
Reference: 26105.00
Cylinder - piston without cylinder head 65cc Ø44mm PARMAKIT aluminum for FLANDRIA 50cc
Very torquey, robust and powerful kit for FLANDRIA 50cc 2T.
Banner
A real performance monster! Here is the ATHENA HYPER RACING kit for SACHS machines with integrated cylinder head. This kit has an excellent architecture, the cylinder is clamshell and has relatively high diagrams, the system has flaps offering more torque-based rpm and much more power in addition to a reduction in fuel consumption. The piston is uhn mono segments to allow the highest speeds! ATHENA is none other than EUROCILINDRO, the quality of the aluminum and the nicasile treatment are at the top of the top! Delivered with instructions, joints, screws, axle, segment, valves, clips ... And 2 intake pipes! One to mount a 15 or 16 SHA, the other to mount a 17.5 to 21mm in PHBG!
Mounts on :
Sachs BATAVUS 50 - Motorcycles-mopeds
Sachs CITY 50 - Motorcycles-mopeds
Sachs HERCULES PRIMA 5 50 - Motorcycles-mopeds
Sachs KARSTADT 50 - Motorcycles-mopeds
Sachs M1 50 - Motorcycles-mopeds
Sachs M2 50 - Motorcycles-mopeds
Sachs M3 50 - Motorcycles-mopeds
Sachs M4 50 - Motorcycles-mopeds
Sachs M5 50 - Motorcycles-mopeds
Sachs MX1 50 - Motorcycles-mopeds
Sachs OPTIMA 3S 50 - Motorcycles-mopeds
Sachs RIXE 50 - Motorcycles-mopeds
Sachs TORROT 50 - Motorcycles-mopeds
Reference: 26105.00
Very torquey, robust and powerful kit for FLANDRIA 50cc 2T.
Reference: 003100
Very torquey, robust and powerful kit for ZUNDAPP!
Reference: 148.6002
The POLINI 6000 series kit reproduced for enthusiasts! For 44mm stroke. Have
Reference: 64445.00
A high-performance and full high special range for motor SACHS 503 and 504 in axis of 12mm with 4 transfers with a short stroke crankshaft.
Reference: 64262.00
A high-performance high-end special engine for SACHS 503 and 504 in axis of 14mm with 4 transfers crankshaft long race.
Reference: 003800/1
Very high quality 80cc kit, complete with valves and pipe for period MORINI engines!
Reference: 007100
ZUNDAPP is very robust and powerful!
Reference: 020000/1
The ATHENA cylinder, piston, cylinder head, Ø48mm kit for SACHS CORSA LUNGA 50.
Reference: 30122.00
Kit very torquey, robust and powerful for GUZZI DINGO 50cc 2T.
Reference: 54272.00
Piston cylinder for FBM engine, FBM for FABRICA BOLOGNESE MOTOCICLI was the association of MINARELLI and MORINI!
Reference: 53498.00
The very last parmakit for 42mm stroke on MINARELLI P6 engine.
Reference: 85438.00
A 70cc kit for ZUNDAPP air cooling for miniterm engines.
Reference: 020306435
Very good little aluminum kit for MORINI M1 engine, M101, M1ES, M1K ... 50 2T!
Reference: 021700
The cylinder kit, piston, cylinder head, Ø48mm ATHENA for P4R, MACAL, MALAGUTI FIFTY ....
Reference: 64432.00
A complete high-performance high-end engine special for SACHS 503 and 504 with a 14mm axle with 2 transfers with a long stroke crankshaft.
Reference: 074000/1
Very good 70cc kit for SACHS integrated cylinder head! Available with or without intake pipe.