Reference: 30434.M3 + 80039

Maxi kit SIMONINI 90cc Ø50mm aluminum (with 46mm stroke crankshaft) for minarelli am6

A 90cc engine pack, with kit and crankshaft, it is accompanied by good bearings, a clutch, a racing exhaust and a carburetion from Ø24 to 30mm.

Reference: 6808

Carburettor DELLORTO PHBE 30 HS choke with lever without separate greasing

A very good carburettor Ø30mm, ideal to accompany a high-performance engine.

Reference: 9910020

Clutch TOP PERFORMANCES Competition reduced Ø105 / 107mm with the choices for scooter minarelli (booster rocket, bw's, nitro

A clutch lightened and reinforced ideal to accompany any type of configuration.

Reference: 9355

VHST carburettor DELLORTO 26 flexible BS choke lever without separate greasing nor depression

A special big carburetor configuration! Lightweight, powerful, machined body in the best alloys, flat bushel ... a little monster for frank response and acceleration without limits!

Reference: 9356

Carburettor DELLORTO VHST 28 BS 2 flexible choke has lever without separate greasing nor depression

The flat bushel of high quality 28mm! Version BS2 true DELLORTO so with needle D48, well HH271, main jet 110 ...

Reference: S410010392001

High-voltage reel and CDI ATHENA Unbridled Racing for ignition DUCATI on am6, DERBI, piaggio scooter before 2000, ...

For unbridled ignition and a considerable increase in power thanks to its beach reviewed and corrected. For ignitions with 3 branches with mass.

Reference: 9920580

Set of 4 reinforced clutch springs 100kg TPR for minarelli am6

Ideal for strengthening your clutch! Competition springs for minarelli am6 engine.

Reference: 02 6639B

Flexible MALOSSI pipe Ø28 by 46mm for MALOSSI MG, Minarelli am6 and DERBI euro1,2 & 3

An intake pipe designed for large carburetion This pipe is short for faster recovery.

Reference: 3112376

Kit 80cc high engine Ø50mm MALOSSI MHR Team aluminum DERBI euro 1 & 2

The famous and recognized MALOSSI MHR TEAM 80cc, ultra powerful, torquey and ultra ultra strong! Simple but so good ...

Reference: 11 6695B

housings for joint Pack MB (G2 europe) MALOSSI competition MBK 51 / AV10

Ideal for reassembly without leakage with a quality seal.

Reference: 10404024

Half corrector PINASCO 34mm for scooter minarelli (booster rocket, bw's, nitro, ovetto ...)

Ideal for a gain of performance and recovery through its simplest and mounted longitudinally.

Reference: S1716

Clutch (discs, spacers, springs) reinforced SURFLEX Competition 5 filled discs for minarelli am6

A competition clutch in kevlar!

Reference: 80030

Crankshaft, connecting rod assembly race origin SIMONINI Racing axis Ø10 / 12mm vertical scooter minarelli (booster rocket, bws)

A linkage of perfect competition to strengthen your lower engine dramatically!

Reference: 10041403

Kit 70cc Ø47mm (axis of 10mm) cast PINASCO T-strength mono fascia Racing minarelli vertical (booster rocket, bws ...)

Reference: 064400

Kit 50cc aluminum air ATHENA racing Peugeot 103, fox & Honda wallaroo

A very powerful and very solid kit! Very high quality.

Reference: AM00026

Neutral position indicator switch TOP PERFORMANCES original type for minarelli am6

High quality replacement part TOP PERFORMANCES, essential to have the signal on the position of the neutral position on your mécaboite driving minarelli am6.

Reference: S410130320001

Crankshaft, connecting rod assembly ATHENA Racing race 39mm (bristles of Ø17mm) for mécaboite driving minarelli am6

A good crankshaft reinforced and in full masses for your minarelli am6 with bearings of origin size.

Reference: 02 6039B

MALOSSI angled pipe Ø19 by 24mm PHBG for MBK 51 / motobecane av10

A pipe created to match a 21 PHBG carburetor. This pipe is micro-blasted to prevent gas rebounds. Clearly it will mount a larger carburetor while gaining power.

Reference: 51 6921

Variator MALOSSI VARIOTOP small beach MBK 51, motobecane av10 / av7 normal silk

High performance on small inverter configuration.

Reference: 9908370

TOP PERFORMANCES RACING carbon valves for horizontal minarelli (nitro, ovetto, aerox, jog, dinli ...)

Valves of excellent quality, ideal racing model to accompany a prepared engine configuration.

Reference: 909.208

Nut clutch POLINI 28X1 for scooter minarelli (booster rocket, bw's, nitro, aerox ...)

Ideal in case of thread wear or other problems on your torque controller.