Kit high engine 177cc Ø63mm with cylinder head DR Racing cast scooter STAR LML, DELUXE, VESPA, TS, SPRINT, VELOCE 125,150cc

Attention, high engine exceeding the cubic capacity of 125cc, reserved for competition on circuit, run ...

Here is the high cast iron motor with cylinder head from DR Racing (MotorParts group with Top Performances, TPR) Made In Italy. A complete kit for guaranteed performance and engine reliability. Its displacement reaches 177cc for a 63mm diameter bore (in combination with the original 57mm stroke and original 105mm connecting rod). With a cylinder equipped with 5 transfers of admission including 4 specific side and a rear with a studied and special architecture as well as a well widened exit exhaust with boosters with a diameter of 37mm for the fitting of an exhaust, an engine efficiency that will be significantly improved at all levels.



Ideal for quality refurbishment and extra performance. The cylinder head is a fairly impressive aluminum model, lightweight and designed in materials such as cooling will be improved. Chamber of hemispherical shape with a finish that we describe as very average (see photo of the room) but which will still offer good benefits.



The piston chosen to accompany this high engine is a high-end two-segment ASSO with a special high-silicon treatment guaranteeing better heat exchange and performance at the key. The latter has a slightly domed cap increasing the compression ratio at the same time, a lateral preparation with two more openings on the rear skirt via 4 openings to mate perfectly with the intake of the cylinder and improve the sweeping / greasing of this thermal group and low engine.



Two thick, heavy-duty treated steel segments, chromed with a thickness of 2 mm, the torque will be greatly improved with the increase in friction at the expense of high speeds. Of course, provided with its axis Ø15 X 54 mm length and 2 clips in G. Delivered complete as presented.You will understand, this high engine will be a real asset combining strength, price, reliability, longevity and performance !



We recommend to accompany this high engine with at least : increased carburation in flexible assembly with racing intake pipe, unbridled racing ignition, cold racing candle, 100% synthetic engine oil, racing racing exhaust ...

Contains :

-Cylinder cast iron 5 transfers and exhaust booster
-Carbonate high compression aluminum
-Piston ASSO segment
-Segments chromed steel thickness 2 mm
-Axle piston Ø15 X 54 mm
-Clips in G
-Assembled aluminum joint
-Admission joint



Installs on:

-LML Star Deluxe EU1 125 125 2T 01-03, Deluxe Star EU3 125 125 2T 08-09, Deluxe Star EU1 150 150 2T 01-03, Deluxe Star EU3 150 150 2T 08-09

-Piaggio Vespa PX 125 125 2T 98-01, Vespa PX 125 125 2T 11-11, Vespa PX 125 EU2 125 2T 01-07, Vespa PX 30 Anni 125 2T 07-08, Vespa PX E 125 Arcobaleno 125 2T 81-97 , Vespa PX 150 150 2T 98-01, Vespa PX E 150 Arcobaleno 150 2T 81-97



Optionally we offer a stage 1 preparation, this preparation is a modification of the channels and exhaust light by increasing the diagrams and improving the pipe, it increases the performance of the cylinder. An improvement of the piston and skirt stocking is also included in this modification. Allow a little extra time for this preparation!