Reference: 003800/1
Cylinder - piston without cylinder head 80cc Ø48mm ATHENA aluminum MORINI G30, S5, KTM, MALAGUTI FIFTY FULL CX 50, GAC
Very high quality 80cc kit, complete with valves and pipe for period MORINI engines!
Banner
Part which has become very rare, here is a kit for KREIDLER FLORET HP 4.8 engines. This high performance kit from PARMAKIT is very robust, powerful and torquey! It consists of a nicasil-treated aluminum cylinder, a single-segment vertex piston!
The diagrams, the compression ratio, the conduits ... Everything is studied to optenir an excellent engine performance.
It is assembled in combination with the original cylinder head! We recommend a 17.5 to 21mm carburetor and a sport exhaust!
As an option we offer a stage 1 preparation, this preparation is a modification of the channels and the exhaust port by increasing the diagrams and improving the duct, it increases the performance of the cylinder. An improvement to the piston and the bottom of the skirt is also included in this modification. Allow a little extra time for this preparation!
Mounts on:
KREIDLER FLORET HP 4.8
Reference: 003800/1
Very high quality 80cc kit, complete with valves and pipe for period MORINI engines!
Reference: 64262.00
A high-performance high-end special engine for SACHS 503 and 504 in axis of 14mm with 4 transfers crankshaft long race.
Reference: 074000/1
Very good 70cc kit for SACHS integrated cylinder head! Available with or without intake pipe.
Reference: 53490.00
A high-performance top special range 42mm stroke motor Minarelli P6! Exhaust mounting by 3 screws for RADIAL SYSTEM.
Reference: 25104.00
PARMAKIT 80cc special kit for old FANTIC CABALLERO. 48X48mm studs.
Reference: 003800
80cc kit of very high quality, complete with valves and pipe for motorization MORINI era!
Reference: 42105.00
Kit very torquey, robust and powerful for KREIDLER FLORET HP 5.2.
Reference: 42320.00
A complete high-performance high-end engine special for KREIDLER RS SPORT 50.
Reference: 85306.00
The piston-cylinder without cylinder head 70cc for ZUNDAPP air cooling for miniterm engines.
Reference: 85465.00
kit Ø45mm 70cc for ZUNDAP 50 air cooling, admission without valves on cylinder.
Reference: 85206.00
The piston-cylinder without cylinder head 70cc for ZUNDAPP air cooling as the CS50, KS50 ...
Reference: 64430.00
A high-performance and full high special range for motor SACHS 503 and 504 in axis of 12mm with 2 transfers with a long stroke crankshaft.
Reference: 64425.00
A high-performance high-end special engine for SACHS 503 and 504 in axis of 12mm with 2 transfers with a long stroke crankshaft.
Reference: 012002435
A complete set of quality. Guaranteed performance!
Reference: 003100
Very torquey, robust and powerful kit for ZUNDAPP!
Reference: 148.6002
The POLINI 6000 series kit reproduced for enthusiasts! For 44mm stroke. Have