Reference: 02022046
Cylinder / piston without cylinder head AIRSAL LUXURY SPORT 70cc Ø46mm aluminum for PEUGEOT air before 2007 (buxy, tkr, speedfig
Ideal in case of breakage, heating or motor clamp to a less expensive change.
Banner
Here is a small 70cc Spanish house AIRSAL, the model that we call luxury is the model TECH PISTON which features a high-end piston, this kit is also available in mono-segment SPORT home! This kit has certainly a cheap yet a good quality and present performance.
The cylinder is a treated aluminum nykasil of Ø46mm, it has 5 transfers, the side has the base are well worked and we recommend alignment to the base engine. Internally side are beautifully drawn, the exhaust is an oval pattern.
The diagrams are low enough to will pay with a small standard configuration exhaust relaxation + 21mm carburetor. The finish is not at the top but it is very correct in the price. The piston is the high quality model, it has no side oiler but 1mm 2 end segments, the upper segment is a hard chrome domed model.
The cylinder head is a high compression and the room is a polished hemispheric model. Moreover it comes with pebble 9.5gr for optimum adjustment. Clearly this cylinder is really a great value! It will be certainly less effective than MALOSSI MHR or Polini ... But he will remain already very good. A great torquey kit, ideal for riding every day because very solid (the countries or allows).
We recommend at least: 21mm carburetor with prepa boite a air + slices valves 0.30mm (original pipe, valves and original original diffuser flaps can be stored), exhaust racing, crankshaft and reinforced bearings, cold candle racing ...
The pack contains:
Fasteners muffler
Pack complete joint
Racing aluminum cylinder 5 transfers oval exhaust 46mm
Bi-piston segments
2 segments including a curved chrome for the top of the piston
notice
2 clips piston G
Piston Pin
6 Shingle 9.5gr
Cylinder head high compression
Optional we offer a preparation course 1, this preparation is a modification of the channels and the exhaust port by increasing the charts and improvement of the duct, it increases the cylinder performance. Improved piston and bottom skirt is also included in the amendment. Allow a little extra time for this preparation!
Mounts on motor scooter Peugeot 50cc 2-stroke vertical air:
-BUXY
-ELYSEO
-SPEEDAKE
-SEEDFIGHT 2 AC
AC -SPEEDFIGHT
-SQUAB
-TREKKER
-TKR
-VIVACITY
-ZENITH
And other models ...
Reference: 02022046
Ideal in case of breakage, heating or motor clamp to a less expensive change.
Reference: 06022046
A good quality piston comes complete for refurbishment of your cylinder.
Reference: 11022046
Segment high chrome range and already pre-rehearsed.
Reference: 14022046
A good seal pack a change to each motor winding for perfect Leakproof.
Reference: 04022046
The replacement head for your Ø46mm 70cc kit scooter Peugeot air before 2007!
Reference: 010224476
Escapement barrete, piston mono-segment, 47.6mm in diameter! A good little monster power!
Reference: 142.0147/R
A very well studied kit, touch up by hand to have as much performance as aluminum kits while enhancing the solidity of a cast iron kit.
Reference: CIL-730
A good kit without cylinder head, ideal to refurbish your engine with more performance!
Reference: CI.26.651.G
The only aluminum kit and the most powerful kit available for this engine architecture!
Reference: 010241476
This kit will offer more torque while keeping good reliability at a reasonable price.
Reference: 020224476
Ideal in case of breakage, heating or motor clamp to a less expensive change. If you already have a cylinder head 47,6mm.
Reference: 02042848
Cylinder piston with segments for scooter HONDDA VISION 80cc.
Reference: 142.0147
A high engine with a quality / price / performance ratio excellent! For us, one of the best in the market in 70cc Peugeot scooter.
Reference: CIL-705
Ideal together to improve performance, all at a lower cost!
Reference: 31 8640
A kit certainly a little less powerful than a team but which can surprise more than one.
Reference: 30425.M
A cylinder head without strong and torquey 70cc, ideal to optimize your performance. Equipped with 5 transfers, aluminum material with large exhaust and VERTEX piston mono segment.
Reference: KT00058
A high engine without strong and powerful 70cc cylinder head, ideal for increasing your performance.
Reference: 31 7133
A solid, reliable and high torque engine!
Reference: 02041946
Powerful and strong, this 70cc is an excellent quality / price / power!
Reference: 070600
A very powerful kit, even more powerful than the MALOSSI MHR REPLICA 70!
Reference: 02022046
Ideal in case of breakage, heating or motor clamp to a less expensive change.