- -20%
Reference: 36 6941
Clips, MALOSSI type G piston pin rings for Ø10mm pin 0.8mm material
Ideal for the refurbishment of your engine!
Banner
Approved, authorized on roads, public roads!
Straight out of the house with the famous lion head, here is the MALOSSI MHR 50cc kit! Respecting the authorized cubic capacity but offering additional performance. This kit has a Ø40mm bore and is made of nikasil treated aluminum, this treatment carried out during manufacture by MALOSSI, is the strongest on the whole market, hence an unprecedented reputation of this great Italian brand.
Intended to replace an original type engine, it nevertheless remains torquey and still offers better performance than a simple small kit or original engine ... It is fitted with a fine chrome segment mono piston, greatly reducing friction and favoring a further climb in the towers without neglecting the couple. A slight preparation on the piston was made on the rear skirt with a light to improve the scanning.
The cylinder has a revised and corrected 6-transfer intake, an enlarged exhaust booster, sharper diagrams, a more than smooth finish and bore ...
With this high engine, a high compression monobloc cylinder head is provided, it has a frustoconical combustion chamber with a polished finish, this cylinder head is mounted on an O-ring for more security.
Our opinion ... MALOSSI even in compliance, knows how to do it! A real kit offering performance, both in torque and at high speed, without forgetting solid with a perfect finish. Obviously we recommend it to roll every day, it is delivered 100% complete with its cylinder head, its piston, segment, clips, 10mm axis, karbonit strips, plugs with necklaces, seal pack, ...
We recommend to accompany this kit as a minimum: suitable exhaust, Ø17.5mm carburetor, reinforced bearing, cold racing spark plug, ...
This pack contains:
Aluminum cylinder Ø40mm nikasil
Single segment piston
Chromed end segment Ø40mm
Piston pin Ø10mm
C-piston clips
High compression cylinder head
Complete seal pack
Lamellar karbonit valves
Cap with collars for cylinder head antifreeze
Stickers
Explanatory notice (booklet)
As an option we offer you a stage 1 preparation, this preparation is a modification of the exhaust light by increasing the diagrams and improving the duct, it increases the performance of the cylinder. An improvement in the skirt bottoms is also included in this modification. Allow a little extra time for this preparation!
Mounts on :
2-stroke horizontal liquid minarelli scooter
2-stroke engine horizontal minarelli scooter air spent in liquid (long only)
APRILIA AREA 51 LC
APRILIA GULLIVER 50
APRILIA SR NETSCAPER 50 LC
APRILIA RALLY 50 LC
APRILIA SR RACING 50 LC
APRILIA SONIC LC
APRILIA SR REPLICA LC
APRILIA SR STEALTH
BENELLI 491 SPORT LC
BENELLI K2 50 LC
BETA ARK 50 LC
BETA EIKON 50 LC
GARELLI GSP 50 LC
ITALJET DREAGSTER 50 LC
MALAGUTI F15 FIREFOX 50 LC
MALAGUTI F12 DIGIT KAT LC
MALAGUTI F12 PHATOM LC
MALAGUTI F12 R LC
MBK MACH G 50 LC
MBK NITRO 50 LC
YAMAHA AEROX 50 LC
YAMAHA JOGRR 50 LC
Reference: 36 6941
Ideal for the refurbishment of your engine!
Reference: 1012877
Ideal for plugging carburettor air intakes or cylinder head.
Reference: 34 8542.A0
The replacement piston MHR for your MHR 50cc mono-segment kits minarelli vertical or horizontal scooter.
Reference: 11 8287C
Pack a few seals available !!!
Reference: 38 8578
Spare cylinder head MALOSSI MHR for kit 50cc in diameter 40mm Replica.
Reference: 31 8558
A high performance engine cylinder head without respecting the 50cc displacement, reliable and sturdy scooter minarelli horizontal liquid and yamaha.
Reference: 23 3829BA
Ideal in case of loss or breakage of your old axis and piston clips.
Reference: 06 8187
Pack a few seals available !!!
Reference: 129.0598
An original type kit that will allow guests to ride all day without spending astronomical sums in a cylinder. Ideal if primer or tightening your old engine.
Reference: H02073840
A very solid cast iron original type kit.
Reference: 129.0604/C
A kit more torque than the original while also being reliable that allow guests to ride all day without spending astronomical sums in a cylinder. Ideal if primer or tightening your old engine.
Reference: 479128
A high solid motor, ideal for start fresh!
Reference: 166.0094
The famous 50cc cast iron kit from POLINI, finishing, use of high quality materials and guaranteed performance!
Reference: 032050
A high aluminum engine with exhaust and cylinder head high compression booster with a totally ridiculous price!
Reference: KT00094
This small high engine without cylinder head is ideal to refurbish its NITRO, AEROX ... preserving very good fastness!
Reference: 483461
The kit kind cheapest origin of the market, ideal for travel every day, small price to appointments.
Reference: 031000F
A little more efficient than the original types such as the TNT ORIGINAL or TEKNIX, this small high engine without cylinder head is ideal for refurbishing its NITRO, AEROX... By having a small power gain!
Reference: 31 8556
A high complete 50cc cast iron engine of very high quality for your nitro, aerox, ...
Reference: EQ-723
An original type kit that will allow you to ride every day without spending astronomical sums in a cylinder. Ideal in case of starting or tightening your old engine.
Reference: EQ-767
Racing version 10 transfers of BARIKIT FONTE 50cc for horizontal liquid engine!
Reference: 129.0604
A more torquey kit than the original while being as reliable which will allow you to drive every day without spending astronomical sums in a cylinder. Ideal in case of starting or tightening your old engine.
Reference: 251526
A high engine cylinder head without cheap for your nitro, aerox, jog ... engine minarelli horizontal liquid scooter.
Reference: 030307
A kit has very low prices, strong, ideal to get your nitro, jog, aerox ... Anew!
Reference: 129.0612
Just below the GT RS10, RS10 the NIKASIL PRO is a high performance aluminum kit with torque / power ratio excellent.