Reference: 213.0522
Lamella of valves POLINI carbon 0,35mm for vertical minarelli (booster rocket, bw's)
Ideal for improving your performance.
Banner
Here is a small 50cc RACING kit from the house POLINI MOTORI, this cast iron model diameter 40mm will bring you additional performance in relation to the origin and it will preserve the solidity, reliability and this for a low price!
It is ideal to start over again by improving its acceleration and top speed, POLINI has greatly worked this high engine, the channels and transfers to the base are improved (an alignment to the crankcase can be the good thing to take again from the power).
The piston is a reinforced model with two fine segments including a domed chrome for the top of the piston, the cylinder head is a high compression chamber model frustoconical polished finish. In addition, POLINI delivers this kit with a slat of carbon valves to fully exploit your power regime.
To further improve the quality, POLINI has to pass its cylinder head in O-ring and the top of the cylinder enters the machining cylinder head for a better holding of the latter and also to have a combustion chamber perfectly aligned with the cylinder.
Optionally we offer a stage 1 preparation, this preparation is a modification of the channels and exhaust light by increasing the diagrams and improving the pipe, it increases the performance of the cylinder. An improvement of the piston and skirt stocking is also included in this modification. Allow a little extra time for this preparation!
Mounts on :
APRILIA AMICO
APRILIA SR (before 1993 only)
FANTIC BIG WHEEL
GARELLI PONY
GARELLI SR
ITALJET BAZOOKA
ITALJET PISTA
ITALJET REPORTER
ITALJET SCOOP
ITALJET YANKEE
ITALJET ASCOT
ITALJET ASTRA
LEM FLASH
LEM GHIBLI
LEM TORNADO
LEM TORNADO SS1
KOTIR SR
KTM CHRONO
MBK BOOSTER
MBK BOOSTER NAKED
MBK BOOSTER ROCKET
MBK BOOSTER NEXT GENERATION (NG)
MBK BOOSTER CW
MBK BOOSTER SPIRIT
MBK STUNT
MBK TARGET
MBK BOOSTER TRACK
YAMAHA BW'S
YAMAHA BW'S NG
YAMAHA BW'S ORIGINAL
YAMAHA BW'S NAKED
YAMAHA CRZ
YAMAHA CT
YAMAHA SLIDER
YAMAHA SPY
YAMAHA ZUMA
And many other models ...
Reference: 213.0522
Ideal for improving your performance.
Reference: 252.0002
The POLINI pot seal for your booster, bw's, spirit, next-generation, rocket ...
Reference: 317.0005
Set of 2 M6 studs that can be used for many applications.
Reference: 272.0120
POLINI replacement clips for 10mm piston pins.
Reference: 204.0720
The spare piston for your cast iron 50cc kits on booster, bw's, spirit ...
Reference: 209.0227
The pack attached for kit POLINI cast iron 50cc on vertical minarelli, booster ...
Reference: 211.0255
The special breech, only for kits POLINI cast iron 50cc on minarelli, vertical, booster, bw's ...
Reference: 206.0280
The segment Ø40mm by thickness 1.26mm trapezoidal pin down, standard for kit 50cc POLINI on minarelli vertical, horizontal ...
Reference: 206.0281
The Ø40mm segment in chromed steel by 1.26mm trapezoidal thickness lug down, standard for 50cc POLINI kit on vertical, horizontal minarelli ...
Reference: 271.0243
The Ø10mm piston pin for your POLINI 50cc kit.