Reference: 455415
Pack seal TEKNIX high engine DERBI euro 1 & 2
A complete pouch for a reassembly without leak of your high engine.
Banner
Here is the kit 50cc original type but well improved home TEKNIX, this cylinder with its cylinder head will be installed with your engine DERBI euro 1 and 2. It is of good quality and the finish is really nice for the price, at the same time the TEKNIX house has nothing more to prove quality level on the equipment low price!
Remember that aluminum offers better heat dissipation, but also better expansion, less friction ... a cast iron cylinder. An excellent compromise to start on new. It also offers a small performance boost thanks to its slightly increased diagrams, its improved high compression yoke and its enlarged exhaust!
The pack contains:
Cylinder
Two-piston piston
Cylinder head
segments
Piston pin
clips
Pack attached
Optionally we offer a stage 1 preparation, this preparation is a modification of the exhaust port by increasing the diagrams and improving the pipe, it increases the performance of the cylinder. An improvement of the bottom of skirt is also included in this modification. Allow a little extra time for this preparation!
This high engine mounts on 50cc motorcycles with gearboxes equipped with the DERBI Euro1 and Euro2 engine:
BULTACO Astro enduro 50cc
BULTACO Lobito supermotard 50cc
DERBI GPR 50 Nude before 2004 (EBS050)
DERBI GPR 50 Racing before 2004 (EBS050)
DERBI GPR 50R Replica year 2001 to 2004
DERBI GPR 50cc year 1998 to 2001
DERBI Senda 50cc before 2000 (tubular frame)
DERBI Senda 2000 50cc before 2004 (perimeter frame) Euro2
DERBI Senda DRD supermotard before 2000 (tubular frame)
DERBI Senda DRD supermotard before 2004 (perimeter frame) Euro 2
DERBI Senda Enduro before 2000 (tubular frame)
DERBI Senda R DRD Enduro before 2000 (tubular frame)
DERBI Senda R DRD Enduro front 2004 (perimeter frame) Euro2
DERBI Senda SM before 2000 (tubular frame)
DERBI Senda SM before 2004 (perimeter frame) Euro 2
DERBI Senda X-Race 2000 before 2004 (perimeter frame) Euro 2
DERBI Senda X-Race Trail before 2000 (tubular frame)
DERBI Senda X-Trem Enduro before 2000 (tubular frame)
DERBI Senda X-Trem Enduro front 2004 (perimeter frame) Euro 2
DERBI Senda X-Trem SM before 2000 (tubular frame)
DERBI Senda X-Trem SM before 2004 (perimeter frame) Euro 2
GILERA GP Replica 50cc
GILERA GSM 50cc
GILERA HAK Euduro 50cc
GILERA RCR Euduro 50cc (tubular frame)
GILERA SMT SM 50cc (tubular frame)
GILERA Sioux Enduro 50cc
GILERA Zulu Enduro 50cc
And many other models ...
Reference: 455415
A complete pouch for a reassembly without leak of your high engine.
Reference: 441820
A good quality piston to change every 7000 kms. To TEKNIX cylinder and ORIGIN. Last piece available!
Reference: 455108
Ideal for refurbishing your high engine in case of loss of compression.
Reference: 482347
Indispensable part for the proper functioning of your cooling circuit.
Reference: CK.12.500.G1
A powerful, solid and torquey kit! Two-segment Sport model with single cylinder head. high compression.
Reference: CI.12.500.G1
A powerful kit, strong and torquey! Sport model yoke without bi-segment adapted to be mounted with a mono block breech (one part).
Reference: G-993-R
39.9mm version 50cc cylinder head stud prepared by professionals BARIKIT. Even more powerful than other 50cc BARIKIT!
Reference: 129.0595/GT
The latest addition FURYTECH! More powerful, more torque ...
Reference: 032060
A quality and solid set for your high DERBI engine!
Reference: 477649
A product of very good quality original type to leave with a high solid motor.
Reference: 220384
A very good quality kit that will offer excellent solidity a good little grain of performance and all at low prices!
Reference: 3112371
The best 50cc kits on the market for DERBI euro 1 and 2! It is the strongest, most powerful that I have used in competition.
Reference: 3112147
A kit with very well worked channels, a booster exhaust and excellent compression ratio. A replica of the famous MHR Team but without stud breech and some detail. But it remains an excellent kit 50cc.
Reference: 56112
A motor type origin of good quality with a finish more than correct and a small price guarantees in the range of high engines 50cc for mécaboite DERBI euro 1 & 2.
Reference: 518458
Set cast iron kit 50 + reinforced crankshaft in full masses for DERBI EURO 2 (until 2006).
Reference: CIL-740
Strong and powerful, cylinder / piston without cylinder head ideal for meeting the 50cc engine and circulate all day. 5 transfers, oval exhaust has booster, dual piston segments .... Model sport accompanied by a yoke around with O-ring.
Reference: KT00115
The best quality / price! A premium product which unfortunately is not quite known, but yet to surprise many.
Reference: 11000052
A 50cc high-end home kit BIDALOT for DERBI euro 1 & 2.
Reference: EQ-993-S
The racing version of the 50cc Ø39.9mm BARIKIT. Mono-segment with stud cylinder head.
Reference: 9917400
A famous kit for its reliability and sturdiness, ideal for riding every day while having a good top speed, acceleration and recovery.