Here are the top engine kit limited reissue of the house BIDALOT for MBK 51, motobecane av10, this latest version of the brand is the reissue of 1994/1995-type G2 Cross with single exhaust pipe, cylinder 5 transfers including 2 side expanded based on the couple instead of the top motor speed G2 kind that it is based on high revs.
A cage has needle also provides Ø12mm X 16mm X 16mm, you can mount it easily with a crankshaft of race origin 41,80mm, if you want to ask a competition crankshaft race 39,70mm you must adapt if the cage has needle needed as well as machining of the cylinder head gasket plane.
The latter is also of excellent quality with optimized liquid cooling and a high compression combustion chamber. The exhaust outlet is machined to use the ball Ø38mm to pose a competition exhaust, though thanks to adapter set Accessory link, you can ask any conventional exhaust. In addition, a set of 3 joints of base plate with different thicknesses is also provided to make your squish to perfection.
Clearly you can see, a real top quality engine limited edition fine finish machining and delivered 100% complete as presented.
We recommend this high engine with: reinforced crankshaft 41,8mm standard race with special cage for the axis of 12mm or shorter BIDALOT OPEN 39,7mm (requires little machining the cylinder head), original casings BIDALOT prepared or housing reinforced bearings, cold candle racing long base, Ø15 has 19mm carburetor according configuration, variable ignition advance was for the best, valves racing with appropriate thickness of lamella, 100% synthetic racing oil only, racing variation (high speed) perfectly tuned ... .
contains:
Master cylinder racing aluminum 5 transfers liquid-cooled 50cc Ø40mm
-Culasse Racing aluminum high pressure liquid cooled
-piston Cast racing BIDALOT
-Segment Cast chrome end 40mm x 1mm thick
X2 crab piston clips reinforced 1mm thick
Axis-piston Ø12mm X 32mm
-Cage Reinforced needle Ø12 X 16 X 16mm
-Rondelle + Copper cylinder head bolts
-Joints Yoke rings
-3 Base seals thicknesses 0,15 / 0,25 and 0,40mm
-Sticker
-Notice Complete information and installation
Optional we offer a preparation course 1, this preparation is a modification of the exhaust port by increasing the charts and improvement of the duct, it increases the cylinder performance. Improved bottom skirt is also included in the amendment. Allow a little extra time for this preparation!
