Reference: PX20
PX20 high voltage coil for MVT and DOPPLER ignition on scooter, mécaboite and cyclo
Ideal in case of wear or breakage of your old reel.
Banner
This kit is intended for minarelli am6 engines equipped with an original ignition DUCATI, following our tests, the installation on engine DERBI does not disturb anything! The power gain is from 7600 rpm and this kit allows you to overtake the 16 000 rounds against a clamping or malfunction to 11 000 or 13 200 turns on ignition source on motorcycles, this kit can really take full advantage of large kits , their powers and their times. For this plant, TOP PERFORMANCES has developed a curve and special mapping to maximize the power of the engines, especially at high speeds. The central CDI has a microprocessor on which the map is stored, this allows to have a ignition advance modified according to the variation and the number of engine revolutions.
The advance is shifted backward for the low-end torque and forward at high speeds so that the engine can take infinite turns. Huge power gained over a fixed lead, the fixed advance does not allow you the maximum power because the spark always come at the same time (the advance remains the same) despite the number of revolutions minutes, however a motor requires more or less in advance depending on his plan. In addition, TOP PERFORMANCES pushed this pack even further by opting for a separate, low-voltage, high-voltage ignition coil, giving you less ignition heat, improved mass, and extra spark power. The high-voltage wire included in the pack is a high-end cable, moreover TOP PERFORMANCES has added an antiparasite without competition resistance. What has a really powerful and ultra solid ignition, torque gain is really felt and the gain of high / mid speeds is breathtaking!
The pack contains :
CDI advance variable competition
High voltage coil of separate competition
Fixing Scratch for CDI
Anti-parasite competition
Instructions and assembly instructions
Attention, once the kit is installed, use only SP98 gasoline! More SP95 that could generate clatter! This pack is not to be used with the TOP PERFORMANCES 85cc and 86cc kits without removing the key offset ... At high speeds you would have too much advance, this will create overheating and risk of tightening. A beautiful pack of variable advance TOP PERFORMANCES RACING.
Reference: PX20
Ideal in case of wear or breakage of your old reel.
Reference: 171.0640
Ideal for repairing your ignitions POLINI 4 curves!
Reference: 450446
Coil with integrated CDI unbridled with 4 terminals with ground wire.
Reference: 180298
Coil with integrated CDI unbridled with 4 branches with mass, mark TNT.
Reference: EVB.1
High quality and guaranteed performance ignition coil SELETTRA ITALKIT for digital ignition with variable advance on moped, scooter and mécaboite.
Reference: EB.KZD.1
High quality and assured performance, SELETTRA ITALKIT ignition coil for variable digital ignition on moped, mécaboite, motorcycle, karting and scooter.
Reference: 5512791
Ideal for a huge performance gain without changing its ignition!
Reference: 15158
Coil with integrated CDI unbridled with 4 terminals with ground wire.
Reference: 478410
Coil with integrated CDI with 4 branches without mass.
Reference: 9910150
A real asset to prepare your original ignition and offer you a guaranteed power saving!
Reference: 503829
High voltage coil with integrated unbridled CDI with 2 lugs with ground wire and its high voltage wiring.
Reference: 93612634
Original reel with CDI integrated unbridled 4 branches without mass.
Reference: CA00009
Original coil with integrated CDI unbridled with 4 branches without mass.
Reference: S410010392001
For unbridled ignition and a considerable increase in power thanks to its beach reviewed and corrected. For ignitions with 3 branches with mass.
Reference: EB.KZA
High quality and guaranteed performance, SELETTRA ITALKIT ignition coil for analog ignition with fixed advance on moped, mécaboite and scooter.
Reference: 440149
Coil with integrated CDI unbridled 4 branches without mass.