
Reference: 27 8118.K0
Set of 4 strips of valves MALOSSI karbonit for VL9 (HONDA, PEUGEOT ...) or VL12 (MINARELLI, NITRO ...)
Set of plates KARBONIT 0.30 and 0.35 mm for VL9 and VL12 MALOSSI.
Banner
MALOSSI valve slat pre-cut in 0.30 or 0.35mm, it will allow you to fine-tune your settings while gaining performance especially at high revs, it is ideal with at least one pot, a variator and unclamping. We recommend 0.30mm for scooters using 8000 to 10,500 revolutions, 0.35mm for more than 9,500 revolutions. These blades are made of high quality carbon. Mount them on an original or racing base. Installs on Peugeot scooter, Honda...
List of machines on which these slats are mounted :
HONDA VISION 50 2T
PEUGEOT RAPIDO 50 2T
PEUGEOT ST 50 2T
Reference: 27 8118.K0
Set of plates KARBONIT 0.30 and 0.35 mm for VL9 and VL12 MALOSSI.
Reference: 27 7440.C0
Valves that are suitable for small and large configurations.
Reference: 213.0534
Ideal for tuning your carburation to the performance of your cylinder!
Reference: 27 8118.C0
Set of 6 blades for valves MALOSSI VL9 or V12!
Reference: 27 2728.C0
Out of the ordinary finish. Here are valves that will bring you reliability, longevity and power.
Reference: 27 2728.KO
Set of 3 blades for push or original engines. To make a perfect adjustment of your gear.
Reference: 9912970
Ideal for fine-tuning your carburation settings with 2 thicknesses of the blades to choose from.
Reference: 231741
Required part to increase your performance at the carburetion level on an unbridled or prepared configuration.
Reference: 213.0049
Ideal to accompany a pushed engine configuration and offers more performance to your scooter.
Reference: 9912550
Racing dampers, ideal to accompany a prepared engine configuration.
Reference: 462491
A large intake valve box that allows you to have more power, recovery and speed!
Reference: 213.0038
Replacement valves for POLINI valve box Ø21.
Reference: 440165
Ideal for increasing the performance of its 50cc scooters!
Reference: 829.0002
A big box inlet valve which allows you to have more power, and speed recovery!
Reference: 9873
Compulsory part to increase your performance in terms of carburation on an unbridled or prepared original configuration.
Reference: 27 7366.K0
Two 100X100mm boards in Karbonit MALOSSI available in 0.30, 0.35 and 0.40mm. It can be cut and therefore adapts to all 2-stroke motor vehicles. Choice of thickness.