Reference: PT00154
Piston for kit 50cc DR Racing TOP PERFORMANCES black and 40,28mm 40mm DERBI euro 1 & 2
Replacement piston for your top 50cc engine derbi euro 1 & 2.
Banner
Approved on public roads! Respects the capacity of 50cc.
Here are the best value on the market! This kit rolls / piston / cylinder head DR Racing is a top engine replacement of cast iron, it is much more solid than the original which did not prevent it from being relatively efficient. Its diameter is 40mm so it develops the limited capacity of approximately 50cc.
The channels are reworked, the flowcharts are slightly increased, the cylinder head has a hemispherical combustion chamber high compression. We all regret as this room is not polished but blasted and painted. The cylinder is made with a cast iron treated minacrom which makes heavy duty!
The piston is a model Bi segment in METRAKIT with a segment L. This piston has the same side nipples! In short this little kit is a great alternative model that shoed you slightly improve performance for a class price!
We advise this kit with: carburation 17,5mm to 19mm, exhaust racing, b9es candle.
The pack contains:
Cylinder 5 transfers exhaust normal Ø40mm cast
Cylinder head high compression
Pack complete joint
X2 segments with a L
Piston pin Ø12mm reinforced
Ø12mm piston X2 clips of G
Sticker
notice
Spare parts:
piston Ø40mm
Piston Ø40,8mm coast reboring approved
Ø40mm segments
Segments Ø40,8mm reboring
Pack joined
Optional we offer a preparation course 1, this preparation is a modification of the exhaust port by increasing the charts and improvement of the duct, it increases the cylinder performance. Improved bottom skirt is also included in the amendment. Allow a little extra time for this preparation!
This high engine fits the 50cc motorcycles équpées gearboxes from Euro1 and Euro2 DERBI:
BULTACO Astro Enduro 50cc
BULTACO Lobito 50cc supermoto
Derbi GPR 50 Nude before 2004 (EBS050)
Derbi GPR 50 Racing before 2004 (EBS050)
Derbi GPR 50R Replica year 2001-2004
Derbi GPR 50cc year 1998-2001
Derbi Senda 50cc before 2000 (tubular frame)
Derbi Senda 2000 50cc before 2004 (perimeter frame) Euro2
Derbi Senda DRD supermotard before 2000 (tubular frame)
Derbi Senda DRD supermotard before 2004 (perimeter frame) Euro 2
Derbi Senda Enduro before 2000 (tubular frame)
Derbi Senda DRD R enduro before 2000 (tubular frame)
Derbi Senda DRD R enduro before 2004 (perimeter frame) Euro2
Derbi Senda SM before 2000 (tubular frame)
Derbi Senda SM before 2004 (perimeter frame) Euro 2
Derbi Senda X-Race 2000 before 2004 (perimeter frame) Euro 2
Derbi Senda X-Race Trail before 2000 (tubular frame)
Derbi Senda X-Trem Enduro before 2000 (tubular frame)
Derbi Senda X-Trem Enduro before 2004 (perimeter frame) Euro 2
Derbi Senda SM X-Trem before 2000 (tubular frame)
Derbi Senda SM X-Trem before 2004 (perimeter frame) Euro 2
GILERA GP Replica 50cc
GILERA GSM 50cc
GILERA 50cc HAK Euduro
GILERA RCR Euduro 50cc (tubular frame)
GILERA SMT SM 50cc (tubular frame)
GILERA Sioux Enduro 50cc
GILERA Zulu Enduro 50cc
And many other models ...
Reference: PT00154
Replacement piston for your top 50cc engine derbi euro 1 & 2.
Reference: TS00181
Spare cylinder head high compression, black model to 40mm kit Derbi mécaboite euro 1 & 2.
Reference: GR00725
Replacement seal kit for DR 50 kit with stud O-rings.
Reference: SG15852
Set of two high quality steel segments, also available in re-bore hinge!
Reference: CIL-740
Strong and powerful, cylinder / piston without cylinder head ideal for meeting the 50cc engine and circulate all day. 5 transfers, oval exhaust has booster, dual piston segments .... Model sport accompanied by a yoke around with O-ring.
Reference: EQ-740
Solid and efficient, a high sport model engine ideal for respecting the 50cc displacement and circulating every day 5 transfers, oval exhaust to boost, high compression cylinder head mounted on O-ring, piston bi segments ...
Reference: 030311
A good price for cylinder leave on a high solid engine, original type.
Reference: G-993-R
39.9mm version 50cc cylinder head stud prepared by professionals BARIKIT. Even more powerful than other 50cc BARIKIT!
Reference: 3112147
A kit with very well worked channels, a booster exhaust and excellent compression ratio. A replica of the famous MHR Team but without stud breech and some detail. But it remains an excellent kit 50cc.
Reference: 11000052
A 50cc high-end home kit BIDALOT for DERBI euro 1 & 2.
Reference: 9917400
A famous kit for its reliability and sturdiness, ideal for riding every day while having a good top speed, acceleration and recovery.
Reference: CK.12.501.G1
For those looking for the powerful kit, strong and torquey! Mono-segment standard cylinder Sport model.
Reference: HM02 MVT
A powerful kit with high quality materials. He will bring strength and torque!
Reference: 56112
A motor type origin of good quality with a finish more than correct and a small price guarantees in the range of high engines 50cc for mécaboite DERBI euro 1 & 2.
Reference: CIL-738
Strong and powerful, cylinder / piston without cylinder head ideal for meeting the 50cc engine and circulate all day. 5 transfers, oval exhaust has booster, dual piston segments .... To accompany a bolt to fix with 2 screws.
Reference: 477649
A product of very good quality original type to leave with a high solid motor.
Reference: 010814399
A small cheap kit that will bring light performance to your machine while keeping a very good reliability on your machine.
Reference: EQ-993-S
The racing version of the 50cc Ø39.9mm BARIKIT. Mono-segment with stud cylinder head.
Reference: KT00115
The best quality / price! A premium product which unfortunately is not quite known, but yet to surprise many.
Reference: CI.12.500.G
A powerful kit, strong and torquey! Racing model bi-segment without yoke adapted to be mounted with a stud head (two parts).