
Reference: 19 3298E
MALOSSI MHR M6 X 18mm studs for exhaust, intake pipe ...
Set of 2 M6 studs which can be used for many applications.
Banner
Here is the MALOSSI Ø24mm intake pipe. It is modifiable to pass on bigger by cutting it and by putting a bigger sleeve. Specifically provided at the base for the carburetor MALOSSI 24mm.
It will be delivered with its two studs of 6mm by 18mm and its carburetor sleeve PHBL Ø20mm to 25mm and 37mm long, its two collar and its paper seal for maximum sealing.
Mounts on :
VESPA ETS 125
VESPA PK XL 125
VESPA PK HP 50
VESPA PK XL 50
Reference: 19 3298E
Set of 2 M6 studs which can be used for many applications.
Reference: 11251700
Replacement aluminum intake sleeve for your VESPA!
Reference: 215.0118
Valve system with flexible sleeve for increased power and torque!
Reference: 215.0005
Black painted steel pipe for 16/16 carburettors on VESPA 50 SPECIAL 2T.
Reference: 5304
Intake pipe for your SHBC 19.19 carburettor.
Reference: 215.0203
Unique and powerful design, POLINI monolamelle system for VESPA carburizing scooter in 19 or 21mm diameter with 2 fixing holes. For carburettors origin or CP POLINI!
Reference: 215.0272
The best way to mount a big PWK carburetor on your PIAGGIO APE by gaining performance!
Reference: 02 5084B
Ideal for improving and optimizing the performance of your PIAGGIO APE scooter.
Reference: 215.0006
Intake pipe for POLINI CP carburettors or other flexible assemblies.
Reference: 215.0162
Ideal for improving and optimizing the performance of your VESPA scooter.
Reference: 15801000
Replacement intake manifold for your VESPA!
Reference: 20 4709
Inlet pipe for MALOSSI carburettors or other soft mountings on your VESPA scooter.
Reference: 215.0117
Ideal to pass on a system has flaps and thus to gain in couple, power and consomation! To accompany a 17,5mm POLINI CP special for the best!
Reference: 215.0205
For improved intake (to pass over valve system) with carburettor POLINI CP or other flexible mounting in Ø22 to 26mm, fixing by 2 holes as the origin.
Reference: 215.0231
Unique and efficient design, POLINI mono-lamella system for VESPA scooter in diameter 19mm for POLINI or original carburetor with 3 fixing holes.
Reference: 20 5461
The best way to mount a large PHBL carburetor on your VESPA ETS and PK 50 or 125cc and increase your performance!
Reference: 215.0232
Ideal to pass on a system has flaps and thus to gain in couple, power and consomation! To accompany a 17,5mm POLINI CP special for the best!