Reference: GR00712
Pack seal for kit / high engine DR Racing or other 50/70 / 80cc universal on minarelli am6
Pack seal of quality amounting on many high engine 50, 70 and 80cc on mécaboite engine minarelli am6.
Banner
Attention, this 50cc cylinder head piston cylinder kit is approved on the road in the sole measure where the machine (moped) on which it is mounted remains 100% original with original flange on the exhaust, ignition ... moped obviously no longer respects French legislation which is 45km / h maximum.
The black DR Racing kit is identical to the 50cc black TOP PERFORMANCES, it is very close to the origin. Its hemispherical high compression cylinder head makes it a more efficient kit than the original. It is road approved, same French road. Its MINACROM treated cast iron makes it very solid. We appreciated its piston with a chrome segment and its finish worthy of high-end cast iron! Its very well calculated compression ratio (1:12) makes it quite efficient despite the diagrams not much higher than the original. Its exhaust is also slightly more worked. Its displacement is 49.7cc (Ø40.3mm for 39mm stroke). It is the strongest 50cc kit on the market !! With such a price, good performance, increased strength and France approval, it is really perfect.
We recommend at least to accompany this kit : carburetion settings, expansion pot. (the cylinder head must be tightened to 1.6 ÷ 1.8 kgm)
The pack contains :
-Piston
-2 clips
-2 segment including a chrome
-Notice
- Cylinder head bleed screw
-Pack full seal
-1 high compression cylinder head
Spare parts :
Segments
Seals
As an option we offer a stage 1 preparation, this preparation is a modification of the channels and the exhaust port by increasing the diagrams and improving the duct, it increases the performance of the cylinder. An improvement to the piston and the bottom of the skirt is also included in this modification. Allow a little extra time for this preparation!
Mounts on 50cc motorcycles with gearbox equipped with the minarelli am3, am4, am5, am6 euro 1, am6 euro 2 engine :
APRILIA RS 50cc am6 engine from 1997 to 2006 (new attention after 2006 in derbi euro 3 engine)
APRILIA RX am6 engine (attention news after 2006 in derbi euro 3 engine)
APRILIA MX am6 engine (attention news after 2006 in derbi euro 3 engine)
APRILIA TUONO 50cc am6 engine from 1997 to 2006 (new attention after 2006 in derbi euro 3 engine)
BETA RR
BETA RR ALU
BETA CRE
HONDA HM
HONDA CRE
HONDA BAJA
HUSQUVARNA WXE
HUSQUVARNA CH
HM DERAPAGE
HM CRE
MALAGUTI DRAKON
MALAGUTI XTM
MALAGUTI XSM
FANTIC CABALLERO
PEUGEOT XP6
PEUGEOT XPS
MOTORHISPANIA RYZ
PEUGEOT XPS
PEUGEOT XP STREET
PEUGEOT XP STREET EVO
PEUGEOT XR6
MOTORHISPANIA RX
PEUGEOT XR7
MOTORHISPANIA RX-R
RIAJU RS1
RIEJU RS2
RIEJU RS2 MATRIX
RIEJU RS2 MATRIX PRO
RIEJU SMX
RIEJU MRX
RIEJU SPIKE
KEEWAY TX FR
YAMAHA DT
MBK X-LIMIT
YAMAHA TZR
MBK X-POWER
SHERCO SM
SHERCO ENDURO
SHERCO HRD
SHERCO ENDURO
And many other machines!
Reference: GR00712
Pack seal of quality amounting on many high engine 50, 70 and 80cc on mécaboite engine minarelli am6.
Reference: TS00179
High compression replacement cylinder head, black model Ø40,3mm 50cc kit on mécaboite minarelli am6.
Reference: PT00104
Spare piston for your high engine 50cc Ø40,3mm and original cylinder on minarelli am6.
Reference: H011381403
A kit a bit more powerful than the original while maintaining excellent reliability for a completely ridiculous price.
Reference: 032062
For a complete refurbishment of your high-end CPI engine at a low price.
Reference: 034000A
A strong and powerful 50cc high engine. High quality and approved for daily use.
Reference: 129.0615/GT
Already available at our place, the newest member of FURYTECH! More powerful, more torquey, ...
Reference: 011332403
The luxury version of the AIRSAL 50cc in two-segment, a powerful, solid, torquey kit and above all with an attractive price, very good basis for engine preparation.
Reference: CIL-788
Cylinder / piston without cylinder head ideal for meeting the 50cc engine and circulate daily. 7 transfers, extended oval exhaust, dual piston segments .... To accompany a cylinder head high compression BARIKIT.
Reference: 133.1011
A very good high engine which brings a very good performance gain while preserving the solidity and the legal displacement of 50cc.
Reference: 013006476
The deluxe version of 50cc AIRSAL bi-segment, a powerful kit, strong, torquey and especially with an attractive price, very good engine preparation base.
Reference: 031000G
A small kit at a low price, nice, solid and efficient.
Reference: 032065
Here is a top engine of very good quality much cheaper than the origin which offers better heat dissipation, less friction...
Reference: 01300940
A great small kit 50cc aluminum with exhaust with bar, top to increase performance while remaining in the statutory and displacement in an accessible price on your ICC and other types am6!
Reference: CK.44.492.G2
A very powerful kit with a specific admission has 6 lateral transfers and a stud bolt! Performance level! To put with the POLINI and MALOSSI!
Reference: 482036
The 50cc kit type origin the cheapest on the market with a quality and a correct finish.
Reference: 030310
One of the cheapest on the market, ideal for repairing a high engine original whose breech is not damaged!
Reference: 317341
Good quality at a good price, a high engine ideal to maintain an original configuration.
Reference: EQ-788
High complete engine ideal to respect the 50cc displacement and to circulate every day 7 transfers, enlarged oval exhaust, high compression cylinder head mounted on O-ring, two piston segments ....