Reference: 213.0012
POLINI competition valves for scooter VESPA ET3, ETS, SPECIAL ... PIAGGIO APE 50, 125cc
High-end valves complete with slats. To be assembled in the pipes admission kits with POLINI valves from VESPA, APE ...
Banner
With a lot of study and designed in the best materials, here is the single-leaf system on the Ø24mm intake manifold 3 POLINI fixing holes for VESPA scooter.
Obviously of high quality, it eliminates all the disadvantages of the original admission. Switch to a valve system to gain torque, power, speed and consumption!
It can be fitted with original crankcases and crankshaft with 24mm carburetion. For more power, POLINI recommends preparing the casings. Delivered complete as presented.
In download link, a 100% complete PDF of technical drawing and advises on the use of this admission.
Mounts on scooter:
-VESPA 50 HP -FL2 - VESPA 50 PK - VESPA 50 XL - VESPA 125 ETS - VESPA 125 PK - VESPA 125 XL ...
POLINI strongly advises after 200 km of use to carry out a serious and general check of the installation of this admission. To check tightness and locking against the crankcase. All this due to the increase in power caused by this competition piece.
Reference: 213.0012
High-end valves complete with slats. To be assembled in the pipes admission kits with POLINI valves from VESPA, APE ...
Reference: 213.0500
POLINI high end slats.
Reference: 215.0117
Ideal to pass on a system has flaps and thus to gain in couple, power and consomation! To accompany a 17,5mm POLINI CP special for the best!
Reference: 215.0162
Ideal for improving and optimizing the performance of your VESPA scooter.
Reference: 15801000
Replacement intake manifold for your VESPA!
Reference: 215.0232
Ideal to pass on a system has flaps and thus to gain in couple, power and consomation! To accompany a 17,5mm POLINI CP special for the best!
Reference: 5304
Intake pipe for your SHBC 19.19 carburettor.
Reference: 215.0270
Valve inlet kit for increased performance, pipe fitting Ø 23mm.
Reference: 215.0112
Valve inlet pipe for special kit POLINI 140.0051 / L.
Reference: 215.0163
For an improved admission with carburettor POLINI CP 24mm flexible mounting, fixing by 3 holes!
Reference: 215.0205
For improved intake (to pass over valve system) with carburettor POLINI CP or other flexible mounting in Ø22 to 26mm, fixing by 2 holes as the origin.
Reference: 215.0204
Ideal to pass on a system has flaps and thus to gain in couple, power and consomation! To accompany a 17,5mm POLINI CP special for the best!
Reference: 1610843
A pre-adjusted MALOSSI carburettor kit delivered ready to be mounted on a pipe with flexible Ø37mm sleeve on vespa PK 50cc 2T.
Reference: 215.0118
Valve system with flexible sleeve for increased power and torque!
Reference: 02 4957B
Ideal to improve and optimize the performance of your scooter VESPA 50 and 125cc.
Reference: 215.0113
Valve inlet pipe for special kit POLINI 140.0051 / L.
Reference: 215.0006
Intake pipe for POLINI CP carburettors or other flexible assemblies.
Reference: 215.0002
Pipe for small carburetors rigid or large carburetors flexible assembly!