Reference: 020000
Kit 80cc Ø48mm ATHENA RACING aluminum for Sachs CORSA LUNGA 50 14mm axle
The ATHENA cylinder, piston, cylinder head, Ø48mm kit for SACHS CORSA LUNGA 50.
Banner
A complete set of rare and high-performance parts for older KREIDLER RS SPORT 50 motorbikes. This high-quality aluminum cylinder comes straight from the Made in Italy moulds! It is equipped with 4 large admission transfers with an internal lubrication system in the cylinder and in accordance with its piston. The architecture and finish are of course excellent and top of the range. A huge bar exhaust and high diagrams make this power unit a powerful asset for your 2 wheels! The piston that accompanies this cylinder is a two-segment model from VERTEX, therefore of high quality. With its L-shaped segments it will offer you torque. It is also delivered with its supercharged cylinder head which will allow you to make the most of your engine while starting afresh. Clearly, an excellent quality / price / performance ratio to bring your KREIDLER back to life.
We recommend to accompany this kit with at least a 17mm carburetor, cold racing spark plug, 100% synthetic racing engine oil, bearings and reinforced crankshaft, racing exhaust... .
This pack contains:
- Aluminum cylinder
-Mono-segment piston
-1 segment
-Piston pin Ø12
-G piston clips
-Cylinder head
-Engine gasket pack
-Notice
-Sticker
As an option we offer you a stage 1 preparation, this preparation is a modification of the channels and the exhaust port by increasing the diagrams and improving the duct, it increases the performance of the cylinder. An improvement of the piston and the lower skirts is also included in this modification. Count a little extra time for this preparation!
Reference: 020000
The ATHENA cylinder, piston, cylinder head, Ø48mm kit for SACHS CORSA LUNGA 50.
Reference: 26105.00
Very torquey, robust and powerful kit for FLANDRIA 50cc 2T.
Reference: 25104.00
PARMAKIT 80cc special kit for old FANTIC CABALLERO. 48X48mm studs.
Reference: 85105.00
Kit offering a great increase in torque and power to your ZUNDAPP 603 engine.
Reference: 64445.00
A high-performance and full high special range for motor SACHS 503 and 504 in axis of 12mm with 4 transfers with a short stroke crankshaft.
Reference: 64263.00
A high-performance high-end special engine for SACHS 503 and 504 in axis of 14mm with 2 transfers with a long stroke crankshaft.
Reference: 64425.00
A high-performance high-end special engine for SACHS 503 and 504 in axis of 12mm with 2 transfers with a long stroke crankshaft.
Reference: 003100
Very torquey, robust and powerful kit for ZUNDAPP!
Reference: 64165.00
A high-performance and full high special range for motor SACHS 503 and 504 in axis of 12 with 4 transfers with a long stroke crankshaft.
Reference: 073800
The most powerful kit on the market for SACHS has cylinder head connected to the cylinder! Full version with clamshells!
Reference: CI.49.650.G
Very high performance kit for MORINI M1 / M 101 engine!
Reference: 30122.00
Kit very torquey, robust and powerful for GUZZI DINGO 50cc 2T.
Reference: 148.6008
The POLINI 6000 series kit reproduced for enthusiasts! For 39.6mm stroke.
Reference: 85465.00
kit Ø45mm 70cc for ZUNDAP 50 air cooling, admission without valves on cylinder.
Reference: 85215.00
The high engine complete with cylinder head, 70cc, for ZUNDAPP air cooling, big model flaps!
Reference: 007100
ZUNDAPP is very robust and powerful!