Reference: 171800
Paste assembly muffler PRESTO 170 grams
Ideal for safe and leak-free mounting of your exhaust.
Banner
Please refer to the photo by enlarging it before purchase!
Here is the very complete and very high quality seal pack from ATHENA to restore all your old and rare motorcycles 50cc GILERA BULLIT, EAGLET, RM .... Delivered as presented on picture!
contains:
X1 clutch housing seal
X3 base seals of different thicknesses
X1 water pump seal
X1 aluminum cylinder head gasket
X2 metal washers
X4 cardboard washers
X7 O-rings
According to ATHENA, is mounted on:
Gilera BULLIT 50cc from 1990 to 1993
Gilera EAGLET 50cc from 1995 to 1998
Gilera RM 20-50 LC
Gilera TWIN 50cc
Gilera H @ K
Gilera RT 50cc
Gilera GSM engine MORINI
Gilera R 50
Gasgas 50 / 70cc trial
ROXON DUEL 50cc
Reference: 171800
Ideal for safe and leak-free mounting of your exhaust.
Reference: P400510850010
Complete gasket set for MORINI M101 engine.
Reference: P400150600221
For a total refurbishment of the motor seal on your FRANCO MORINI 2T G30 LC 50 cm3 1992 to 1994
Reference: P400170600031
Indispensable for the complete refurbishment of the top engine seal of your 2 wheels!
Reference: 168917
A top-of-the-range, quick-setting sealant for maximum resistance and tightness.
Reference: VKM00040
Artein cutting joint sheets
Reference: VJ.22.1
Indispensable for refurbishing the engine sealing of your Ø47mm aluminum ITALKIT kit.
Reference: 86300010
High quality replacement gaskets, indispensable to the maintenance and perfect sealing of your engine.
Reference: 209.0380
Highly recommended after each disassembly to avoid loss of compression or engine leakage!
Reference: 440923
ARTEIN self-cut seal sheets 0.15 0.25 and 0.50 mm.
Reference: 5910
A top-of-the-range joint compound for maximum resistance and tightness. This paste resists from -55 ° to 250 ° C without problem.
Reference: 279134_cgn
A good quality paste that resists up to 180 ° C with a maximum drying time after 24 hours.
Reference: 5926
A high-end sealant for maximum resistance and sealing from -60° to + 250°.
Reference: 2374
A low viscosity paste which will allow you a perfect sealing of your engine. This paw is often used by professionals.
Reference: 152110
Kit of four 150°C paper seal sheets, different thicknesses included.