valves and pipe for period MORINI engines!
Reference: 007100
ZUNDAPP is very robust and powerful!
Reference: 020000/1
The ATHENA cylinder, piston, cylinder head, Ø48mm kit for SACHS CORSA LUNGA 50.
Reference: 30122.00
Kit very torquey, robust and powerful for GUZZI DINGO 50cc 2T.
Reference: 54272.00
Piston cylinder for FBM engine, FBM for FABRICA BOLOGNESE MOTOCICLI was the association of MINARELLI and MORINI!
Reference: 53498.00
The very last parmakit for 42mm stroke on MINARELLI P6 engine.
Reference: 85438.00
A 70cc kit for ZUNDAPP air cooling for miniterm engines.
Reference: 020306435
Very good little aluminum kit for MORINI M1 engine, M101, M1ES, M1K ... 50 2T!
Reference: 021700
The cylinder kit, piston, cylinder head, Ø48mm ATHENA for P4R, MACAL, MALAGUTI FIFTY ....
Reference: 64432.00
A complete high-performance high-end engine special for SACHS 503 and 504 with a 14mm axle with 2 transfers with a long stroke crankshaft.
Reference: 074000/1
Very good 70cc kit for SACHS integrated cylinder head! Available with or without intake pipe.