Reference: S410000304002
Clips, piston pin rushes ATHENA in Ø of axis 12mm Type G d.1mm
The ATHENA clips of good quality for 12mm axles with 1mm diameter piston groove!
Banner
For lovers of old-performance machines we present this kit MINARELLI P4 and P6, one of the few new kits still manufactured for these engines. ATHENA in the 1990s bought the EUROCILINDRO group, it therefore continue to market the former high grade EUROCILINDRO with new generations of machines! This kit offers true performance, its diameter is 42mm and its 60cc engine.
This cylinder has very good intake and exhaust diagrams with 5 admission transfers the main back and an integrated internal lubrication. A very specific set of unique performance. Comes with intake pipe diameter Ø20mm X 24mm to mount a carburettor PHBG 20 or 21mm advised.
The cylinder head is a large volume model, it has a tapered high compression combustion chamber polished finish. The piston is also a top model, Version METEOR. With slight preparation has its base and two lubrication holes in the rear upper level. Unique, it is in mono segment to allow the highest regimes, this segment is obviously as 90% of former kits L.
We hope to make happy in marketing this type of absolutely rare and special pieces! The attachment of the intake pipe is made by 2 screws internal Ø5mm not included, mounting distance 50mm! For aguéries preparers, nothing will prevent you ask an intake pipe 4 fixing screws between axis 30 X 45mm, 4 holes are pre-drilled, simply re-drilling and tapping! Why not ask a true flexible pipe ... To ask a good result in 25 or 26mm carburetor! The minarelli am6 and various new DERBI had better behave themselves facing this monster of power ...
We advise to accompany this kit with at least: 21mm carburetor, candle B9 or B10, ignition taking turns, racing exhaust, connecting rod and crankshaft bearings reinforced, motor racing 100% synthetic oil ...
So pack contains:
Aluminum master cylinder 60cc Ø42mm
-Culasse Large volume conical trunk room high compression polished finish
-piston Mono segment L Ø42mm with specific lubrication
Axis-piston Ø12mm X 35mm
Piston -Clips G reinforced
-Segment L Ø42mm
-pack Joined complete engine
Admission -Pipe Ø20mm X 24mm
-Autocollant ...
Itself on:
2T Minarelli P4 / P4 SPORT 50
Minarelli MOTORE P4R
Testi MILITAR 50
Motron GL4 FLASH 50
2T Minarelli P6 RADIAL CROMATO
Reference: S410000304002
The ATHENA clips of good quality for 12mm axles with 1mm diameter piston groove!
Reference: 020005
Ideal for the installation of a 19 to 21mm PHBG carburetor on your old moped with MINARELLI P4, P6, BETA, MACAL ... 50mm center distance.
Reference: 010002/1.B
The high-end replacement piston ATHENA Racing for Ø42mm kits on MINARELLI P4, P6!
Reference: 010504/1
Cylinder high quality for high engine kit 60cc ATHENA Racing in 42mm diameter.
Reference: 004416/R
Premium segment for the maintenance of your 60cc kit 42mm diameter and increase your engine compression!
Reference: 007100
ZUNDAPP is very robust and powerful!
Reference: 148.6008
The POLINI 6000 series kit reproduced for enthusiasts! For 39.6mm stroke.
Reference: 85465.00
kit Ø45mm 70cc for ZUNDAP 50 air cooling, admission without valves on cylinder.
Reference: 012002435
A complete set of quality. Guaranteed performance!
Reference: 64425.00
A high-performance high-end special engine for SACHS 503 and 504 in axis of 12mm with 2 transfers with a long stroke crankshaft.
Reference: 42115.00
Very torquey, robust and powerful kit for KREIDLER FLORET HP 4,8.
Reference: 42320.00
A complete high-performance high-end engine special for KREIDLER RS SPORT 50.
Reference: 64445.00
A high-performance and full high special range for motor SACHS 503 and 504 in axis of 12mm with 4 transfers with a short stroke crankshaft.
Reference: 003800
80cc kit of very high quality, complete with valves and pipe for motorization MORINI era!
Reference: 25104.00
PARMAKIT 80cc special kit for old FANTIC CABALLERO. 48X48mm studs.
Reference: 64168.00
A high-performance and full high special range for motor SACHS 503 and 504 in axis of 14mm with 4 transfers with a long-stroke crankshaft.
Reference: 85306.00
The piston-cylinder without cylinder head 70cc for ZUNDAPP air cooling for miniterm engines.
Reference: 85105.00
Kit offering a great increase in torque and power to your ZUNDAPP 603 engine.
Reference: 54272.00
Piston cylinder for FBM engine, FBM for FABRICA BOLOGNESE MOTOCICLI was the association of MINARELLI and MORINI!
Reference: 42307.00
A high-performance and full high special range for motor KREIDLER RS 50 SUPER.
Reference: 85120.00
The only kit available on the market for ZUNDAPP liquid cooling SUPER 50 LC, KS50LC ...!