
Reference: 26105.00
Cylinder - piston without cylinder head 65cc Ø44mm PARMAKIT aluminum for FLANDRIA 50cc
Very torquey, robust and powerful kit for FLANDRIA 50cc 2T.
Banner
A complete set of rare and high-performance parts for older KREIDLER RS SPORT 50 motorbikes. This high-quality aluminum cylinder comes straight from the Made in Italy moulds! It is equipped with 4 large admission transfers with an internal lubrication system in the cylinder and in accordance with its piston. The architecture and finish are of course excellent and top of the range. A huge bar exhaust and high diagrams make this power unit a powerful asset for your 2 wheels! The piston that accompanies this cylinder is a two-segment model from VERTEX, therefore of high quality. With its L-shaped segments it will offer you torque. It is also delivered with its supercharged cylinder head which will allow you to make the most of your engine while starting afresh. Clearly, an excellent quality / price / performance ratio to bring your KREIDLER back to life.
We recommend to accompany this kit with at least a 17mm carburetor, cold racing spark plug, 100% synthetic racing engine oil, bearings and reinforced crankshaft, racing exhaust... .
This pack contains:
- Aluminum cylinder
-Mono-segment piston
-1 segment
-Piston pin Ø12
-G piston clips
-Cylinder head
-Engine gasket pack
-Notice
-Sticker
As an option we offer you a stage 1 preparation, this preparation is a modification of the channels and the exhaust port by increasing the diagrams and improving the duct, it increases the performance of the cylinder. An improvement of the piston and the lower skirts is also included in this modification. Count a little extra time for this preparation!
Reference: 26105.00
Very torquey, robust and powerful kit for FLANDRIA 50cc 2T.
Reference: 003100
Very torquey, robust and powerful kit for ZUNDAPP!
Reference: 148.6002
The POLINI 6000 series kit reproduced for enthusiasts! For 44mm stroke. Have
Reference: 64445.00
A high-performance and full high special range for motor SACHS 503 and 504 in axis of 12mm with 4 transfers with a short stroke crankshaft.
Reference: 64262.00
A high-performance high-end special engine for SACHS 503 and 504 in axis of 14mm with 4 transfers crankshaft long race.
Reference: 003800/1
Very high quality 80cc kit, complete with valves and pipe for period MORINI engines!
Reference: 007100
ZUNDAPP is very robust and powerful!
Reference: 020000/1
The ATHENA cylinder, piston, cylinder head, Ø48mm kit for SACHS CORSA LUNGA 50.
Reference: 30122.00
Kit very torquey, robust and powerful for GUZZI DINGO 50cc 2T.
Reference: 54272.00
Piston cylinder for FBM engine, FBM for FABRICA BOLOGNESE MOTOCICLI was the association of MINARELLI and MORINI!
Reference: 53498.00
The very last parmakit for 42mm stroke on MINARELLI P6 engine.
Reference: 85438.00
A 70cc kit for ZUNDAPP air cooling for miniterm engines.
Reference: 020306435
Very good little aluminum kit for MORINI M1 engine, M101, M1ES, M1K ... 50 2T!
Reference: 021700
The cylinder kit, piston, cylinder head, Ø48mm ATHENA for P4R, MACAL, MALAGUTI FIFTY ....
Reference: 64432.00
A complete high-performance high-end engine special for SACHS 503 and 504 with a 14mm axle with 2 transfers with a long stroke crankshaft.
Reference: 074000/1
Very good 70cc kit for SACHS integrated cylinder head! Available with or without intake pipe.