Reference: 020000/1
Kit 80cc Ø48mm ATHENA RACING aluminum for Sachs CORSA LUNGA 50 12mm axle
The ATHENA cylinder, piston, cylinder head, Ø48mm kit for SACHS CORSA LUNGA 50.
Banner
A complete set of rare and high-performance parts for the old SACHS RS long-stroke 503 and 504 motorbikes. This high-quality aluminum cylinder comes straight out of Made in Italy molds! It has 2 large intake transfers with a lubrication system internal to the cylinder and in accordance with its piston. The architecture and finish are of course excellent and upscale. A huge bar exhaust and high diagrams make this power unit a powerful asset for your 2 wheeler! The piston which accompanies this cylinder is a mono-segment model from VERTEX therefore of high quality. With its L-shaped segments it will offer you torque. It is also delivered with its overcompressed cylinder head which will allow you to make the best use of your engine all by starting from scratch. Clearly, an excellent quality / price / performance ratio to bring your SACHS back to life.
We recommend accompanying this kit with at least 17mm carburetion, cold racing spark plug, 100% synthetic racing engine oil, reinforced bearings and crankshaft, racing exhaust ....
This pack contains:
-Aluminum cylinder 2 transfers with bar exhaust
-Piston VERTEX mono-segment
-2 L segments Ø45mm X 1mm chromed steel
-Piston axis Ø14
-G piston clips
-Pack of engine gaskets
-Notice
-Sticker
As an option we offer you a stage 1 preparation, this preparation is a modification of the channels and the exhaust port by increasing the diagrams and improving the duct, it increases the performance of the cylinder. An improvement to the piston and the bottom of the skirt is also included in this modification. Allow a little extra time for this preparation!
Reference: 020000/1
The ATHENA cylinder, piston, cylinder head, Ø48mm kit for SACHS CORSA LUNGA 50.
Reference: 53498.00
The very last parmakit for 42mm stroke on MINARELLI P6 engine.
Reference: 85445.00
The high complete engine with cylinder head, 70cc, ZUNDAPP for air cooling, small model valves!
Reference: 168.6006
The POLINI SERIE 6000 kit reproduced for enthusiasts! For 41.6mm stroke.
Reference: 85206.00
The piston-cylinder without cylinder head 70cc for ZUNDAPP air cooling as the CS50, KS50 ...
Reference: 53488.00
A high performance high-end motor special race 44mm for Minarelli P6! Fixing the exhaust with 3 screws, for RADIAL SYSTEM.
Reference: 073600
80cc kit with inclined admission, more practical for certain carburetion assemblies!
Reference: 26105.00
Very torquey, robust and powerful kit for FLANDRIA 50cc 2T.
Reference: 53495.00
The latest parmakit for 44mm travel on the MINARELLI P6 engine. Delivered with its cylinder head, exhaust fixing with 3 screws (radial system).
Reference: 148.6008
The POLINI 6000 series kit reproduced for enthusiasts! For 39.6mm stroke.
Reference: 42105.00
Kit very torquey, robust and powerful for KREIDLER FLORET HP 5.2.
Reference: 64262.00
A high-performance high-end special engine for SACHS 503 and 504 in axis of 14mm with 4 transfers crankshaft long race.
Reference: 85307.00
A 70cc kit for ZUNDAPP air cooling for miniterm engines.
Reference: 133.6005
The kit POLINI SERIE 6000 reproduced for the passionate ones! For 42mm stroke.
Reference: 85465.00
kit Ø45mm 70cc for ZUNDAP 50 air cooling, admission without valves on cylinder.
Reference: 64168.00
A high-performance and full high special range for motor SACHS 503 and 504 in axis of 14mm with 4 transfers with a long-stroke crankshaft.