Reference: 329.0614/GT
Pack gasket kit 50cc Ø40,2mm FURYTECH RS10 GT aluminum for minarelli vertical (booster rocket, bw's ...)
A very complete joint pouch of high quality at low cost, ideal for winding without leaking.
Banner
Already available from us, here is the latest kit from FURYTECH.
This 50cc kit is reserved for demanding users who want a high performance engine while remaining in the legal capacity of 50cc and preserving strength and torque!
The least we can say is that FURYTECH has not been idle!
They installed a new, more solid piston fitted with segments with a thickness of 0.8mm and convex to reduce friction as much as possible, two in number (two-segment) in order to preserve torque and strength.
The cylinder is in aluminum with a very high-end Nicasil treatment, the finish is excellent, for more performance, they have opted for a booster exhaust (in 3 parts).
The exhaust duct is obviously round and unbridled, 6 intake transfers are present to offer better sweeping and better feed your machine!
FURYTECH wanted to stay on a standard type intake, just widened in order to preserve solidity. We have often known on the cylinders very worked on the level of the admission of the breaks, seizures, pre-tightening on the back of the cylinder / piston especially on the vertical air MINARELLI engines which heat enormously.
This is also why big brands like MALOSSI still work with this type of admission.
You will not need to align the crankcases to the cylinder except for the rear transfer if desired.
Even at the level of the cylinder head, the evolution is present, the high compression chamber is frustoconical and in polished finish, the aluminum used is of good quality and allows a good heat exchange, you will appreciate especially as on all the models Premium for vertical O-ring tight fitting, FURYTECH also supplies you with a standard head gasket if your squish is too tight or you don't trust O-rings!
The cylinder also comes with 3 base gaskets to make the squish. To summarize, this cylinder also has in-between diagrams, which allows you power while preserving torque, with its thin two-segments, this allows on the one hand high speeds with less friction but preserves torque. , this cylinder is really a nice compromise which proves once again that FURYTECH = SERIEUSE & EVOLUTION BRAND.
We would just have liked to have a cylinder head which allows the assembly of a long base spark plug but shims exist at DOPPLER for the assembly.
We recommend with this thermal unit RS10 GT :
-Racing exhaust
-Lighter dimmer settings
-Carburation from Ø19 to 21mm with racing valves
-Clutch which hangs later than the origin
-Cold racing candle short base or long base with DOPPLER wedge
-Reinforced crankshaft
-Rear transfer aligned with the crankcase if desired.
As an option we offer you a stage 1 preparation, this preparation is a modification of the channels and the exhaust port by increasing the diagrams and improving the duct, it increases the performance of the cylinder. An improvement to the piston and the bottom of the skirt is also included in this modification. Allow a little extra time for this preparation!
The pack consists of:
-Piston bi-segments Ø40mm
-2 thin segments 0.8mm
-10mm axle
-2 crab piston clips
-Cylinder aluminum 6 transfers of intake exhaust with boosters
-3 base gaskets
-O-ring cylinder head gasket
-Standard cylinder head gasket
-Muffler gasket
-Seal valves
-Black high compression cylinder head
-Notice
Mounts on:
APRILIA AMICO
APRILIA SR (before 1993 only)
FANTIC BIG WHEEL
CARELLI PONY
GARELLI SR
ITALJET BAZOOKA
ITALJET PISTA
ITALJET REPORTER
ITALJET SCOOP
ITALJET YANKEE
ITALJET ASCOT
ITALJET ASTRA
LEM FLASH
LEM GHIBLI
LEM TORNADO
LEM TORNADO SS1
KOTIR SR
KTM CHRONO
MBK BOOSTER
MBK BOOSTER NAKED
MBK BOOSTER ROCKET
MBK BOOSTER NEXT GENERATION (NG)
MBK BOOSTER CW
MBK BOOSTER SPIRIT
MBK STUNT
MBK TARGET
MBK BOOSTER TRACK
YAMAHA BW'S
YAMAHA BW'S NG
YAMAHA BW'S ORIGINAL
YAMAHA BW'S NAKED
YAMAHA CRZ
YAMAHA CT
YAMAHA SLIDER
YAMAHA SPY
YAMAHA ZUMA
And many other models ...
Reference: 329.0614/GT
A very complete joint pouch of high quality at low cost, ideal for winding without leaking.
Reference: 429.0614/GT
Here is the alternative segment of game for your high RS10 engines FURYTECH GT twin-engine segment on MINARELLI Vertical!
Reference: 229.0614/GT
Ideal in case of loss of compression or just for a refurbishment.
Reference: 31 8565
For more performance and a strong engine! This 50cc kit will be very good to equip your scooter with Minarelli / Yamaha Vertical Air low engine.
Reference: 070000/1
A high engine full of high quality. Ideal to improve your performance while preserving the 50cc engine capacity.
Reference: 482925
Quality cylinder / piston, DOPPLER SPORT with booster escapement and more powerful diagrams!
Reference: KT00096
A 50cc kit without solid breech, reliable and efficient, installs without problem with the original cylinder head.
Reference: 482032
The cheapest type kit from the market with a quality and a correct finish.
Reference: 166.0092
A very good high engine that brings a very good performance by preserving the strength and legal displacement of 50cc.
Reference: 5WWWE13A1000
A cylinder - piston 50cc without cylinder head, genuine origin very high quality.
Reference: 31 6901
An excellent high engine which brings a very good performance gain, increased strength and the legal displacement of 50cc.
Reference: 01131140
The high complete engine with cylinder head AIRSAL SPORT, rectangular exhaust, bi segment ...
Reference: 031000
A small kit at a low price, nice, solid and a little more efficient than the original.
Reference: 31 6906
A kit but without cylinder head that mounts with original cylinder head for a low price while keeping very good performance.
Reference: 820
A small aluminum kit type original improved to restore your vertical minarelli engine.
Reference: 76505.00
A very good high engine which brings a very good performance gain while preserving the solidity and the legal displacement of 50cc.
Reference: 477549
A very good little kit that will save you a lot in performance.
Reference: 214655
A very good little cylinder that will earn you a lot of performance sold without cylinder head to save money. But mounts very well on the breech of origin.
Reference: H02138540
A very solid original type kit cast.