Reference: 42204.03
Pack gasket kit / high engine Ø44mm 70cc PARMAKIT on KREIDLER FLORET HP 5.2
Pack of complete seal for kit 70cc Ø44mm PARMAKIT aluminum for KREIDLER FLORET HP 5,2.
Banner
Part become very rare, here is a kit for engines KREIDLER FLORET HP 5.2. This high performance kit from PARMAKIT is very robust, powerful and torquey!
It consists of a nicasil treated aluminum cylinder, a single-segment vertex piston! Diagrams, compression ratio, ducts ...
Everything is designed to achieve excellent engine performance. It mounts in combination with the original breech!
We recommend a 17.5 to 21mm carburetor and a sport exhaust!
The diameter of the cylinder is Ø44mm, actual displacement 69cc, axis of the piston is Ø14mm, 2 transfers.
Optionally we offer a stage 1 preparation, this preparation is a modification of the channels and exhaust light by increasing the diagrams and improving the pipe, it increases the performance of the cylinder. An improvement of the piston and skirt stocking is also included in this modification. Allow a little extra time for this preparation!
Reference: 42204.03
Pack of complete seal for kit 70cc Ø44mm PARMAKIT aluminum for KREIDLER FLORET HP 5,2.
Reference: 42115.02
The replacement piston by VERTEX for kits 70cc Ø44mm PARMAKIT aluminum for KREIDLER FLORET HP 5.2.
Reference: 42115.16
Top-of-the-range Ø44mm x 1.5mm PARMAKIT segment to refurbish and increase your KREIDLER FLORET HP 5.2 engine compression!
Reference: 64168.00
A high-performance and full high special range for motor SACHS 503 and 504 in axis of 14mm with 4 transfers with a long-stroke crankshaft.
Reference: 53490.00
A high-performance top special range 42mm stroke motor Minarelli P6! Exhaust mounting by 3 screws for RADIAL SYSTEM.
Reference: 85120.00
The only kit available on the market for ZUNDAPP liquid cooling SUPER 50 LC, KS50LC ...!
Reference: 53495.00
The latest parmakit for 44mm travel on the MINARELLI P6 engine. Delivered with its cylinder head, exhaust fixing with 3 screws (radial system).
Reference: 64263.00
A high-performance high-end special engine for SACHS 503 and 504 in axis of 14mm with 2 transfers with a long stroke crankshaft.
Reference: 30132.00
Kit very torquey, robust and powerful for GUZZI DINGO SPORT 50cc 2T.
Reference: 64266.00
A high-performance high-end special engine for SACHS 503 and 504 in axis of 12mm with 4 transfers with a long stroke crankshaft.
Reference: 85306.00
The piston-cylinder without cylinder head 70cc for ZUNDAPP air cooling for miniterm engines.
Reference: 003800/1
Very high quality 80cc kit, complete with valves and pipe for period MORINI engines!
Reference: 003100
Very torquey, robust and powerful kit for ZUNDAPP!
Reference: 007100
ZUNDAPP is very robust and powerful!
Reference: 85438.00
A 70cc kit for ZUNDAPP air cooling for miniterm engines.
Reference: 54272.00
Piston cylinder for FBM engine, FBM for FABRICA BOLOGNESE MOTOCICLI was the association of MINARELLI and MORINI!
Reference: 85465.00
kit Ø45mm 70cc for ZUNDAP 50 air cooling, admission without valves on cylinder.
Reference: 25104.00
PARMAKIT 80cc special kit for old FANTIC CABALLERO. 48X48mm studs.
Reference: 30122.00
Kit very torquey, robust and powerful for GUZZI DINGO 50cc 2T.