Reference: H040890399
Aluminum cylinder head AIRSAL AIRSAL for kit 50cc cast iron DERBI euro 1 & 2
A yoke of very good quality which would ideal in case of breakage or wear on your head on your 50cc cast AIRSAL Origin kit.
Banner
Introducing the all new 50cc cylinder in AIRSAL. For the first time AIRSAL launches in iron kits. You should know that a cast kit is stronger on the long journey, so it provides additional reliability but it gives a little less power than aluminum kit.
This model has Ø39,9mm diameter do not hide, good performance in comparison to the original. It will certainly be more efficient because it has a very correct finish, work in the channels but is revised and corrected above all, a good item to start with a good foundation.
It is of course equipped with a twin-piston segment for better torque and scanning. Warning sold without cylinder head. In clear this is a very good roll, better than the original that will give you reliability and torque without spending too much.
The pack contains:
Pack complete joint
Cast iron cylinder 5 transfers
Bi-piston segment
2 segment
2 piston clips
Ø12mm piston pin
Optional we offer a preparation course 1, this preparation is a modification of the exhaust port by increasing the charts and improvement of the duct, it increases the cylinder performance. Improved bottom skirt is also included in the amendment. Allow a little extra time for this preparation!
This high engine fits the 50cc motorcycles équpées gearboxes from Euro1 and Euro2 DERBI:
BULTACO Astro Enduro 50cc
BULTACO Lobito 50cc supermoto
Derbi GPR 50 Nude before 2004 (EBS050)
Derbi GPR 50 Racing before 2004 (EBS050)
Derbi GPR 50R Replica year 2001-2004
Derbi GPR 50cc year 1998-2001
Derbi Senda 50cc before 2000 (tubular frame)
Derbi Senda 2000 50cc before 2004 (perimeter frame) Euro2
Derbi Senda DRD supermotard before 2000 (tubular frame)
Derbi Senda DRD supermotard before 2004 (perimeter frame) Euro 2
Derbi Senda Enduro before 2000 (tubular frame)
Derbi Senda DRD R enduro before 2000 (tubular frame)
Derbi Senda DRD R enduro before 2004 (perimeter frame) Euro2
Derbi Senda SM before 2000 (tubular frame)
Derbi Senda SM before 2004 (perimeter frame) Euro 2
Derbi Senda X-Race 2000 before 2004 (perimeter frame) Euro 2
Derbi Senda X-Race Trail before 2000 (tubular frame)
Derbi Senda X-Trem Enduro before 2000 (tubular frame)
Derbi Senda X-Trem Enduro before 2004 (perimeter frame) Euro 2
Derbi Senda SM X-Trem before 2000 (tubular frame)
Derbi Senda SM X-Trem before 2004 (perimeter frame) Euro 2
GILERA GP Replica 50cc
GILERA GSM 50cc
GILERA 50cc HAK Euduro
GILERA RCR Euduro 50cc (tubular frame)
GILERA SMT SM 50cc (tubular frame)
GILERA Sioux Enduro 50cc
GILERA Zulu Enduro 50cc
And many other models ...
Reference: H040890399
A yoke of very good quality which would ideal in case of breakage or wear on your head on your 50cc cast AIRSAL Origin kit.
Reference: H140890399
A comprehensive quality seal pack, ideal for wind your engine without leakage.
Reference: H060890399
A good quality piston to change every 7000 kms.
Reference: H110890399
Ideal for lost compression in order to present its high engine renovated.
Reference: 030311
A good price for cylinder leave on a high solid engine, original type.
Reference: EQ-993-S
The racing version of the 50cc Ø39.9mm BARIKIT. Mono-segment with stud cylinder head.
Reference: CK.12.501.G
The most powerful kit of the house ITALKIT, mono-segment with bolt head, of very high quality!
Reference: CK.12.501.G1
For those looking for the powerful kit, strong and torquey! Mono-segment standard cylinder Sport model.
Reference: EQ-738
Solid and efficient, high ideal complete engine to meet the 50cc engine and circulate all day. 5 transfers, oval exhaust has booster, high compression cylinder head, piston segments bi ....
Reference: 482037
The cheapest kind original kit market with quality and proper finishing.
Reference: EQ-740
Solid and efficient, a high sport model engine ideal for respecting the 50cc displacement and circulating every day 5 transfers, oval exhaust to boost, high compression cylinder head mounted on O-ring, piston bi segments ...
Reference: 010814399
A small cheap kit that will bring light performance to your machine while keeping a very good reliability on your machine.
Reference: CI.12.500.G1
A powerful kit, strong and torquey! Sport model yoke without bi-segment adapted to be mounted with a mono block breech (one part).
Reference: 477649
A product of very good quality original type to leave with a high solid motor.
Reference: 129.0595
Out of production!
Reference: 220384
A very good quality kit that will offer excellent solidity a good little grain of performance and all at low prices!
Reference: 56112
A motor type origin of good quality with a finish more than correct and a small price guarantees in the range of high engines 50cc for mécaboite DERBI euro 1 & 2.
Reference: 3112147
A kit with very well worked channels, a booster exhaust and excellent compression ratio. A replica of the famous MHR Team but without stud breech and some detail. But it remains an excellent kit 50cc.
Reference: 9917400
A famous kit for its reliability and sturdiness, ideal for riding every day while having a good top speed, acceleration and recovery.
Reference: CK.12.500.G
The bi-segment version with 50cc cylinder head stud for your DERBI engine, very torquey and strong, he does not neglect high revs! High quality certified!