Reference: 81200303
Reinforced BIDALOT needle cage Ø12X16X16mm minarelli am6, 103, DERBI, PIAGGIO...
High-end needle cage to be changed every 5,000 km, ideal for the biggest kits on the market.
Banner
Here are the top engine kit limited reissue of the house BIDALOT for MBK 51, motobecane av10, this latest version of the brand is the reissue of 1994/1995-type G2 Cross with single exhaust pipe, cylinder 5 transfers including 2 side expanded based on the couple instead of the top motor speed G2 kind that it is based on high revs.
A cage has needle also provides Ø12mm X 16mm X 16mm, you can mount it easily with a crankshaft of race origin 41,80mm, if you want to ask a competition crankshaft race 39,70mm you must adapt if the cage has needle needed as well as machining of the cylinder head gasket plane.
The latter is also of excellent quality with optimized liquid cooling and a high compression combustion chamber. The exhaust outlet is machined to use the ball Ø38mm to pose a competition exhaust, though thanks to adapter set Accessory link, you can ask any conventional exhaust. In addition, a set of 3 joints of base plate with different thicknesses is also provided to make your squish to perfection.
Clearly you can see, a real top quality engine limited edition fine finish machining and delivered 100% complete as presented.
We recommend this high engine with: reinforced crankshaft 41,8mm standard race with special cage for the axis of 12mm or shorter BIDALOT OPEN 39,7mm (requires little machining the cylinder head), original casings BIDALOT prepared or housing reinforced bearings, cold candle racing long base, Ø15 has 19mm carburetor according configuration, variable ignition advance was for the best, valves racing with appropriate thickness of lamella, 100% synthetic racing oil only, racing variation (high speed) perfectly tuned ... .
contains:
Master cylinder racing aluminum 5 transfers liquid-cooled 50cc Ø40mm
-Culasse Racing aluminum high pressure liquid cooled
-piston Cast racing BIDALOT
-Segment Cast chrome end 40mm x 1mm thick
X2 crab piston clips reinforced 1mm thick
Axis-piston Ø12mm X 32mm
-Cage Reinforced needle Ø12 X 16 X 16mm
-Rondelle + Copper cylinder head bolts
-Joints Yoke rings
-3 Base seals thicknesses 0,15 / 0,25 and 0,40mm
-Sticker
-Notice Complete information and installation
Optional we offer a preparation course 1, this preparation is a modification of the exhaust port by increasing the charts and improvement of the duct, it increases the cylinder performance. Improved bottom skirt is also included in the amendment. Allow a little extra time for this preparation!
Reference: 81200303
High-end needle cage to be changed every 5,000 km, ideal for the biggest kits on the market.
Reference: 11503118
Quality seal with choice of thicknesses to make your squish.
Reference: 83000702
High-end and useful seal for refurbishing your engine sealing.
Reference: 83004525
The most upscale of Viton O-ring.
Reference: 11360118
Clips very simple to install but less well known for extreme conditions... .
Reference: 11340118
A very good quality axle, treated, which will be perfect in case of breakage or loss of your old axle.
Reference: 11337520
Spare piston kits for G1, G2, G3, European air and liquid on mopeds Peugeot 103, Fox, Honda wallaroo, MBK 51 ... AV10.
Reference: 11501117
Base gasket specific to G1 / G2 OPEN Racing 2013 crankcases / cylinders.
Reference: 11200213
Racing cylinder head BIDALOT G2, G3, Europe high compression model MBK 51, AV10.
Reference: 02141139
A low cost liquid cooling kit for your MBK 51, AV10 engine.
Reference: 504019
The most powerful kit in 50cc liquid cooling for your MBK 51.
Reference: 475522
The complete kit for MBK 51 liquid!
Reference: 009400
A high performance 50cc engine and solid!
Reference: 31 5477
The famous MALOSSI G2 REPLICA kit for MBK 51 liquid cooling, solid, torquey and powerful!
Reference: 4107
Ideal for an original type refurbishment at a low price.
Reference: 480961
A very good quality aluminum kit with 3 transfers to have a slight performance gain at a low price.
Reference: HM36
Top G2B MVT competition engine.
Reference: 032101
A kit almost identical to the origin but at half the price. One way to get your AV10 back up and running without spending too much.
Reference: 02140739
A very good little kit 50cc 6 transfers of admission and mono-segment for more performances than the origin!
Reference: 063000
Out of production!
Reference: 170880
Very good quality 50cc kit, ideal to start afresh with more performance!
Reference: HM38
Top G2A MVT competition engine.
Reference: 134.0302
Now out of production!
Reference: 134.0316
The famous kit POLINI MBK 51 with exhaust liquid W. The best 50cc lc with MALOSSI!
Reference: 11000213
Out of production.