Reference: 31304.02
Bi piston segment PARMAKIT Ø39mm for kit 50cc motorbike HONDA MT 50, MT 50 and MTX 50 air cooling
Ideal for maintaining your kits 50 PARMAKIT 39mm diameter case of loss of compression or wear on your bike HONDA.
Banner
Here is the kit high for HONDA MB, MT and MTX 50 air-cooled. A real Made in Italy high end compared to originally bring you more torque and top speed on your motorcycle without neglecting the reliability of your 2 wheels.
The cylinder is an aluminum model with a nikasil coating quality. The channels, finish ... everything is excellent! With 5 transfers, 2 on each side and 1 on the specific back. Admission is extended to improve and optimize the filling.
The fixing distance for the collector / intake pipe is 61 X 40 mm. The attachment to the exhaust is by 2 Ø8mm dowels, this one is a model revised upwards, enlarged and oval shape. The piston is a special two-segment version with low domed cap intended to be accompanied with the original cylinder head and increasing at the same time the pre-compression of the engine! Model preparation and opening of the rear apron to improve scanning and effective lateral nipples.
Accompanied by 2 segments chrome steel 1.5mm thickness, reinforced kind crab clips and Ø12mm axis. Clearly, a cylinder / piston high performance that offers durability, reliability and performance both in low revs (torque) that high speeds (top speed)! A jewel of at PARMAKIT.
contains:
Master cylinder 39mm diameter aluminum 5 transfers with large oval exhaust
-piston Two-segment Ø39mm with preparation on the rear apron and side nipples
-Two Ø39mm X 1,5mm thickness segments in chromium steels
Axis-piston of Ø12mm
-Clips, Axis rushes like crab strengthened
-pack Engine seals
-Notice
-Autocollant ...
Optional we offer a preparation course 1, this preparation is a modification of the channels and the exhaust port by increasing the charts and improvement of the duct, it increases the cylinder performance. Improved piston and bottom skirt is also included in the amendment. Allow a little extra time for this preparation!
Reference: 31304.02
Ideal for maintaining your kits 50 PARMAKIT 39mm diameter case of loss of compression or wear on your bike HONDA.
Reference: 31304.16
In case of wear, compression loss ... on your kit 50cc in diameter 39mm!
Reference: 31304.03
A quality engine gaskets pack for a perfect seal, compression in your kit 50 d.39mm.
Reference: RRD-50-139FMB
A good original 50cc kit to repair your 139FMB-B engine at a lower cost.
Reference: CIL-726
A kit cast iron 50cc better than the original for your old motorcycles HONDA 50cc liquid-cooled.
Reference: 007400
High two-segment engine very solid and efficient! Ideal for quality refurbishment!